breaking load

简明释义

断裂载重

英英释义

例句

1.A safety factor is often applied to the breaking load to account for unexpected stresses.

通常会对破坏载荷应用安全系数，以应对意外压力。

2.The bridge was designed to support a maximum breaking load of 100 tons.

这座桥的设计最大破坏载荷为100吨。

3.Before using the rope, always check its breaking load to ensure safety.

在使用绳索之前，务必检查其破坏载荷以确保安全。

4.The breaking load of the cable was tested under extreme conditions.

该电缆的破坏载荷在极端条件下进行了测试。

5.The engineer calculated the breaking load of the steel beam to prevent structural failure.

工程师计算了钢梁的破坏载荷以防止结构失效。

作文

Understanding the concept of breaking load is essential in various fields, especially in engineering and construction. The term breaking load refers to the maximum load or weight that a material or structure can bear before it fails or breaks. This concept is crucial for ensuring safety and reliability in the design and use of materials. Engineers must carefully calculate the breaking load of different materials to prevent catastrophic failures during their applications.For instance, when constructing a bridge, engineers must consider the breaking load of the materials used, such as steel and concrete. If the load exceeds the breaking load, the structure could collapse, leading to severe consequences. Therefore, understanding the breaking load helps engineers design safer structures that can withstand expected loads throughout their lifespan.Moreover, the breaking load is not a static value; it can change based on various factors, including temperature, humidity, and the presence of flaws in the material. For example, a steel cable may have a specific breaking load when new, but if it becomes corroded or damaged, its breaking load will decrease. This variability makes regular inspections and maintenance critical in industries where safety is paramount.In the field of textiles, the breaking load is also an important consideration. Fabrics are tested for their breaking load to ensure they can withstand the stresses they will encounter in use. For instance, climbing ropes are designed with a high breaking load to ensure they can support a climber's weight without breaking. Manufacturers must provide clear information about the breaking load of their products to ensure users can make informed decisions.In conclusion, the concept of breaking load is vital across various industries, from construction to textiles. Understanding how to calculate and apply the breaking load ensures safety and effectiveness in the use of materials. As we continue to innovate and develop new materials and structures, the importance of accurately determining the breaking load will remain a fundamental aspect of engineering and design. By prioritizing knowledge of the breaking load, we can create safer environments and products for society as a whole.

理解破断载荷的概念在各个领域都是至关重要的，尤其是在工程和建筑方面。术语破断载荷指的是材料或结构在失败或断裂之前能够承受的最大载荷或重量。这个概念对于确保材料设计和使用的安全性和可靠性至关重要。工程师必须仔细计算不同材料的破断载荷，以防止在应用过程中发生灾难性的故障。例如，在建造桥梁时，工程师必须考虑所用材料（如钢材和混凝土）的破断载荷。如果载荷超过了破断载荷，结构可能会坍塌，导致严重后果。因此，理解破断载荷有助于工程师设计出能够承受预期载荷的更安全的结构，确保其在使用寿命内的稳定性。此外，破断载荷不是一个静态值；它可以根据多种因素而变化，包括温度、湿度以及材料中存在的缺陷。例如，一根新的钢缆可能具有特定的破断载荷，但如果它受到腐蚀或损坏，其破断载荷将会降低。这种可变性使得定期检查和维护在安全至关重要的行业中显得尤为重要。在纺织品领域，破断载荷同样是一个重要的考虑因素。面料需要进行破断载荷测试，以确保它们能够承受使用中遇到的压力。例如，攀岩绳设计时需要具有高破断载荷，以确保能够支持攀登者的重量而不发生断裂。制造商必须提供有关其产品破断载荷的清晰信息，以确保用户能够做出明智的决策。总之，破断载荷的概念在各个行业中都至关重要，从建筑到纺织品。理解如何计算和应用破断载荷确保了材料使用的安全性和有效性。随着我们继续创新和开发新材料和结构，准确确定破断载荷的重要性将始终是工程和设计的基本方面。通过优先考虑对破断载荷的知识，我们可以为整个社会创造更安全的环境和产品。