straight runs of pipe

简明释义

管路的直线部分

英英释义

例句

1.We found that the straight runs of pipe were easier to install than the curved sections.

我们发现直管段比弯曲部分更容易安装。

2.Using straight runs of pipe can help reduce the risk of leaks in the plumbing system.

使用直管段可以帮助减少水管系统中漏水的风险。

3.For the new installation, we need to ensure that all straight runs of pipe are properly aligned.

对于新安装，我们需要确保所有的直管段都正确对齐。

4.The engineer recommended using straight runs of pipe to minimize pressure loss in the system.

工程师建议使用直管段以最小化系统中的压力损失。

5.The contractor specified that all straight runs of pipe should be at least 10 feet long.

承包商规定所有的直管段应至少为10英尺长。

作文

In the world of plumbing and piping, the term straight runs of pipe refers to sections of piping that are installed in a linear fashion without any bends or curves. This concept is crucial for ensuring the efficient flow of liquids or gases through a system. When designing a plumbing layout, engineers often aim to maximize the length of straight runs of pipe because they minimize resistance and turbulence, which can lead to pressure drops and inefficiencies. One of the primary advantages of using straight runs of pipe is that they allow for easier maintenance and inspection. When pipes are straight, it becomes simpler to identify blockages or leaks. In contrast, pipes with numerous bends may hide problems, making it difficult for technicians to diagnose issues without extensive investigation. This is particularly important in industrial settings where downtime can be costly. Moreover, straight runs of pipe are generally more cost-effective to install. The labor required to fit and secure pipes that need to bend and curve is usually higher than that for straight sections. Additionally, fewer fittings are needed, which can reduce material costs. In many cases, the installation of straight runs of pipe can lead to a more streamlined and efficient system overall.However, achieving long straight runs of pipe can sometimes be challenging due to space constraints or the layout of existing structures. In residential plumbing, for instance, the need to navigate around walls, appliances, and other fixtures can limit the length of straight sections. As a result, plumbers must carefully plan their designs to incorporate as many straight runs of pipe as possible while still accommodating the necessary bends and turns.In addition to practical considerations, the use of straight runs of pipe also has implications for the design aesthetic of a space. In modern architecture, there is often an emphasis on clean lines and minimalistic designs. Exposed piping that features long, straight sections can contribute to this aesthetic, providing a sleek and industrial look that is popular in contemporary settings.In conclusion, straight runs of pipe play a vital role in the design and functionality of plumbing systems. Their benefits include improved flow efficiency, easier maintenance, cost savings, and aesthetic appeal. As engineers and plumbers continue to innovate and adapt to new challenges, the importance of incorporating straight runs of pipe into their designs will remain a fundamental principle in the field of plumbing and piping.

在管道和管道的世界中，短语straight runs of pipe指的是以线性方式安装的管道段，没有任何弯曲或曲线。这个概念对于确保液体或气体在系统中有效流动至关重要。在设计管道布局时，工程师通常旨在最大化straight runs of pipe的长度，因为它们可以最小化阻力和湍流，这可能导致压力下降和效率降低。使用straight runs of pipe的主要优点之一是它们允许更容易的维护和检查。当管道是直的时，识别堵塞或泄漏变得简单。相比之下，拥有众多弯曲的管道可能会隐藏问题，使技术人员在没有广泛调查的情况下难以诊断问题。这在工业环境中特别重要，因为停工时间可能会非常昂贵。此外，安装straight runs of pipe通常更具成本效益。需要弯曲和固定的管道所需的劳动通常高于直线部分。此外，所需的配件较少，这可以减少材料成本。在许多情况下，安装straight runs of pipe可以导致整体上更简化和高效的系统。然而，由于空间限制或现有结构的布局，实现长的straight runs of pipe有时可能是具有挑战性的。例如，在住宅管道中，绕过墙壁、电器和其他装置的需要可能会限制直线部分的长度。因此，水管工必须仔细规划他们的设计，以尽可能多地结合straight runs of pipe，同时仍然适应必要的弯曲和转弯。除了实际考虑之外，使用straight runs of pipe还对空间的设计美学产生影响。在现代建筑中，通常强调干净的线条和简约的设计。暴露的管道如果具有长的直线部分，可以为这种美学做出贡献，提供一种流畅和工业的外观，这在当代环境中很受欢迎。总之，straight runs of pipe在管道系统的设计和功能中发挥着至关重要的作用。它们的好处包括改善流动效率、便于维护、节省成本和美学吸引力。随着工程师和水管工继续创新并适应新的挑战，将straight runs of pipe纳入他们设计的重要性将始终是管道和管道领域的基本原则。