average filling losses

简明释义

1. 平均灌注损耗; 2. 平均装卸损耗; 3. 平均大呼吸损耗;

英英释义

例句

1.Management set a target to decrease the average filling losses 平均填充损失 by 10% this quarter.

管理层设定了目标，在本季度将<平均填充损失>减少10%。

2.The factory reported that the average filling losses 平均填充损失 during the production run were within acceptable limits.

工厂报告称，生产过程中<平均填充损失>在可接受的范围内。

3.The new machine is designed to minimize average filling losses 平均填充损失 during operation.

新机器旨在最小化操作过程中的<平均填充损失>。

4.To improve efficiency, we need to analyze the reasons behind the average filling losses 平均填充损失 in our packaging process.

为了提高效率，我们需要分析包装过程中<平均填充损失>的原因。

5.By reducing the average filling losses 平均填充损失, we can significantly increase our profit margins.

通过减少<平均填充损失>，我们可以显著提高利润率。

作文

In the world of manufacturing and production, efficiency is key to success. Companies strive to maximize their output while minimizing waste. One critical aspect of this efficiency is understanding and managing average filling losses, which refers to the amount of material lost during the filling process of containers, molds, or other holding structures. These losses can occur due to various factors such as spillage, evaporation, or even improper filling techniques. By analyzing these losses, businesses can identify areas for improvement and implement strategies to reduce waste, ultimately leading to increased profitability.For instance, in the beverage industry, when filling bottles with liquid, average filling losses can significantly impact production costs. If a factory fills 10,000 bottles but loses an average of 2% of the liquid during the process, that equates to 200 liters of product wasted. This not only represents a loss of materials but also affects the overall efficiency of the production line. Therefore, companies often conduct thorough analyses to determine the causes of these losses and take corrective actions.One common approach to reducing average filling losses is to invest in better equipment. Modern filling machines are designed to minimize spillage and ensure precise measurements, which can drastically cut down on the amount of product lost during filling. Additionally, training employees on best practices for operating these machines can further enhance efficiency. Understanding how to properly fill containers without causing spills or overflows can contribute to lower average filling losses.Another effective strategy is to monitor and adjust the filling process continuously. Implementing real-time data tracking systems allows manufacturers to observe filling rates, detect anomalies, and make immediate adjustments to minimize losses. For example, if a spike in average filling losses is detected, operators can quickly investigate the cause—whether it’s a malfunctioning machine or an issue with the filling technique—and address it before it leads to significant waste.Moreover, conducting regular audits of the filling process can help identify patterns in average filling losses. By analyzing historical data, manufacturers can pinpoint specific times or conditions under which losses are higher. This information can be invaluable for making informed decisions about process improvements or changes in operational procedures.In conclusion, understanding and managing average filling losses is essential for any production-oriented business. By focusing on reducing these losses, companies can improve their overall efficiency, decrease costs, and enhance their bottom line. As industries continue to evolve and embrace new technologies, the ability to minimize waste through effective management of filling processes will remain a crucial factor in achieving sustainable growth and success. Ultimately, every effort made to reduce average filling losses contributes to a more efficient and environmentally friendly production system, benefiting both the company and the planet.

在制造和生产的世界中，效率是成功的关键。公司努力最大化产出，同时最小化浪费。理解和管理平均填充损失是这一效率的重要方面，它指的是在容器、模具或其他保持结构的填充过程中损失的材料量。这些损失可能由于各种因素而发生，例如溢出、蒸发甚至不当的填充技术。通过分析这些损失，企业可以识别改进领域，并实施策略以减少浪费，最终提高盈利能力。例如，在饮料行业，当将液体填充到瓶子中时，平均填充损失可能会显著影响生产成本。如果一家工厂填充了10,000瓶，但在过程中平均损失了2%的液体，那么这就相当于浪费了200升产品。这不仅代表了材料的损失，还影响了生产线的整体效率。因此，公司通常会进行彻底的分析，以确定这些损失的原因并采取纠正措施。减少平均填充损失的一种常见方法是投资更好的设备。现代填充机设计旨在最小化溢出并确保精确测量，这可以大幅减少填充过程中损失的产品数量。此外，培训员工掌握操作这些机器的最佳实践也可以进一步提高效率。了解如何正确填充容器而不造成溢出或溢流，有助于降低平均填充损失。另一种有效的策略是持续监测和调整填充过程。实施实时数据跟踪系统使制造商能够观察填充率、检测异常并立即调整以最小化损失。例如，如果检测到平均填充损失的激增，操作人员可以迅速调查原因——无论是机器故障还是填充技术的问题——并在导致重大浪费之前解决它。此外，定期审计填充过程可以帮助识别平均填充损失的模式。通过分析历史数据，制造商可以找出特定时间或条件下损失较高的信息。这些信息对做出关于过程改进或运营程序变更的明智决策至关重要。总之，理解和管理平均填充损失对于任何以生产为导向的企业都是必不可少的。通过专注于减少这些损失，公司可以改善整体效率、降低成本并增强其利润。随着各行业不断发展并采用新技术，最小化通过有效管理填充过程的浪费的能力仍将是实现可持续增长和成功的关键因素。最终，减少平均填充损失所做的每一项努力都有助于建立一个更高效和环保的生产系统，造福公司和地球。