straight tube economiser

简明释义

直管式经济器

英英释义

例句

1.Many industries are opting for straight tube economisers to reduce fuel consumption.

许多行业选择使用直管省煤器来减少燃料消耗。

2.By using a straight tube economiser, the boiler can recover more heat from the flue gases.

通过使用直管省煤器，锅炉可以从烟气中回收更多热量。

3.The design of the straight tube economiser allows for easy maintenance and cleaning.

该直管省煤器的设计便于维护和清洁。

4.The power plant installed a new straight tube economiser to improve its thermal efficiency.

发电厂安装了一台新的直管省煤器以提高其热效率。

5.The straight tube economiser enhances the overall efficiency of the heating system.

该直管省煤器提高了加热系统的整体效率。

作文

In the world of thermal engineering, efficiency is a key factor that determines the performance of various systems. One such system that plays a crucial role in enhancing energy efficiency is the straight tube economiser. This device is designed to recover waste heat from flue gases and utilize it to preheat the feedwater entering a boiler. By doing so, it significantly reduces the amount of fuel required for heating, leading to lower operational costs and reduced carbon emissions.The straight tube economiser operates on a simple yet effective principle. It consists of a series of straight tubes through which the feedwater flows. As the hot flue gases pass over these tubes, heat is transferred from the gases to the water, raising its temperature before it enters the boiler. This preheating process not only improves the overall efficiency of the boiler but also enhances its lifespan by reducing thermal stress.One of the primary advantages of using a straight tube economiser is its ability to improve the thermal efficiency of a steam generation system. In traditional setups without an economiser, a significant amount of heat is wasted in the exhaust gases. By incorporating this device, industries can capture that lost energy and use it effectively, resulting in substantial fuel savings. Studies have shown that the installation of a straight tube economiser can lead to energy savings of up to 10-20%, depending on the specific application and operating conditions.Furthermore, the straight tube economiser is relatively easy to maintain compared to other heat recovery systems. Its straightforward design minimizes the risk of fouling and scaling, which can hinder heat transfer efficiency. Regular maintenance, such as cleaning the tubes and checking for leaks, ensures that the economiser continues to operate at peak performance.In addition to its economic benefits, the use of a straight tube economiser also contributes to environmental sustainability. By reducing fuel consumption, it lowers greenhouse gas emissions associated with fossil fuel combustion. This aligns with global efforts to combat climate change and promotes a more sustainable industrial practice.Industries such as power generation, food processing, and chemical manufacturing have widely adopted straight tube economisers to optimize their operations. For example, in power plants, these devices are critical in maximizing the energy extracted from fuel, thereby increasing the overall output of electricity. In food processing, they help in maintaining the quality of products while minimizing energy costs.In conclusion, the straight tube economiser is an essential component in modern thermal systems, offering significant benefits in terms of energy efficiency, cost savings, and environmental impact. As industries continue to seek ways to enhance their operations and reduce their carbon footprint, the adoption of technologies like the straight tube economiser will play a vital role in achieving these goals. Understanding and implementing such innovations not only leads to better financial performance but also supports the broader movement towards sustainable industrial practices.

在热工程领域，效率是决定各种系统性能的关键因素。一个在提高能源效率方面发挥重要作用的系统是直管省煤器。该设备旨在回收烟气中的废热，并利用这些热量预热进入锅炉的给水。通过这样做，它显著减少了加热所需的燃料量，从而降低了运营成本和减少了碳排放。直管省煤器的工作原理简单而有效。它由一系列直管组成，给水通过这些管道流动。当热烟气经过这些管道时，热量从烟气传递到水中，提高其温度，然后再进入锅炉。这个预热过程不仅提高了锅炉的整体效率，还通过减少热应力来延长其使用寿命。使用直管省煤器的主要优点之一是能够提高蒸汽生成系统的热效率。在没有省煤器的传统设置中，排气中会浪费大量热量。通过引入该设备，工业可以捕获这些损失的能量并有效利用，从而实现显著的燃料节约。研究表明，安装直管省煤器可以带来高达10-20%的能源节约，具体取决于应用和操作条件。此外，与其他热回收系统相比，直管省煤器相对易于维护。其简单的设计最小化了污垢和结垢的风险，这可能会阻碍热传递效率。定期维护，如清洁管道和检查泄漏，确保省煤器保持最佳性能。除了经济利益外，使用直管省煤器还有助于环境可持续性。通过减少燃料消耗，它降低了与化石燃料燃烧相关的温室气体排放。这与全球应对气候变化的努力相一致，并促进更可持续的工业实践。发电、食品加工和化工等行业广泛采用直管省煤器来优化其运营。例如，在发电厂，这些设备在最大化从燃料提取的能量方面至关重要，从而增加电力的整体输出。在食品加工中，它们有助于维持产品质量，同时最小化能源成本。总之，直管省煤器是现代热系统中的一个重要组成部分，在能源效率、成本节约和环境影响方面提供了显著的好处。随着工业不断寻求提高运营效率和降低碳足迹的方法，像直管省煤器这样的技术的采用将在实现这些目标中发挥至关重要的作用。理解和实施这些创新不仅能带来更好的财务表现，还支持向可持续工业实践的更广泛运动。