tank vent

简明释义

舱通风孔

英英释义

例句

1.During refueling, it's important to monitor the tank vent for any signs of blockage.

在加油时，监控油箱通风口是否有任何堵塞迹象是很重要的。

2.A malfunctioning tank vent can lead to pressure buildup and potential leaks.

油箱通风口故障可能导致压力积聚和潜在泄漏。

3.The technician inspected the tank vent to ensure it was functioning properly.

技术人员检查了油箱通风口以确保其正常运作。

4.The design of the tank vent allows for safe release of vapors.

油箱通风口的设计允许安全释放蒸汽。

5.Always check the tank vent before starting the engine to prevent issues.

在启动发动机之前，请始终检查油箱通风口以防止出现问题。

作文

In the world of engineering and fluid dynamics, understanding the various components that contribute to the functionality of tanks is essential. One such component is the tank vent, which plays a critical role in maintaining the integrity of storage tanks. A tank vent is designed to allow air to enter and exit the tank as liquid levels change, preventing the buildup of pressure or vacuum that could potentially lead to structural failure or leaks. This is particularly important in industries such as oil and gas, chemicals, and water treatment, where the contents of the tanks can be hazardous or valuable.When a tank is filled with liquid, the volume of air inside decreases, creating a negative pressure. If this pressure is not equalized, it can cause the tank to collapse. Conversely, when liquid is withdrawn from the tank, the air pressure inside may drop, leading to a vacuum that can also damage the tank. Therefore, the tank vent serves as a safety mechanism, ensuring that pressure remains balanced and the tank operates safely.There are different types of tank vents available, including pressure relief vents, vacuum vents, and combination vents. Pressure relief vents are designed to open automatically when the internal pressure exceeds a certain threshold, allowing excess gas or vapor to escape. Vacuum vents, on the other hand, open when the internal pressure drops below atmospheric levels, allowing air to enter the tank. Combination vents incorporate both functions, providing a comprehensive solution for pressure and vacuum control.The design and placement of a tank vent are also crucial for its effectiveness. Vents should be located at the highest point of the tank to ensure that they function properly, and they must be sized appropriately to handle the expected flow rates of gases or vapors. Additionally, environmental factors such as wind and rain must be considered to prevent contamination or blockage of the vent.Regular maintenance and inspection of tank vents are vital for ensuring their reliability. Over time, vents can become clogged with debris or corroded, leading to potential failures. Operators must establish a routine maintenance schedule to check for any signs of wear or damage, ensuring that the vents are always in optimal working condition.In conclusion, the tank vent is an essential component in the safe operation of storage tanks. By allowing for the controlled exchange of air and gases, it helps to prevent dangerous pressure imbalances that could compromise the tank's structural integrity. Understanding the importance of tank vents and implementing proper maintenance practices can significantly enhance the safety and efficiency of industrial processes. As industries continue to evolve, the role of tank vents will remain pivotal in safeguarding both people and the environment from the potential hazards associated with stored liquids.

在工程和流体动力学的世界中，理解和掌握影响储罐功能的各种组件至关重要。其中一个组件是tank vent（储罐通气口），它在保持储罐完整性方面发挥着关键作用。tank vent旨在允许空气在液体水平变化时进入和排出储罐，从而防止压力或真空的积聚，这可能导致结构故障或泄漏。这在石油和天然气、化工和水处理等行业尤为重要，因为储罐内的内容物可能是危险或有价值的。当储罐被液体填充时，内部的空气体积减少，形成负压。如果这种压力不平衡，就可能导致储罐坍塌。相反，当从储罐中抽走液体时，内部压力可能下降，导致真空，这也会损坏储罐。因此，tank vent作为一种安全机制，确保压力保持平衡，储罐安全运行。有不同类型的tank vents可供选择，包括压力释放通气口、真空通气口和组合通气口。压力释放通气口设计为在内部压力超过某一阈值时自动开启，允许多余的气体或蒸汽逸出。另一方面，真空通气口在内部压力低于大气水平时开启，允许空气进入储罐。组合通气口结合了这两种功能，提供全面的压力和真空控制解决方案。tank vent的设计和位置对于其有效性也至关重要。通气口应位于储罐的最高点，以确保其正常工作，并且必须根据预期的气体或蒸汽流量适当尺寸。此外，风和雨等环境因素也必须考虑，以防止污染或阻塞通气口。定期维护和检查tank vents对确保其可靠性至关重要。随着时间的推移，通气口可能会因杂物堵塞或腐蚀而导致潜在故障。操作人员必须建立常规维护计划，以检查任何磨损或损坏的迹象，确保通气口始终处于最佳工作状态。总之，tank vent是储罐安全操作的重要组成部分。通过允许空气和气体的受控交换，它有助于防止可能危及储罐结构完整性的危险压力失衡。理解tank vents的重要性并实施适当的维护措施可以显著提高工业过程的安全性和效率。随着行业的不断发展，tank vents在保护人类和环境免受储存液体潜在危害方面仍将发挥关键作用。