maximum permissible exposure

简明释义

最大容许辐照量

英英释义

例句

1.The environmental report indicated that the factory's emissions were within the maximum permissible exposure 最大允许暴露量 limits set by the government.

环境报告指出，该工厂的排放量在政府设定的最大允许暴露量 最大允许暴露量限制范围内。

2.Before starting the experiment, the researcher confirmed the maximum permissible exposure 最大允许暴露量 for radiation was not exceeded.

在开始实验之前，研究人员确认辐射的最大允许暴露量 最大允许暴露量没有超过。

3.Workers are required to wear protective gear if they are exposed to levels above the maximum permissible exposure 最大允许暴露量 for chemicals.

如果工人接触到超过化学品的最大允许暴露量 最大允许暴露量，则必须穿戴防护装备。

4.The safety officer explained that the maximum permissible exposure 最大允许暴露量 to noise in the workplace is 85 decibels.

安全官员解释说，工作场所的最大允许暴露量 最大允许暴露量是85分贝。

5.Employees must be trained to understand the maximum permissible exposure 最大允许暴露量 levels for various hazardous materials.

员工必须接受培训，以了解各种危险材料的最大允许暴露量 最大允许暴露量水平。

作文

In today's world, where technology is advancing at an unprecedented rate, the importance of understanding safety standards cannot be overstated. One crucial term that often comes up in discussions about occupational safety and health is maximum permissible exposure. This term refers to the highest level of exposure to a hazardous substance or environment that a worker can be subjected to without experiencing adverse effects on their health. Understanding this concept is vital for ensuring the safety of workers in various industries, particularly those exposed to chemicals, radiation, or loud noises.The significance of maximum permissible exposure is particularly evident in industries such as construction, manufacturing, and healthcare. For instance, workers in construction sites are often exposed to loud machinery and tools, which can lead to hearing loss if proper precautions are not taken. Regulatory bodies have established guidelines for maximum permissible exposure to noise levels, ensuring that workers are not subjected to harmful decibels for extended periods. By adhering to these guidelines, employers can protect their employees from long-term health issues, thereby fostering a safer workplace.Similarly, in the field of healthcare, professionals may encounter hazardous substances such as chemicals used in laboratory settings or infectious materials. The maximum permissible exposure levels for these substances are set to minimize the risk of illness or injury among healthcare workers. Training programs and safety protocols are implemented to ensure that workers are aware of these limits and take necessary precautions, such as wearing protective gear and using proper ventilation systems.Moreover, the concept of maximum permissible exposure extends beyond physical hazards. Psychological stressors in the workplace, such as excessive workloads or hostile work environments, can also impact employee health. While it may not be quantified in the same way as chemical exposure, organizations are increasingly recognizing the need to establish acceptable limits for psychological stress to maintain a healthy workforce. By addressing these factors, companies can improve employee morale and productivity, ultimately benefiting their bottom line.In addition to protecting workers, understanding maximum permissible exposure is also crucial for regulatory compliance. Governments and organizations worldwide have established strict regulations regarding exposure limits in various industries. Failure to comply with these regulations can result in severe penalties, including fines and legal action. Therefore, businesses must stay informed about the latest guidelines and ensure that they are taking appropriate measures to adhere to them.In conclusion, the concept of maximum permissible exposure plays a vital role in safeguarding the health and well-being of workers across various sectors. By understanding and implementing these exposure limits, employers can create safer work environments, protect their employees from potential hazards, and ensure compliance with regulatory standards. As we continue to advance technologically, it is imperative that we prioritize safety and health in the workplace, making maximum permissible exposure a fundamental aspect of occupational health and safety practices.

在当今科技以空前速度发展的世界中，理解安全标准的重要性不容小觑。一个在讨论职业安全和健康时经常出现的关键术语是最大允许暴露量。这个术语指的是工人可以接触到的有害物质或环境的最高暴露水平，而不会对他们的健康产生不良影响。理解这一概念对于确保各行业工人的安全至关重要，特别是那些接触化学品、辐射或噪声的行业。最大允许暴露量的重要性在建筑、制造和医疗等行业中尤为明显。例如，建筑工地的工人通常会接触到嘈杂的机械和工具，如果不采取适当的预防措施，可能会导致听力损失。监管机构已制定了噪音水平的最大允许暴露量指导方针，以确保工人在长时间内不接触有害的分贝。通过遵守这些指导方针，雇主可以保护员工免受长期健康问题的影响，从而促进更安全的工作场所。同样，在医疗领域，专业人员可能会接触到实验室环境中使用的危险物质或传染性材料。这些物质的最大允许暴露量被设定为最小化医疗工作者生病或受伤的风险。培训项目和安全协议的实施确保工人了解这些限制并采取必要的预防措施，例如佩戴防护装备和使用适当的通风系统。此外，最大允许暴露量的概念不仅限于物理危害。工作场所中的心理压力源，例如过重的工作负担或敌对的工作环境，也会影响员工的健康。虽然它可能不像化学暴露那样量化，但各组织越来越认识到需要建立心理压力的可接受限度，以维持健康的劳动力。通过解决这些因素，公司可以改善员工士气和生产力，最终使其利润受益。除了保护工人，理解最大允许暴露量对于合规性也至关重要。全球各国政府和组织已就各行业的暴露限值制定了严格的规定。不遵守这些规定可能导致严重的处罚，包括罚款和法律诉讼。因此，企业必须及时了解最新的指导方针，并确保采取适当措施以遵守这些规定。总之，最大允许暴露量的概念在保护各行业工人的健康和福祉方面发挥着至关重要的作用。通过理解和实施这些暴露限制，雇主可以创造更安全的工作环境，保护员工免受潜在危害，并确保遵守监管标准。随着我们在技术上不断进步，优先考虑工作场所的安全和健康显得尤为重要，使得最大允许暴露量成为职业健康和安全实践的基本方面。