waterline belt

简明释义

水线

英英释义

例句

1.During inspections, technicians often check the waterline belt for signs of wear and tear.

在检查过程中，技术人员通常会检查水线带是否有磨损的迹象。

2.Before painting, make sure to clean the waterline belt to ensure proper adhesion.

在上漆之前，确保清洁水线带以确保良好的附着力。

3.The waterline belt of the vessel indicates the maximum load it can carry safely.

船只的水线带指示了其安全载荷的最大值。

4.The ship's waterline belt is crucial for determining its stability in rough seas.

船只的水线带对于确定其在恶劣海况下的稳定性至关重要。

5.The waterline belt helps in assessing how much cargo can be loaded without compromising safety.

通过水线带可以评估可以装载多少货物而不危及安全。

作文

In the world of maritime engineering and shipbuilding, various terminologies are used to describe different parts and features of a vessel. One such term that may not be familiar to everyone is the waterline belt. The waterline belt refers to the area of a ship's hull that is submerged when the vessel is at its designed waterline. This part of the hull is crucial for understanding the stability, buoyancy, and overall performance of the ship. The significance of the waterline belt cannot be overstated. It plays a vital role in determining how a ship interacts with water, which directly affects its speed and fuel efficiency. A well-designed waterline belt ensures that the ship can cut through the water smoothly, minimizing resistance and allowing for better maneuverability. This aspect is particularly important for commercial vessels that travel long distances, as even slight improvements in efficiency can lead to substantial cost savings over time.Furthermore, the waterline belt is essential for the safety of the vessel. During the design phase, engineers must calculate the optimal height and shape of the waterline belt to ensure that the ship remains stable under various conditions. If the waterline belt is not properly designed, the ship could become unstable, leading to dangerous situations such as capsizing or excessive rolling. Thus, naval architects pay close attention to the dimensions and contours of the waterline belt during the construction process.In addition to stability and performance, the waterline belt also affects the aesthetic appeal of a ship. Many modern vessels are designed with sleek lines and elegant shapes, and the waterline belt contributes significantly to this visual impression. A well-proportioned waterline belt can enhance the overall beauty of the ship, making it more attractive to potential buyers and operators.Moreover, the waterline belt is subject to various environmental factors, including waves, currents, and weather conditions. Ships must be built to withstand these forces while maintaining their structural integrity. Engineers and designers often incorporate materials and technologies that enhance the durability of the waterline belt, ensuring that it can endure the harsh conditions of the sea.In conclusion, the waterline belt is a critical component of ship design and operation. Its influence on a vessel's performance, safety, and aesthetics makes it an area of focus for engineers and designers alike. Understanding the importance of the waterline belt allows for better shipbuilding practices and ultimately leads to more efficient and safer maritime transportation. As we continue to advance in shipbuilding technology, the waterline belt will remain a fundamental element in the quest for improved vessel performance and sustainability on the seas.

在海事工程和造船的世界中，使用各种术语来描述船舶的不同部分和特征。其中一个可能并不为所有人所熟知的术语是水线带。水线带指的是船体在设计水线上沉没时的区域。这个船体部分对于理解船舶的稳定性、浮力和整体性能至关重要。水线带的重要性不容小觑。它在确定船舶与水的相互作用方面起着关键作用，这直接影响到船舶的速度和燃料效率。设计良好的水线带确保船舶能够平稳地切入水中，最小化阻力，从而提高操控性。这一点对于长途航行的商业船舶尤为重要，因为即使是微小的效率提升，也能在长时间内带来可观的成本节约。此外，水线带对船舶的安全性也至关重要。在设计阶段，工程师必须计算出最佳的水线带高度和形状，以确保船舶在各种条件下保持稳定。如果水线带设计不当，船舶可能会变得不稳定，导致如翻覆或过度摇摆等危险情况。因此，船舶建筑师在建造过程中会密切关注水线带的尺寸和轮廓。除了稳定性和性能，水线带还影响船舶的美观性。许多现代船舶设计具有流线型和优雅的形状，而水线带在这种视觉印象中起着重要作用。比例协调的水线带可以增强船舶的整体美感，使其对潜在买家和运营者更具吸引力。此外，水线带还受到波浪、潮流和天气条件等各种环境因素的影响。船舶必须建造得足够坚固，以承受这些力量，同时保持其结构完整性。工程师和设计师通常会采用增强水线带耐久性的材料和技术，以确保其能够经受住海洋的恶劣条件。总之，水线带是船舶设计和操作的关键组成部分。它对船舶性能、安全性和美观性的影响使其成为工程师和设计师关注的焦点。理解水线带的重要性可以促进更好的造船实践，最终导致更高效、更安全的海洋运输。随着我们在造船技术上的持续进步，水线带将始终是提升船舶性能和海洋可持续性追求中的基本元素。