brush discharge

简明释义

1. 刷形放电; 2. 电晕放电;

英英释义

例句

1.After replacing the brushes, the brush discharge was significantly reduced, improving efficiency.

更换刷子后，刷子放电显著减少，提高了效率。

2.The engineer recommended using higher quality brushes to minimize brush discharge issues.

工程师建议使用更高质量的刷子，以最小化刷子放电问题。

3.During the test, we observed a noticeable brush discharge that affected the performance of the equipment.

在测试过程中，我们观察到明显的刷子放电，这影响了设备的性能。

4.The technician explained that the motor was failing due to brush discharge, which can cause significant wear on the brushes.

技术人员解释说，电动机因发生刷子放电而故障，这会导致刷子的严重磨损。

5.To prevent brush discharge, regular maintenance of the electric motor is essential.

为了防止刷子放电，定期维护电动机是必不可少的。

作文

In the realm of electrical engineering, understanding various phenomena is crucial for both theoretical knowledge and practical applications. One such phenomenon that often comes into play is known as brush discharge. This term refers to a specific type of electrical discharge that occurs when a charged object comes into contact with a conductive surface, leading to a sudden release of electricity. The mechanics behind brush discharge can be quite fascinating, especially when one considers its implications in everyday technology. To grasp the concept of brush discharge, it is essential to first understand what happens during this process. When two materials come into contact, electrons may transfer from one material to another, creating an imbalance of charge. If the charged object is sufficiently conductive, this can lead to a rapid discharge of electricity, often accompanied by a visible spark or audible sound. This phenomenon is not limited to high-voltage systems; it can also occur in low-voltage environments, such as in electronic devices. One common example of brush discharge can be observed in electric motors. In these devices, brushes made of conductive material are used to transfer electricity to the rotating parts of the motor. As the brushes make contact with the commutator, small discharges can occur, which are essentially brush discharge. While these discharges are typically small and manageable, they can lead to wear and tear on the brushes over time, necessitating regular maintenance. Moreover, brush discharge is not just a concern in motors; it can also pose challenges in various electrical systems. For instance, in high-voltage transmission lines, the presence of moisture or contaminants can increase the likelihood of brush discharge, leading to potential disruptions in service. Engineers must take these factors into account when designing systems to ensure reliability and safety. Interestingly, the study of brush discharge extends beyond just practical applications; it also has implications in the field of physics. Researchers examine the conditions under which brush discharge occurs to better understand the behavior of electric charges in different materials. This knowledge can contribute to advancements in materials science and improve the performance of electronic devices. In conclusion, brush discharge is a significant electrical phenomenon that plays a vital role in various technologies. From electric motors to high-voltage transmission lines, understanding brush discharge allows engineers and scientists to design more efficient and reliable systems. As technology continues to evolve, the importance of studying and mastering concepts like brush discharge will only grow, paving the way for innovations that enhance our daily lives. Ultimately, the world of electricity is filled with intricate interactions and phenomena that require careful study and consideration. By delving into the details of brush discharge, we not only gain insight into its immediate effects but also uncover broader implications that can advance our understanding of electrical systems as a whole.

在电气工程领域，理解各种现象对理论知识和实际应用至关重要。其中一个常见的现象被称为刷放电。这个术语指的是当带电物体与导电表面接触时发生的一种特定类型的电气放电，导致电力的突然释放。理解刷放电背后的机制非常有趣，尤其是当我们考虑到它在日常技术中的影响时。要掌握刷放电的概念，首先需要了解这一过程中的发生情况。当两种材料接触时，电子可能会从一种材料转移到另一种材料，从而产生电荷的不平衡。如果带电物体具有足够的导电性，这可能导致电力的快速放电，通常伴随着可见的火花或听到的声音。这种现象并不仅限于高压系统；它也可以发生在低压环境中，例如在电子设备中。一个常见的刷放电的例子可以在电动机中观察到。在这些设备中，使用导电材料制成的刷子用于将电力传输到电动机的旋转部件。当刷子与换向器接触时，可能会发生小的放电，这本质上就是刷放电。虽然这些放电通常很小且可控，但随着时间的推移，它们可能会导致刷子的磨损，因此需要定期维护。此外，刷放电不仅仅是在电动机中引起关注；它还可能在各种电气系统中带来挑战。例如，在高压输电线路中，存在的湿气或污染物可能增加刷放电的可能性，从而导致服务中断。工程师必须在设计系统时考虑这些因素，以确保可靠性和安全性。有趣的是，研究刷放电不仅限于实际应用；它在物理学领域也有其意义。研究人员考察刷放电发生的条件，以更好地理解不同材料中电荷的行为。这些知识可以促进材料科学的进步，并改善电子设备的性能。总之，刷放电是一个重要的电气现象，在各种技术中发挥着至关重要的作用。从电动机到高压输电线路，理解刷放电使工程师和科学家能够设计出更高效、更可靠的系统。随着技术的不断发展，研究和掌握像刷放电这样的概念的重要性只会增加，为提高我们日常生活的创新铺平道路。最终，电力的世界充满了复杂的相互作用和现象，需要认真研究和考虑。通过深入探讨刷放电的细节，我们不仅能获得其直接影响的洞察，还能揭示更广泛的影响，这些影响可以促进我们对整体电气系统的理解。