contaminated steam

简明释义

污染蒸气

英英释义

例句

1.During the inspection, we found that the contaminated steam (受污染的蒸汽) was affecting the quality of the final product.

在检查过程中，我们发现contaminated steam (受污染的蒸汽) 正在影响最终产品的质量。

2.Proper filtration systems are essential to prevent contaminated steam (受污染的蒸汽) from entering the production line.

适当的过滤系统对于防止contaminated steam (受污染的蒸汽) 进入生产线至关重要。

3.The safety report highlighted incidents involving contaminated steam (受污染的蒸汽) in the chemical plant.

安全报告强调了化工厂中涉及到的contaminated steam (受污染的蒸汽) 事件。

4.Workers were advised to wear protective gear when dealing with contaminated steam (受污染的蒸汽) to avoid exposure.

工人们被建议在处理contaminated steam (受污染的蒸汽) 时穿戴防护装备，以避免暴露。

5.The factory had to shut down production due to a leak of contaminated steam (受污染的蒸汽) that posed health risks to workers.

由于泄漏了可能对工人健康构成威胁的contaminated steam (受污染的蒸汽)，工厂不得不停止生产。

作文

In the modern world, steam is often utilized in various industrial processes, including power generation, food processing, and chemical manufacturing. However, one critical issue that arises in these applications is the presence of contaminated steam, which can lead to significant operational challenges and health risks. Understanding what contaminated steam is and how it can affect both industries and consumers is essential for maintaining safety and efficiency in steam applications.Contaminated steam refers to steam that has been polluted or tainted by harmful substances, such as chemicals, oils, or biological contaminants. This contamination can occur at multiple stages, from the source of water used for steam generation to the equipment involved in the heating process. For instance, if the water used to produce steam contains impurities, these impurities can vaporize along with the steam, leading to contaminated steam. Similarly, if the steam comes into contact with surfaces that have not been properly cleaned or maintained, it can pick up residues that may pose health risks.The implications of using contaminated steam are far-reaching. In the food industry, for example, steam is often employed to cook or sanitize food products. If the steam is contaminated, it could introduce harmful pathogens or chemicals into food, posing serious health risks to consumers. This is particularly concerning in an era where food safety is paramount, and any lapse can lead to widespread illnesses or even fatalities.In power generation, contaminated steam can cause significant damage to turbines and other machinery. Contaminants can lead to corrosion, scaling, and other forms of wear and tear, ultimately resulting in costly repairs and downtime. The presence of contaminated steam can also reduce the efficiency of energy production, leading to increased operational costs and a larger carbon footprint.To combat the issue of contaminated steam, industries must implement rigorous testing and maintenance protocols. Regular monitoring of water quality is crucial to ensure that the steam generated is safe and clean. Additionally, proper filtration systems should be installed to remove potential contaminants before the steam is produced. Equipment should also be routinely inspected and cleaned to minimize the risk of contamination.Education and training of personnel are equally important in addressing the challenges posed by contaminated steam. Workers should be aware of the sources and risks associated with steam contamination and be trained in best practices for handling steam safely. By fostering a culture of safety and awareness, industries can significantly reduce the likelihood of issues arising from contaminated steam.In conclusion, the significance of contaminated steam in various industries cannot be overstated. It poses serious risks to health, safety, and operational efficiency. By understanding its implications and taking proactive measures to prevent contamination, industries can protect their workers, consumers, and equipment. As we continue to rely on steam for numerous applications, addressing the issue of contaminated steam will remain a priority for ensuring safety and sustainability in our modern world.

在现代世界中，蒸汽常常用于各种工业过程，包括发电、食品加工和化学制造。然而，在这些应用中出现的一个关键问题是存在受污染的蒸汽，这可能导致重大操作挑战和健康风险。了解受污染的蒸汽是什么以及它如何影响工业和消费者，对于保持蒸汽应用的安全性和效率至关重要。受污染的蒸汽是指被有害物质如化学品、油或生物污染物污染或污染的蒸汽。这种污染可以在多个阶段发生，从用于蒸汽生成的水源到加热过程中的设备。例如，如果用于产生蒸汽的水含有杂质，这些杂质可能会与蒸汽一起蒸发，从而导致受污染的蒸汽。同样，如果蒸汽接触到未经过适当清洁或维护的表面，它可能会吸附残留物，这可能构成健康风险。使用受污染的蒸汽的影响是深远的。在食品行业中，例如，蒸汽通常用于烹饪或消毒食品产品。如果蒸汽受到污染，可能会将有害病原体或化学物质引入食品，对消费者构成严重健康风险。这在食品安全至关重要的时代尤其令人担忧，任何疏忽都可能导致广泛的疾病甚至死亡。在发电领域，受污染的蒸汽可能对涡轮机和其他机械设备造成重大损害。污染物可能导致腐蚀、结垢和其他形式的磨损，最终导致昂贵的维修和停机时间。受污染的蒸汽的存在还可能降低能源生产的效率，导致运营成本增加和更大的碳足迹。为了解决受污染的蒸汽的问题，行业必须实施严格的测试和维护协议。定期监测水质对于确保生成的蒸汽安全和清洁至关重要。此外，应安装适当的过滤系统，以在产生蒸汽之前去除潜在污染物。设备还应定期检查和清洁，以最小化污染的风险。人员的教育和培训在解决受污染的蒸汽所带来的挑战中同样重要。工人应了解蒸汽污染的来源和风险，并接受安全处理蒸汽的最佳实践培训。通过培养安全和意识的文化，行业可以显著减少因受污染的蒸汽而产生的问题的可能性。总之，受污染的蒸汽在各个行业中的重要性不容小觑。它对健康、安全和运营效率构成严重风险。通过理解其影响并采取积极措施防止污染，行业可以保护其工人、消费者和设备。随着我们继续依赖蒸汽用于众多应用，解决受污染的蒸汽的问题将始终是确保我们现代世界安全和可持续发展的优先事项。