flushing oil

简明释义

洗涤油

英英释义

例句

1.The technician recommended using flushing oil to clean the engine before the new oil is added.

技术人员建议在添加新油之前使用冲洗油来清洁发动机。

2.Using flushing oil can help extend the life of your vehicle's engine.

使用冲洗油可以帮助延长您车辆发动机的使用寿命。

3.After a long season of use, it's important to run flushing oil through the system to remove any sludge.

经过一个长季节的使用后，重要的是要通过系统运行冲洗油以去除任何污泥。

4.To ensure optimal performance, we used flushing oil during the maintenance procedure.

为了确保最佳性能，我们在维护过程中使用了冲洗油。

5.The manual specifies that flushing oil should be used every 10,000 miles.

手册指定每行驶10,000英里应使用一次冲洗油。

作文

In the world of machinery and automotive engineering, maintaining optimal performance is crucial. One of the essential practices in this field is the use of flushing oil, which plays a significant role in ensuring the longevity and efficiency of engines and other mechanical systems. Flushing oil (冲洗油) is specifically formulated to clean and remove contaminants from the internal components of engines and lubrication systems. It serves as a cleaning agent that helps to dislodge sludge, varnish, and other deposits that accumulate over time due to the breakdown of regular engine oils. When an engine runs, it generates heat and friction, which can lead to the formation of harmful deposits. These deposits can hinder the engine's performance, reduce fuel efficiency, and ultimately lead to more severe mechanical issues if not addressed. This is where flushing oil comes into play. By circulating through the engine, flushing oil effectively cleans the surfaces of critical components, ensuring that they operate smoothly and efficiently.The process of using flushing oil typically involves draining the old engine oil and replacing it with the flushing agent. The vehicle is then run for a short period, allowing the flushing oil to circulate and dissolve any accumulated debris. Afterward, the flushing oil is drained, and fresh engine oil is added. This two-step process not only cleans the engine but also prepares it for the new oil, ensuring better lubrication and protection against wear and tear.Using flushing oil can be particularly beneficial for older vehicles or those that have been neglected in terms of regular maintenance. For instance, if a car has been running on low-quality oil or has not had an oil change in a long time, the buildup of contaminants can be significant. In such cases, a flush with flushing oil can restore some of the engine's performance and extend its lifespan.Moreover, flushing oil is not limited to just engines. It can also be used in hydraulic systems, transmissions, and other machinery that require clean operating conditions. Regularly using flushing oil as part of a maintenance routine can prevent costly repairs and improve the overall efficiency of equipment.However, it is essential to note that flushing oil should be used judiciously. Not all engines may require a flush, and in some cases, excessive flushing can lead to the dislodging of too much debris, potentially causing blockages in oil passages. Therefore, it is advisable to consult with a professional mechanic or follow the manufacturer’s guidelines before deciding to use flushing oil.In conclusion, flushing oil (冲洗油) is a valuable tool in the maintenance of engines and machinery. Its ability to clean and remove harmful deposits makes it an essential part of keeping mechanical systems running smoothly. By incorporating flushing oil into regular maintenance practices, vehicle owners can ensure their engines remain in peak condition, ultimately saving money on repairs and improving performance over time.

在机械和汽车工程的世界中，保持最佳性能至关重要。在这一领域中的一项基本实践就是使用冲洗油，它在确保发动机和其他机械系统的长寿和效率方面发挥着重要作用。冲洗油（flushing oil）专门配方用于清洁并去除发动机和润滑系统内部组件的污染物。它作为一种清洁剂，有助于松动由于常规发动机油降解而积累的污泥、清漆和其他沉积物。当发动机运转时，会产生热量和摩擦，这可能导致有害沉积物的形成。这些沉积物会妨碍发动机的性能，降低燃油效率，并最终导致更严重的机械问题，因此需要解决。这就是冲洗油发挥作用的地方。通过在发动机中循环，冲洗油有效地清洁关键组件的表面，确保它们平稳高效地运行。使用冲洗油的过程通常涉及排放旧的发动机油，并用清洗剂替换。然后，车辆会运行一段短时间，让冲洗油循环并溶解任何积累的碎屑。之后，排放冲洗油，再添加新鲜的发动机油。这个两步过程不仅清洁了发动机，还为新油做好准备，确保更好的润滑和对磨损的保护。使用冲洗油对于老旧车辆或在定期维护方面被忽视的车辆特别有益。例如，如果一辆车一直使用低质量的油或很长时间没有更换油，污染物的积累可能会非常严重。在这种情况下，使用冲洗油可以恢复发动机的一部分性能并延长其使用寿命。此外，冲洗油不仅限于发动机。它还可以用于液压系统、变速箱和其他需要清洁操作条件的机器。定期将冲洗油纳入维护例程可以防止昂贵的维修并提高设备的整体效率。然而，值得注意的是，冲洗油应谨慎使用。并非所有发动机都需要清洗，在某些情况下，过度清洗可能会导致太多碎屑脱落，从而可能导致油道堵塞。因此，在决定使用冲洗油之前，建议咨询专业机械师或遵循制造商的指导。总之，冲洗油（flushing oil）是发动机和机械维护中的一种宝贵工具。它清洁和去除有害沉积物的能力使其成为保持机械系统平稳运行的重要组成部分。通过将冲洗油纳入定期维护实践，车辆所有者可以确保他们的发动机保持在最佳状态，从而最终节省维修费用并改善长期性能。