trip relay

简明释义

脱扣继电器

英英释义

例句

1.To prevent equipment damage, it's crucial to install a reliable trip relay 跳闸继电器 in the electrical system.

为了防止设备损坏，在电气系统中安装可靠的 trip relay 跳闸继电器 是至关重要的。

2.During the safety drill, we tested the trip relay 跳闸继电器 to ensure it responds correctly under overload conditions.

在安全演习中，我们测试了 trip relay 跳闸继电器 以确保它在过载条件下正确响应。

3.The control panel indicated that the trip relay 跳闸继电器 had been triggered due to an unexpected surge.

控制面板显示 trip relay 跳闸继电器 已因意外浪涌而触发。

4.The technician explained that if the voltage exceeds the limit, the trip relay 跳闸继电器 will activate to protect the circuit.

技术人员解释说，如果电压超过限制，trip relay 跳闸继电器 将激活以保护电路。

5.In our power distribution system, the trip relay 跳闸继电器 ensures that any fault will disconnect the affected section immediately.

在我们的电力分配系统中，trip relay 跳闸继电器 确保任何故障都会立即断开受影响的部分。

作文

In the world of electrical engineering, safety is of paramount importance. One of the critical components that ensure safety is the circuit breaker. Among various types of circuit breakers, the concept of a trip relay (跳闸继电器) plays a significant role in protecting electrical circuits from overloads and short circuits. A trip relay is essentially a device that detects faults in an electrical system and triggers the circuit breaker to disconnect power, thereby preventing potential damage to equipment or hazards such as fires.The operation of a trip relay can be understood through its basic components. Typically, it consists of a sensing mechanism, a relay coil, and an actuator. The sensing mechanism continuously monitors the current flowing through the circuit. When it detects an anomaly—such as excessive current due to a short circuit—the relay coil is energized. This energizing action causes the actuator to move, which in turn trips the circuit breaker, interrupting the flow of electricity.Understanding how a trip relay functions is crucial for engineers and technicians who work with electrical systems. They must be able to identify the signs of potential failure and ensure that the trip relay is functioning correctly. Regular maintenance checks are essential to verify that the relay responds appropriately to fault conditions. If a trip relay fails to operate when needed, it can lead to catastrophic failures, resulting in equipment damage or even personal injury.Moreover, the use of trip relays extends beyond just residential or commercial buildings. In industrial settings, where large machines operate, the risk of electrical faults increases significantly. Here, trip relays are integrated into control panels to provide an additional layer of safety. These relays can be programmed to respond to specific conditions, allowing for tailored protection based on the unique needs of the machinery.In recent years, advancements in technology have led to the development of smart trip relays. These modern devices not only detect faults but also communicate with other systems to provide real-time data on the electrical network's health. This capability allows for predictive maintenance, where potential issues can be identified before they become critical. As industries move towards automation and smart technology, the role of trip relays will continue to evolve, enhancing safety and efficiency.In conclusion, the trip relay (跳闸继电器) is an essential component in electrical safety systems. Its ability to detect faults and initiate disconnection of power is vital in preventing accidents and equipment damage. As technology progresses, understanding and utilizing trip relays will become increasingly important for engineers and technicians alike. Ensuring that these devices are properly maintained and functioning effectively is crucial for the safety and reliability of electrical systems in all environments.

在电气工程的世界中，安全至关重要。确保安全的关键组件之一是断路器。在各种类型的断路器中，trip relay（跳闸继电器）的概念在保护电路免受过载和短路方面发挥着重要作用。trip relay 本质上是一个检测电气系统故障并触发断路器断开电源的设备，从而防止对设备造成潜在损害或火灾等危险。理解 trip relay 的操作可以通过其基本组件来理解。通常，它由一个传感机制、一个继电器线圈和一个执行器组成。传感机制持续监测流经电路的电流。当它检测到异常情况——例如由于短路导致的过高电流时，继电器线圈被激活。这一激活动作导致执行器移动，从而触发断路器，切断电流的流动。理解 trip relay 的功能对从事电气系统工作的工程师和技术人员至关重要。他们必须能够识别潜在故障的迹象，并确保 trip relay 正常运作。定期维护检查对于验证继电器是否在故障条件下做出适当反应至关重要。如果 trip relay 在需要时未能操作，可能会导致灾难性的故障，导致设备损坏甚至人身伤害。此外，trip relays 的使用不仅限于住宅或商业建筑。在工业环境中，大型机器的运行使得电气故障的风险显著增加。在这里，trip relays 被集成到控制面板中，以提供额外的安全层。这些继电器可以被编程以响应特定条件，从而根据机器的独特需求提供量身定制的保护。近年来，技术的进步导致了智能 trip relays 的发展。这些现代设备不仅可以检测故障，还可以与其他系统通信，提供有关电气网络健康状况的实时数据。这种能力允许预测性维护，在潜在问题变得关键之前识别出来。随着工业向自动化和智能技术的发展，trip relays 的作用将继续演变，提高安全性和效率。总之，trip relay（跳闸继电器）是电气安全系统中的一个基本组件。它检测故障并启动断电的能力对于防止事故和设备损坏至关重要。随着技术的进步，理解和利用 trip relays 对于工程师和技术人员来说将变得越来越重要。确保这些设备得到妥善维护并有效运行对于所有环境中电气系统的安全性和可靠性至关重要。