cotter
简明释义
n. 制销;栓;佃农
vt. 用销固定
n. (Cotter)人名;(西、罗、葡)科特尔;(英)科特
英英释义
A cotter is a fastener used to secure a bolt or pin in place, typically consisting of a small metal pin that fits through a hole in the bolt or pin. | cotter是一种用于固定螺栓或销钉的紧固件,通常由一个小金属销组成,该销穿过螺栓或销钉上的孔。 |
单词用法
开口销 |
同义词
销 | 这个销被用来将两块固定在一起。 | ||
螺栓 | 他拧紧了螺栓,以确保一切稳定。 | ||
紧固件 | 紧固件对于保持组件到位是必不可少的。 |
反义词
螺栓 | 这个螺栓将两块金属牢牢固定在一起。 | ||
螺丝 | 确保使用适合这项工作的螺丝。 |
例句
1.Install the cotter pin to the nut for the right aft mount.
将右后吊点的螺母装上开口销。
2.On the morrow he would draft orders for Cotter Pyke.
明天他就就要给卡特·派克签署命令。
3.In this paper, the precise measuring system for cylindrical cotter with no - contact is introduced.
介绍了圆柱销的无接触精密检测系统,阐述了其光学系统、信号处理系统的工作原理。
4.The cotter pin are stainless steel, the other parts hot-dip galvanized steel.
闭口销为不锈钢铸件,其余为热镀锌钢制件。
5.You should hear what Cotter says of you.
你应该听听他是怎么说你的。
6.Cotter Pyke had sent a raven ahead to advise them of the banker's coming.
卡特·派克早就派了信鸦通知他们银行家的到来。
7.The clamp body and keepers malleable iron, cotter-pins are stainless steel, the other parts are steel. All ferrous parts are hot-dip galvanized.
线夹和压板为铝合金制件,闭口销为不锈钢制件,其余为热镀锌钢制件。
8.The best solution he could see would mean dispatching her to Eastwatch and asking Cotter Pyke to put her on a ship to someplace across the sea, beyond the reach of all these quarrelsome Kings.
最好的做法是把她送至东海望,让卡特·派克照看她登船航行至大洋彼岸,远离纷争不断的诸王。
9.All the pins should install the cotter pins on it, and open the cotter pins.
所有销轴都要装上开口销,并将开口销打开。
10.The cotter pin is essential for keeping the parts together.
销钉是保持部件连接的重要组成部分。
11.He removed the cotter to disassemble the machinery.
他拆除了销钉以便拆解机器。
12.The mechanic used a cotter to secure the wheel in place.
机械师使用了一个销钉来固定车轮。
13.The cotter broke during the assembly, so we had to replace it.
装配过程中销钉断了,所以我们不得不更换它。
14.Make sure to tighten the cotter before taking the bike out for a ride.
在骑自行车之前,请确保拧紧销钉。
作文
In the world of mechanical engineering and construction, every small component plays a significant role in ensuring the overall functionality and safety of structures and machines. One such important component is the cotter, which is used to secure two or more parts together. The cotter is typically a small, tapered pin or a wedge that fits into a slot or hole, preventing the parts from moving apart. Understanding the function and application of a cotter is essential for anyone involved in assembling or maintaining machinery.The design of a cotter may vary depending on its specific use, but its primary purpose remains the same: to provide a reliable connection between components. For instance, in the assembly of a bicycle, cotters are often used to secure the crank arms to the bottom bracket. Without these small yet crucial pieces, the bike would not function properly, and safety would be compromised.Another common application of cotters can be found in the automotive industry. In vehicles, cotters are used to hold various parts together, such as connecting rods in an engine. The failure of a cotter could lead to catastrophic results, including engine failure or accidents, highlighting the importance of quality and proper installation.Beyond their mechanical applications, cotters also have historical significance. In ancient times, similar devices were used in various tools and weapons. The evolution of the cotter reflects advancements in technology and materials, demonstrating how even the simplest components can have a rich history.Moreover, the maintenance of cotters is critical in ensuring the longevity of machinery. Regular inspections should be conducted to check for wear and tear. A worn-out cotter can lead to loosening connections, which might cause equipment malfunction. Therefore, understanding when to replace a cotter is vital for anyone responsible for machinery upkeep.In conclusion, the cotter may seem like a minor component in the vast world of engineering, but its role is undeniably significant. Whether in bicycles, automobiles, or other machinery, cotters ensure that parts remain securely connected, allowing for safe and efficient operation. As technology continues to advance, the design and materials used for cotters may evolve, but their fundamental purpose will remain unchanged. Recognizing the value of such components is essential for engineers, mechanics, and anyone interested in the intricacies of machinery and construction. By appreciating the importance of a cotter, we gain a deeper understanding of the interconnectedness of all parts within a system, ultimately leading to better design and maintenance practices in engineering fields.
在机械工程和建筑的世界中,每一个小部件都在确保结构和机器的整体功能性和安全性方面发挥着重要作用。其中一个重要的组件是cotter,它用于将两个或多个部分固定在一起。cotter通常是一个小型的锥形销或楔形物,适合插入槽或孔中,防止部件分开。理解cotter的功能和应用对于任何参与组装或维护机械的人来说都是至关重要的。cotter的设计可能会根据其特定用途而有所不同,但其主要目的保持不变:为组件之间提供可靠的连接。例如,在自行车的组装中,cotters常用于将曲柄臂固定在底部支架上。如果没有这些小而关键的部件,自行车将无法正常运转,安全性也会受到威胁。在汽车行业中,cotters的另一个常见应用可以找到。在车辆中,cotters用于将各种部件固定在一起,例如发动机中的连杆。cotter的失效可能导致灾难性的后果,包括发动机故障或事故,这突显了质量和正确安装的重要性。除了机械应用,cotters也具有历史意义。在古代,类似的装置被用于各种工具和武器。cotter的演变反映了技术和材料的进步,表明即使是最简单的组件也可以有丰富的历史。此外,cotters的维护对于确保机械的长期使用至关重要。应定期进行检查,以检查磨损情况。磨损的cotter可能导致连接松动,从而导致设备故障。因此,了解何时更换cotter对于任何负责机械保养的人都是至关重要的。总之,cotter在广阔的工程世界中可能看似一个微不足道的组件,但其角色无疑是重要的。无论是在自行车、汽车还是其他机械中,cotters确保部件保持牢固连接,从而允许安全高效的操作。随着技术的不断进步,用于cotters的设计和材料可能会演变,但其基本目的将保持不变。认识到这些组件的价值对于工程师、机械师以及任何对机械和建筑复杂性感兴趣的人来说都是必不可少的。通过欣赏cotter的重要性,我们对系统内所有部件的相互联系有了更深刻的理解,最终导致工程领域更好的设计和维护实践。