limiting stop for the maximum fuel charge

简明释义

燃油最大供给量限制器

英英释义

例句

1.The ground crew was instructed to adhere to the limiting stop for the maximum fuel charge during refueling operations.

地面工作人员被指示在加油操作中遵守最大燃油充装的限制停止点。

2.The engineer explained how to calculate the limiting stop for the maximum fuel charge based on flight distance and payload.

工程师解释了如何根据飞行距离和有效载荷计算最大燃油充装的限制停止点。

3.To comply with safety regulations, the limiting stop for the maximum fuel charge was adjusted before the long-haul flight.

为了遵守安全规定，在长途航班前调整了最大燃油充装的限制停止点。

4.Before departing, the pilot set the limiting stop for the maximum fuel charge to ensure the aircraft would not exceed its weight limit.

在起飞前，飞行员设置了最大燃油充装的限制停止点，以确保飞机不会超出重量限制。

5.During the pre-flight checklist, verifying the limiting stop for the maximum fuel charge is crucial.

在起飞前检查清单中，验证最大燃油充装的限制停止点是至关重要的。

作文

In the realm of aviation and aerospace engineering, understanding various terminologies is crucial for safety and efficiency. One such term that has garnered attention is the limiting stop for the maximum fuel charge. This phrase refers to a specific operational parameter that determines the maximum amount of fuel that can be loaded onto an aircraft or spacecraft at any given time. The limiting stop for the maximum fuel charge is essential because it ensures that the vehicle does not exceed its structural limits or operational capabilities. When an aircraft is being prepared for flight, several factors come into play. Weight is a critical consideration, as it directly affects the aircraft's performance, including its takeoff, flight, and landing capabilities. The limiting stop for the maximum fuel charge is established based on the aircraft's maximum takeoff weight (MTOW) and the weight of other necessary components, such as passengers, cargo, and equipment. By adhering to this limit, pilots and ground crew can ensure that the aircraft remains within safe operating parameters.Moreover, the limiting stop for the maximum fuel charge also plays a significant role in fuel efficiency and cost management. Airlines strive to optimize their fuel loads to minimize operational costs while maximizing profitability. Loading more fuel than necessary can lead to increased weight, which in turn requires more power to lift off and maintain flight. This can result in higher fuel consumption and increased wear and tear on the aircraft. Therefore, understanding and applying the limiting stop for the maximum fuel charge is vital for economic operation.In addition to operational efficiency, the limiting stop for the maximum fuel charge is also a matter of safety. Overloading an aircraft with fuel can lead to catastrophic failures, especially during critical phases of flight such as takeoff and landing. Engineers and regulatory bodies have established strict guidelines and checks to ensure that the limiting stop for the maximum fuel charge is adhered to at all times. This includes pre-flight inspections and calculations that take into account the current weight of the aircraft and the amount of fuel required for the intended journey.Furthermore, advancements in technology have allowed for better monitoring and management of fuel loads. Modern aircraft are equipped with sophisticated systems that provide real-time data on fuel levels and weight distributions. These systems help pilots make informed decisions regarding fuel loading and can automatically adjust fuel loads to meet the limiting stop for the maximum fuel charge without compromising safety or efficiency.In conclusion, the concept of the limiting stop for the maximum fuel charge is integral to the aviation industry. It encapsulates the balance between operational efficiency, safety, and economic viability. As air travel continues to evolve, understanding and applying this principle will remain essential for ensuring safe and efficient operations in the skies. Whether you are a pilot, engineer, or simply an aviation enthusiast, grasping the significance of the limiting stop for the maximum fuel charge will enhance your appreciation of the complexities involved in modern flight operations.

在航空和航天工程领域，理解各种术语对于安全和效率至关重要。其中一个引起关注的术语是最大燃料充装的限制停止。这个短语指的是在任何给定时刻可以加注到飞机或航天器上的最大燃料量的特定操作参数。最大燃料充装的限制停止是必不可少的，因为它确保飞行器不会超过其结构极限或操作能力。当飞机准备起飞时，多个因素会发挥作用。重量是一个关键考虑因素，因为它直接影响飞机的性能，包括起飞、飞行和着陆能力。最大燃料充装的限制停止是根据飞机的最大起飞重量（MTOW）以及其他必要组件的重量（如乘客、货物和设备）确定的。通过遵守这一限制，飞行员和地勤人员可以确保飞机保持在安全的操作参数内。此外，最大燃料充装的限制停止在燃料效率和成本管理中也发挥着重要作用。航空公司努力优化燃料负载，以最小化运营成本，同时最大化盈利。装载超过必要的燃料可能导致重量增加，从而需要更多动力来起飞和维持飞行。这可能导致更高的燃料消耗和对飞机的额外磨损。因此，理解和应用最大燃料充装的限制停止对于经济运营至关重要。除了运营效率外，最大燃料充装的限制停止也是安全问题。过度装载燃料的飞机可能在飞行的关键阶段（如起飞和着陆）导致灾难性故障。工程师和监管机构制定了严格的指南和检查，以确保始终遵守最大燃料充装的限制停止。这包括出发前的检查和计算，考虑到飞机当前的重量和所需的燃料量。此外，技术的进步使得燃料负载的监测和管理变得更加有效。现代飞机配备了复杂的系统，提供实时的燃料水平和重量分布数据。这些系统帮助飞行员做出关于燃料装载的明智决策，并可以自动调整燃料负载，以满足最大燃料充装的限制停止而不影响安全或效率。总之，最大燃料充装的限制停止的概念对于航空业至关重要。它概括了运营效率、安全性和经济可行性之间的平衡。随着航空旅行的不断发展，理解和应用这一原则将继续是确保空中安全和高效运营的关键。无论您是飞行员、工程师还是单纯的航空爱好者，掌握最大燃料充装的限制停止的重要性将增强您对现代飞行操作中复杂性的欣赏。