sump type fuel tank

简明释义

沉淀式燃油舱

英英释义

例句

1.The design of the sump type fuel tank 油池式燃油箱 allows for easy drainage of sediment.

这种sump type fuel tank 油池式燃油箱 的设计便于沉淀物的排放。

2.During the inspection, the technician found that the sump type fuel tank 油池式燃油箱 was contaminated with water.

在检查过程中，技术人员发现sump type fuel tank 油池式燃油箱 被水污染了。

3.The aircraft was grounded due to a leak in the sump type fuel tank 油池式燃油箱 that needed immediate repair.

由于需要立即修理的sump type fuel tank 油池式燃油箱 漏油，飞机被停飞。

4.It is essential to regularly clean the sump type fuel tank 油池式燃油箱 to prevent fuel contamination.

定期清洁sump type fuel tank 油池式燃油箱 是防止燃料污染的关键。

5.Our new generator uses a sump type fuel tank 油池式燃油箱 for better fuel efficiency.

我们的新发电机使用sump type fuel tank 油池式燃油箱 以提高燃油效率。

作文

In the world of engineering and fuel management, understanding the components that make up fuel systems is crucial. One such component is the sump type fuel tank, which plays an essential role in various applications, particularly in aviation and automotive industries. A sump type fuel tank (油池型燃料箱) is designed to collect and store fuel at a low point, allowing for efficient fuel retrieval and minimizing the risk of contaminants entering the fuel system.The primary function of a sump type fuel tank is to ensure that fuel can be drawn from the bottom of the tank, where it is most concentrated. This design is particularly advantageous because it allows for the separation of water and sediment that may accumulate in the tank over time. In any fuel storage system, the presence of water and other impurities can lead to significant operational issues, including engine failure or reduced efficiency. By utilizing a sump type fuel tank (油池型燃料箱), these contaminants can be effectively managed, as they settle at the bottom and do not interfere with the fuel being pumped out.Moreover, the sump type fuel tank is often equipped with various features to enhance its functionality. For instance, many tanks come with a drain valve that enables operators to remove accumulated water and sediments easily. This maintenance procedure is vital to ensuring the longevity and reliability of the fuel system. Additionally, some sump type fuel tanks are designed with built-in filtration systems that further purify the fuel before it reaches the engine.In aviation, the use of sump type fuel tanks is particularly critical. Aircraft fuel systems must adhere to stringent safety standards, as even minor contamination can lead to catastrophic failures. Therefore, the integration of a sump type fuel tank (油池型燃料箱) in aircraft design helps maintain the integrity of the fuel supply, ensuring that pilots can operate their aircraft safely and efficiently.Furthermore, the application of sump type fuel tanks is not limited to aviation; they are also used in marine and automotive applications. In boats, for example, a sump type fuel tank can help prevent water from entering the fuel system, which is particularly important given the marine environment's potential for water contamination. Similarly, in automobiles, these tanks can improve fuel delivery and performance, especially in vehicles designed for off-road conditions where fuel may slosh around more than in standard vehicles.In conclusion, the sump type fuel tank (油池型燃料箱) is a vital component in various fuel management systems. Its design allows for effective separation of contaminants, ensuring that only clean fuel reaches the engine. Whether in aviation, marine, or automotive applications, the importance of maintaining fuel quality cannot be overstated. As technology continues to advance, the design and functionality of sump type fuel tanks will likely evolve, further enhancing their effectiveness in ensuring safe and efficient operation across multiple industries.

在工程和燃料管理的世界中，理解构成燃料系统的组件至关重要。一个这样的组件是油池型燃料箱，它在航空和汽车工业等各种应用中发挥着重要作用。油池型燃料箱（sump type fuel tank）旨在在低点收集和存储燃料，允许高效提取燃料，并最小化污染物进入燃料系统的风险。油池型燃料箱的主要功能是确保燃料可以从箱底抽取，这里是燃料浓度最高的地方。这种设计特别有利，因为它允许分离随着时间的推移可能在箱内积聚的水和沉淀物。在任何燃料存储系统中，水和其他杂质的存在可能导致重大操作问题，包括发动机故障或效率降低。通过使用油池型燃料箱（sump type fuel tank），这些污染物可以有效管理，因为它们沉积在底部，不会干扰被抽出的燃料。此外，油池型燃料箱通常配备各种功能以增强其功能性。例如，许多油箱配有排水阀，使操作人员能够轻松去除积聚的水和沉淀物。这一维护程序对确保燃料系统的寿命和可靠性至关重要。此外，一些油池型燃料箱的设计中还内置了过滤系统，进一步净化燃料，确保其在到达发动机之前处于最佳状态。在航空领域，油池型燃料箱的使用尤为关键。飞机燃料系统必须遵循严格的安全标准，因为即使是微小的污染也可能导致灾难性的故障。因此，在飞机设计中整合油池型燃料箱（sump type fuel tank）有助于维持燃料供应的完整性，确保飞行员能够安全高效地操作他们的飞机。此外，油池型燃料箱的应用并不限于航空；它们还用于海洋和汽车应用中。例如，在船只中，油池型燃料箱可以防止水进入燃料系统，这在海洋环境中尤其重要，因为水污染的潜力很大。同样，在汽车中，这些油箱可以改善燃料输送和性能，特别是在为越野条件设计的车辆中，燃料可能比标准车辆更容易晃动。总之，油池型燃料箱（sump type fuel tank）是各种燃料管理系统中的重要组成部分。它的设计允许有效分离污染物，确保只有清洁的燃料到达发动机。无论是在航空、海洋还是汽车应用中，维护燃料质量的重要性都不容小觑。随着技术的不断进步，油池型燃料箱的设计和功能将可能不断演变，进一步提高其在确保多个行业安全高效运行方面的有效性。