average tubing pressure

简明释义

1. 平均油压; 2. 平均油管压力;

英英释义

例句

1.The team adjusted the pump settings based on the average tubing pressure 平均管压 readings taken during the last shift.

团队根据上一个班次的平均管压 average tubing pressure读数调整了泵的设置。

2.Monitoring the average tubing pressure 平均管压 is crucial for ensuring the safety of the drilling operation.

监测平均管压 average tubing pressure对确保钻井作业的安全至关重要。

3.If the average tubing pressure 平均管压 drops below a certain level, it may indicate a leak in the system.

如果平均管压 average tubing pressure降到某个水平以下，可能表明系统存在泄漏。

4.Anomalies in the average tubing pressure 平均管压 can lead to costly downtime in production.

在平均管压 average tubing pressure中发现的异常可能导致生产中的高昂停机费用。

5.The engineer noted that the average tubing pressure 平均管压 in the well had increased significantly over the last month.

工程师注意到井中的平均管压 average tubing pressure在过去一个月显著增加。

作文

In the field of petroleum engineering, understanding the dynamics of fluid flow in wells is crucial for optimizing production. One of the key parameters that engineers monitor is the average tubing pressure. This term refers to the mean pressure exerted within the tubing of a well, which is essential for evaluating the performance of the well and ensuring efficient extraction of oil or gas. The average tubing pressure can provide insights into the health of the well, the efficiency of the pumping system, and the overall reservoir conditions. To better understand the significance of average tubing pressure, we must first consider how it is measured and calculated. Typically, this pressure is determined by taking readings from pressure gauges installed at various points along the tubing. These readings are then averaged over a specific time frame to obtain the average tubing pressure. This average value helps engineers identify trends and anomalies in well performance.Monitoring the average tubing pressure is vital for several reasons. Firstly, it aids in diagnosing potential problems within the well. For example, if the average tubing pressure suddenly drops, it may indicate issues such as leaks, blockages, or changes in reservoir pressure. Early detection of these problems allows for timely intervention, which can prevent costly downtime and enhance production efficiency.Secondly, maintaining an optimal average tubing pressure is critical for maximizing hydrocarbon recovery. If the pressure is too low, it may not be sufficient to push the fluids to the surface, resulting in reduced production rates. Conversely, excessively high pressures can lead to equipment failures and safety hazards. Therefore, engineers strive to keep the average tubing pressure within a specified range to ensure safe and efficient operations.Additionally, the average tubing pressure is closely linked to the overall reservoir management strategy. By analyzing pressure data over time, engineers can make informed decisions regarding enhanced oil recovery techniques, such as water flooding or gas injection. These methods rely on manipulating reservoir pressures to improve fluid flow and increase production. Understanding the average tubing pressure helps engineers assess the effectiveness of these techniques and adjust their strategies accordingly.In conclusion, the concept of average tubing pressure is fundamental in the realm of oil and gas extraction. It serves as a critical indicator of well performance and reservoir conditions. By diligently monitoring and analyzing this parameter, engineers can diagnose issues, optimize production, and implement effective reservoir management strategies. As the industry continues to evolve with new technologies and methodologies, the importance of accurately measuring and interpreting average tubing pressure will only grow, highlighting its role in driving efficiency and sustainability in petroleum engineering.

在石油工程领域，理解井中流体流动的动态对于优化生产至关重要。工程师们监测的关键参数之一是平均管道压力。这个术语指的是井中管道内施加的平均压力，这对于评估井的性能和确保高效提取石油或天然气至关重要。平均管道压力可以提供有关井的健康状况、抽油系统的效率以及整体储层条件的洞察。要更好地理解平均管道压力的重要性，我们首先必须考虑它是如何测量和计算的。通常，这种压力是通过在管道的各个点安装压力表来确定的。这些读数随后在特定时间范围内进行平均，以获得平均管道压力。这个平均值帮助工程师识别井性能中的趋势和异常。监测平均管道压力至关重要，原因有几个。首先，它有助于诊断井中的潜在问题。例如，如果平均管道压力突然下降，可能表明存在泄漏、堵塞或储层压力变化等问题。及早发现这些问题可以及时干预，从而防止昂贵的停机时间，提高生产效率。其次，维持最佳的平均管道压力对于最大化碳氢化合物的回收至关重要。如果压力过低，可能不足以将流体推送到地面，导致生产率降低。相反，过高的压力可能导致设备故障和安全隐患。因此，工程师努力将平均管道压力保持在规定范围内，以确保安全和高效的操作。此外，平均管道压力与整体储层管理策略密切相关。通过分析随时间变化的压力数据，工程师可以就增强石油回收技术（如水驱或气注）做出明智的决策。这些方法依赖于操控储层压力以改善流体流动并增加生产。理解平均管道压力有助于工程师评估这些技术的有效性，并相应调整他们的策略。总之，平均管道压力的概念在石油和天然气提取领域是基础性的。它作为井性能和储层条件的关键指标。通过认真监测和分析这一参数，工程师可以诊断问题、优化生产并实施有效的储层管理策略。随着行业继续通过新技术和方法演变，准确测量和解释平均管道压力的重要性只会增加，突显其在推动石油工程效率和可持续性方面的作用。