acetylene cylinder

简明释义

1. 乙炔瓶; 2. 乙炔气瓶;

英英释义

例句

1.The welder carefully checked the pressure of the acetylene cylinder before starting the job.

焊工在开始工作之前仔细检查了乙炔气瓶的压力。

2.Always store the acetylene cylinder in an upright position to prevent leaks.

始终将乙炔气瓶竖直存放，以防止泄漏。

3.The technician replaced the empty acetylene cylinder with a full one.

技术员用一个满的乙炔气瓶替换了空的。

4.During the training session, we learned how to safely handle an acetylene cylinder.

在培训课程中，我们学习了如何安全地处理乙炔气瓶。

5.Make sure the acetylene cylinder is secured before transporting it to the site.

在将乙炔气瓶运输到现场之前，请确保其固定好。

作文

Acetylene is a colorless gas that is widely used in various industrial applications, particularly in welding and cutting metals. One of the most common ways to store and transport acetylene is in an acetylene cylinder, which is designed to safely contain this highly flammable gas under pressure. An acetylene cylinder is typically made of high-strength steel and is equipped with a special valve to control the release of the gas. Due to its explosive nature when mixed with air, proper handling and storage of an acetylene cylinder are critical to ensuring safety in any workplace.The importance of acetylene cylinders cannot be overstated, especially in industries such as construction, automotive repair, and metal fabrication. In welding, for example, acetylene is often combined with oxygen to produce a flame that can reach temperatures exceeding 3,000 degrees Celsius. This intense heat allows welders to join metals together effectively. Without the use of an acetylene cylinder, it would be nearly impossible to achieve the necessary temperatures for many welding processes.However, the use of acetylene cylinders also comes with significant risks. The gas itself is highly combustible, and if not handled correctly, it can lead to dangerous explosions or fires. Therefore, it is essential for workers to be trained in the proper procedures for using and storing these cylinders. For instance, an acetylene cylinder must always be stored upright and secured to prevent it from falling over. Additionally, it should be kept away from heat sources and other flammable materials.Regular inspections of acetylene cylinders are also crucial. These inspections help ensure that there are no leaks or damages that could compromise the integrity of the cylinder. Workers should check for signs of rust, dents, or any other physical damage before using an acetylene cylinder. If a cylinder is found to be defective, it should be taken out of service immediately and reported to a supervisor.In addition to safety measures, regulations regarding the transportation of acetylene cylinders are in place to minimize risks. For instance, when transporting these cylinders, they must be secured in a vehicle to prevent movement during transit. Furthermore, it is advisable to transport acetylene cylinders in a well-ventilated area to avoid the accumulation of gas in case of a leak.In conclusion, while acetylene cylinders play a vital role in many industrial applications, their use requires strict adherence to safety protocols and regulations. Understanding the nature of acetylene gas and the proper handling of acetylene cylinders can significantly reduce the risk of accidents. As industries continue to rely on this powerful gas for various applications, ongoing education and training in safety practices will remain essential for all workers involved in its use.

乙炔是一种无色气体，广泛用于各种工业应用，特别是在焊接和切割金属方面。存储和运输乙炔的最常见方式之一是使用乙炔气瓶，它旨在安全地在压力下容纳这种高度易燃的气体。乙炔气瓶通常由高强度钢制成，并配有特殊阀门以控制气体的释放。由于其与空气混合时具有爆炸性，因此正确处理和存储乙炔气瓶对于确保任何工作场所的安全至关重要。乙炔气瓶的重要性不容小觑，尤其是在建筑、汽车维修和金属加工等行业中。例如，在焊接中，乙炔通常与氧气结合，产生的火焰温度可以超过3000摄氏度。这种强烈的热量使焊工能够有效地将金属连接在一起。如果没有使用乙炔气瓶，许多焊接过程所需的温度几乎是不可能达到的。然而，使用乙炔气瓶也带来了重大风险。气体本身高度可燃，如果处理不当，可能导致危险的爆炸或火灾。因此，工人必须接受正确使用和存储这些气瓶的程序培训。例如，乙炔气瓶必须始终直立存放并固定，以防止其倒下。此外，它应远离热源和其他易燃材料。定期检查乙炔气瓶也至关重要。这些检查有助于确保没有泄漏或损坏会影响气瓶的完整性。工人在使用乙炔气瓶之前应检查生锈、凹陷或任何其他物理损坏的迹象。如果发现气瓶有缺陷，应立即停止使用并报告给主管。除了安全措施外，还有关于乙炔气瓶运输的规定，以最大限度地减少风险。例如，在运输这些气瓶时，必须在车辆中固定以防止在运输过程中移动。此外，建议在通风良好的区域运输乙炔气瓶，以避免在发生泄漏时气体的积聚。总之，虽然乙炔气瓶在许多工业应用中发挥着至关重要的作用，但其使用需要严格遵守安全协议和规定。理解乙炔气体的性质以及如何正确处理乙炔气瓶可以显著降低事故风险。随着各行业继续依赖这种强大的气体进行各种应用，持续的教育和安全实践培训将对所有参与其使用的工人至关重要。