subdivision loadline

简明释义

分舱载重线

英英释义

例句

1.Adjustments were made to the design after reviewing the subdivision loadline calculations.

在审查分区荷载线计算后，对设计进行了调整。

2.Before construction began, we had to verify the subdivision loadline for safety compliance.

在施工开始之前，我们必须验证分区荷载线以确保安全合规。

3.The contractor was informed about the importance of adhering to the subdivision loadline during the building process.

承包商被告知在建筑过程中遵守分区荷载线的重要性。

4.The architect referenced the subdivision loadline in the blueprints to avoid overloading the beams.

建筑师在蓝图中参考了分区荷载线以避免超载梁。

5.The engineer calculated the subdivision loadline to ensure the structure could support the weight of additional floors.

工程师计算了分区荷载线以确保结构能够支撑额外楼层的重量。

作文

In the field of engineering and design, particularly in shipbuilding and structural engineering, understanding the concept of subdivision loadline is crucial for ensuring safety and compliance with regulations. The term subdivision loadline refers to a specific marking on a vessel's hull that indicates the maximum load it can safely carry in various water conditions. This marking is essential for determining the vessel's stability and buoyancy, especially when it is loaded with cargo or passengers.The subdivision loadline is determined based on several factors, including the ship's design, size, and intended use. It helps to ensure that the vessel can withstand different sea states without risking capsizing or taking on water. For instance, a ship designed for rough seas will have a different subdivision loadline than one meant for calm waters. This distinction is vital for maritime safety, as it helps prevent accidents that could arise from overloading a vessel beyond its safe capacity.Moreover, the subdivision loadline is not just a regulatory requirement; it also serves as a guideline for ship operators. By adhering to the indicated loadline, operators can manage their cargo more effectively, ensuring that they do not exceed the vessel's limits. This practice not only enhances safety but also improves operational efficiency, as vessels can optimize their loads without compromising stability.In addition to its importance in maritime operations, the concept of subdivision loadline can also be applied to other fields, such as civil engineering. In this context, the principle behind the subdivision loadline can be related to load-bearing structures, where engineers must calculate the maximum loads that buildings and bridges can support. Understanding how to properly assess and mark these limits is essential for preventing structural failures and ensuring public safety.Furthermore, the subdivision loadline is often associated with international shipping regulations, such as those set forth by the International Maritime Organization (IMO). These regulations provide a framework for determining the appropriate loadlines for different types of vessels, ensuring a standardized approach to maritime safety worldwide. Compliance with these regulations is not only a legal obligation but also a moral responsibility for shipowners and operators.In conclusion, the subdivision loadline is a fundamental concept in both maritime and civil engineering that plays a critical role in safety and operational efficiency. Understanding its implications helps engineers and operators make informed decisions regarding load management and structural integrity. As we continue to advance in engineering practices, the principles surrounding the subdivision loadline will remain pivotal in safeguarding lives and property at sea and on land.

在工程和设计领域，特别是在造船和结构工程中，理解分段载重线的概念对于确保安全和遵守规定至关重要。术语分段载重线指的是船体上的特定标记，表示它在各种水域条件下可以安全承载的最大负荷。这个标记对于确定船只的稳定性和浮力尤其重要，特别是在装载货物或乘客时。分段载重线的确定基于多个因素，包括船只的设计、大小和预期用途。它有助于确保船只能够承受不同的海况，而不会面临倾覆或进水的风险。例如，设计用于恶劣海域的船只，其分段载重线将与用于平静水域的船只不同。这种区别对于海事安全至关重要，因为它有助于防止因超载而导致的事故。此外，分段载重线不仅是法规要求，它还为船舶运营商提供了指导。通过遵循所示的载重线，运营商可以更有效地管理他们的货物，确保不超过船只的限制。这种做法不仅增强了安全性，还提高了运营效率，因为船只可以在不妥协稳定性的情况下优化其载重。除了在海事操作中的重要性外，分段载重线的概念也可以应用于其他领域，如土木工程。在这种情况下，分段载重线背后的原理可以与承载结构相关联，工程师必须计算建筑物和桥梁可以支持的最大负荷。理解如何正确评估和标记这些限制对于防止结构失败和确保公众安全至关重要。此外，分段载重线通常与国际航运法规相关，例如国际海事组织（IMO）制定的法规。这些法规为不同类型船只确定适当的载重线提供了框架，确保全球海事安全的标准化方法。遵守这些法规不仅是法律义务，也是船东和运营商的道德责任。总之，分段载重线是海事和土木工程中的基本概念，在安全和运营效率方面发挥着关键作用。理解其影响有助于工程师和运营商就载荷管理和结构完整性做出明智的决策。随着我们在工程实践中的不断进步，围绕分段载重线的原则将在保护海上和陆地生命及财产方面继续发挥重要作用。