mil

简明释义

英[mɪl]美[mɪl]

n. 密耳（千分之一英寸）；密位（六千四百分之一周角）；千分之一磅；（俚）一百万美元；（Mil）（俄、塞）米尔（人名）

abbr. （军事、军用）域名（military）

英英释义

单词用法

同义词

反义词

例句

1.The radio\'s Mil-Spec metal housing is submersible to two meters.

该无线电的军标金属外壳可以使其潜入水下两米仍然正常工作。

2.His mil-dot reticle will only be accurate at one power, usually the highest.

他的米尔小点调制盘只将是准确的在一力量，通常最高。

3.This paper introduces its compatibility and integration with MIL-STD-1553 in detail.

本文具体介绍了光纤通道对MIL-STD - 1553的兼容与系统综合。

4.Our products not only meet the GB, GJB but also the IEC and MIL or related standard.

产品不仅满足GB、GJB等相关国标、军标要求，而且也适用iec和MIL等有关标准。

5.PWB samples were subjected to the solder float test per MIL-P-55110 and then the PTHs were cross-sectioned.

印制板试样必须经过MIL—P—55110标准浮焊试验，然后对金属化孔进行剖视。

6.With the nose set, I come out of MIL power and slow down.

在拉好机头仰角的同时，我把油门退出军用推力开始减速。

7.I'm in MIL power initially, but then I back out to continue to slow the jet down.

一开始的时候我的油门是在军用推力状态下，但接下来我就要把它退出来使飞机减速。

8.The fabric is measured at 10 mil in thickness.

这块布料的厚度为10密耳。

9.The contractor specified a coating of 5 mil for the surface.

承包商规定表面涂层厚度为5密耳。

10.This protective film is only 1 mil thick.

这个保护膜只有1密耳厚。

11.A standard plastic bag is usually around 2 mil thick.

标准塑料袋的厚度通常约为2密耳。

12.The label on the box indicates that it should be stored at 50 mil from the heat source.

箱子上的标签指示应距离热源50密耳存放。

作文

In the world of measurements, the term mil is often used to denote a thousandth of an inch. This unit is particularly popular in industries such as manufacturing and engineering, where precision is paramount. Understanding the significance of mil can greatly enhance one’s ability to communicate effectively in technical fields. For instance, when discussing the thickness of materials like plastic or metal, professionals often refer to their measurements in mils. A plastic sheet that is 10 mil thick is equivalent to 0.01 inches, which may seem trivial but can make a significant difference in applications requiring specific tolerances.The use of mil extends beyond just thickness; it also appears in various contexts such as coatings and films. For example, a paint job might specify that the coating should be applied at a thickness of 2 mils to ensure durability and coverage. This level of detail is crucial for achieving the desired outcome, especially in sectors like automotive or aerospace, where even minor deviations can lead to failures.Moreover, the concept of mil is not only confined to the imperial system. In metric terms, a mil is roughly equivalent to 25.4 micrometers (µm). This conversion is essential for international collaboration, as different countries may prefer different measurement systems. Engineers and manufacturers must often convert between mils and micrometers to ensure compatibility and accuracy in their projects.When it comes to everyday applications, understanding mil can also benefit consumers. For example, when purchasing plastic bags, you might see the thickness advertised in mils. A thicker bag, say 3 mils, will generally be more durable than a 1 mil bag, providing better protection for its contents. Therefore, being aware of these measurements can help consumers make informed decisions based on their needs.Additionally, mil is sometimes confused with other similar-sounding terms, such as 'millimeter' or 'mile.' It is important to clarify that while a millimeter is a metric unit of length equal to one-thousandth of a meter, a mil specifically refers to a thousandth of an inch. This distinction is crucial, especially in fields that rely heavily on precise measurements.In conclusion, the term mil plays a vital role in various industries and everyday life. Whether it’s about the thickness of materials, coatings, or packaging, understanding mil allows for better communication and decision-making. As we continue to advance in technology and manufacturing, the importance of precise measurements like mil will only grow, emphasizing the need for professionals and consumers alike to familiarize themselves with this unit. Ultimately, knowledge of mil empowers individuals to engage more effectively in discussions surrounding materials and engineering, leading to improved outcomes in both professional and personal projects.

在测量的世界中，术语mil通常用于表示一英寸的千分之一。这个单位在制造和工程等行业中尤为流行，因为精确性至关重要。理解mil的重要性可以极大地增强一个人在技术领域有效沟通的能力。例如，在讨论塑料或金属等材料的厚度时，专业人士通常以mil为单位来引用他们的测量结果。一块厚度为10mil的塑料板相当于0.01英寸，这看起来微不足道，但在需要特定公差的应用中可能会产生重大影响。mil的使用不仅限于厚度；它还出现在涂层和薄膜等各种上下文中。例如，油漆工作可能会指定涂层应以2mil的厚度施加，以确保耐用性和覆盖率。这种细节对于实现所需的结果至关重要，特别是在汽车或航空航天等行业中，哪怕是微小的偏差也可能导致故障。此外，mil的概念并不仅仅局限于英制系统。在公制单位中，1mil大约等于25.4微米（µm）。这种换算对于国际合作至关重要，因为不同国家可能更喜欢不同的测量系统。工程师和制造商必须经常在mil和微米之间进行转换，以确保项目的兼容性和准确性。在日常应用中，理解mil也可以使消费者受益。例如，当购买塑料袋时，您可能会看到厚度以mil为单位进行宣传。较厚的袋子，比如3mil，一般比1mil的袋子更耐用，可以更好地保护其内容物。因此，了解这些测量标准可以帮助消费者根据自己的需求做出明智的决策。此外，mil有时与其他类似的术语混淆，例如“毫米”或“英里”。澄清这一点很重要，因为虽然毫米是等于一千分之一米的公制长度单位，但mil特指一英寸的千分之一。这一区别至关重要，尤其是在高度依赖精确测量的领域。总之，术语mil在各个行业和日常生活中发挥着重要作用。无论是关于材料、涂层还是包装的厚度，理解mil都能使沟通和决策更加有效。随着我们在技术和制造方面的不断进步，像mil这样的精确测量的重要性只会增加，强调专业人士和消费者熟悉这一单位的必要性。最终，了解mil使个人能够更有效地参与围绕材料和工程的讨论，从而改善专业和个人项目的结果。