inlet diverter

简明释义

1. 分离器进口折流装瞒; 2. 入口分流器; 3. 油气分离器的入口分流器;

英英释义

例句

1.The engineer installed the inlet diverter to redirect water flow into the main drainage system.

工程师安装了进水分流器以将水流引导到主排水系统。

2.An inlet diverter can be crucial in maintaining proper water levels in a reservoir.

一个进水分流器在维持水库的适当水位方面可能至关重要。

3.The construction crew adjusted the inlet diverter to improve the efficiency of the stormwater management system.

施工队调整了进水分流器以提高雨水管理系统的效率。

4.We noticed that the inlet diverter was clogged, which caused water to back up in the system.

我们注意到进水分流器被堵塞，这导致水在系统中回流。

5.During heavy rains, the inlet diverter helps prevent flooding by channeling excess water away.

在暴雨期间，进水分流器通过引导多余的水流来帮助防止洪水。

作文

The concept of an inlet diverter plays a crucial role in various engineering applications, particularly in fluid dynamics and environmental management. An inlet diverter is essentially a device designed to redirect the flow of water or other fluids at an entry point, ensuring that the flow is managed effectively to prevent contamination and maintain the quality of the water source. This is especially important in areas where stormwater runoff can carry pollutants into water bodies, thus necessitating the use of such devices to protect ecosystems and human health.To understand the significance of an inlet diverter, we must first consider its function. In many urban settings, rainwater can pick up debris, chemicals, and other harmful substances as it flows over surfaces like roads and parking lots. Without proper management, this contaminated water can enter drainage systems and ultimately reach rivers, lakes, or oceans. Here, an inlet diverter comes into play by intercepting this flow at the inlet of a drainage system. It is designed to separate clean water from contaminated water, allowing for more effective treatment and filtration processes before the water is discharged into natural bodies.Moreover, the design of an inlet diverter can vary significantly depending on the specific requirements of the project. Some diverters are simple structures made of concrete or metal, while others may incorporate advanced technology such as sensors and automated systems to monitor water quality. These modern inlet diverters can provide real-time data on pollutant levels, helping engineers and environmental scientists make informed decisions about water management practices.In addition to environmental protection, inlet diverters also contribute to infrastructure resilience. By managing stormwater effectively, they help reduce the risk of flooding in urban areas. Flooding can cause significant damage to property and pose risks to public safety. Therefore, incorporating inlet diverters into urban planning and infrastructure development is essential for creating sustainable cities that can withstand the impacts of climate change.Furthermore, the benefits of inlet diverters extend beyond immediate environmental concerns. They also promote community awareness and engagement regarding water conservation and pollution prevention. By implementing visible and effective inlet diverters, municipalities can educate the public about the importance of clean water and encourage responsible behaviors that protect local waterways.In conclusion, the inlet diverter serves as a vital tool in the management of water resources, addressing both environmental and infrastructural challenges. Its ability to effectively redirect and filter water flows highlights the importance of innovative engineering solutions in promoting sustainable practices. As urbanization continues to increase, the need for efficient water management systems, including inlet diverters, will become even more critical in safeguarding our natural resources and ensuring a cleaner, healthier environment for future generations.

“进口分流器”是一个在许多工程应用中至关重要的概念，特别是在流体动力学和环境管理方面。“进口分流器”基本上是一种装置，旨在在入口点重新定向水或其他流体的流动，确保有效管理流动，以防止污染并维护水源的质量。这在暴雨径流可能将污染物带入水体的地区尤其重要，因此需要使用这样的装置来保护生态系统和人类健康。要理解“进口分流器”的重要性，我们首先必须考虑它的功能。在许多城市环境中，雨水在流过道路和停车场等表面时，可能会携带碎屑、化学物质和其他有害物质。如果没有适当的管理，这些受污染的水可能会进入排水系统，并最终到达河流、湖泊或海洋。在这里，“进口分流器”发挥了作用，它在排水系统的进口处拦截这些流动。它旨在将清水与受污染的水分开，从而在水排放到自然水体之前，允许更有效的处理和过滤过程。此外，“进口分流器”的设计可以根据项目的具体要求而有很大差异。一些分流器是由混凝土或金属制成的简单结构，而其他分流器可能会结合传感器和自动化系统等先进技术，以监测水质。这些现代“进口分流器”可以提供有关污染物水平的实时数据，帮助工程师和环境科学家就水管理实践做出明智的决策。除了环境保护之外，“进口分流器”还促进了基础设施的弹性。通过有效管理暴雨水，它们有助于减少城市地区洪水的风险。洪水可能对财产造成重大损害，并对公共安全构成威胁。因此，在城市规划和基础设施开发中纳入“进口分流器”对于创造能够承受气候变化影响的可持续城市至关重要。此外，“进口分流器”的益处不仅限于直接的环境问题。它们还促进了社区对水资源保护和防止污染的意识和参与。通过实施可见且有效的“进口分流器”，市政当局可以教育公众有关清水的重要性，并鼓励保护当地水道的负责任行为。总之，“进口分流器”作为水资源管理中的重要工具，解决了环境和基础设施的挑战。它有效重新定向和过滤水流的能力突显了创新工程解决方案在促进可持续实践中的重要性。随着城市化的不断增加，对高效水管理系统（包括“进口分流器”）的需求将变得更加关键，以保护我们的自然资源，确保未来几代人拥有更清洁、更健康的环境。