stopping valve

简明释义

截止阀

英英释义

例句

1.During maintenance, always isolate the system by closing the stopping valve first.

在维护期间，始终先通过关闭停止阀来隔离系统。

2.Before replacing the pump, make sure to turn off the stopping valve to avoid spills.

在更换泵之前，请确保关闭停止阀以避免溢出。

3.The stopping valve is crucial for controlling the flow of water in the pipeline.

停止阀对于控制管道中的水流至关重要。

4.If there is a leak, you should immediately close the stopping valve to prevent further damage.

如果有泄漏，您应该立即关闭停止阀以防止进一步损坏。

5.The technician checked the stopping valve to ensure it was functioning properly before starting the system.

技术员检查了停止阀以确保在启动系统之前它正常工作。

作文

In various industries, the management of fluids is crucial for operational efficiency and safety. One essential component in fluid control systems is the stopping valve, which plays a vital role in regulating the flow of liquids and gases. A stopping valve (止流阀) is designed to either allow or prevent the passage of fluid through a pipeline, ensuring that processes can be safely controlled and maintained. Understanding how these valves function and their importance in different applications is key for engineers and technicians alike.The primary function of a stopping valve is to act as a barrier in a piping system. This valve can be opened or closed to manage the flow of fluids, making it an indispensable tool in many settings, such as water supply systems, chemical processing plants, and oil refineries. For instance, in a water distribution network, a stopping valve (止流阀) can be used to isolate sections of the pipeline for maintenance without disrupting the entire system. This capability is crucial for minimizing downtime and ensuring that services remain uninterrupted for consumers.Moreover, the design of a stopping valve can vary depending on its intended application. There are several types of stopping valves, including gate valves, globe valves, and ball valves, each with its unique mechanism for controlling flow. Gate valves, for example, are often used in applications where a straight-line flow of fluid and minimum restriction is necessary. In contrast, globe valves are better suited for applications requiring precise flow control. Understanding these differences helps engineers select the appropriate valve for specific situations, optimizing performance and safety.Another important aspect of stopping valves is their role in emergency situations. In the event of a leak or a burst pipe, quickly closing a stopping valve (止流阀) can prevent significant fluid loss and potential hazards. This rapid response capability is essential in industries where hazardous materials are handled, as it can mitigate risks to personnel and the environment. Regular maintenance and testing of these valves are critical to ensure they function properly when needed.In addition to their practical applications, stopping valves also contribute to energy efficiency. By controlling the flow of fluids, these valves help reduce waste and optimize the performance of pumps and other equipment in a system. For example, in heating systems, a well-functioning stopping valve (止流阀) can help maintain the desired temperature by regulating the flow of hot water or steam, thus improving overall energy usage.As technology advances, the design and functionality of stopping valves continue to evolve. Innovations such as automated valves and smart sensors are being integrated into modern systems, allowing for real-time monitoring and control. This shift towards automation not only enhances efficiency but also improves safety by reducing the need for manual intervention in potentially dangerous situations.In conclusion, the stopping valve (止流阀) is a fundamental component in fluid control systems across various industries. Its ability to regulate flow, isolate sections of pipelines, and respond to emergencies makes it an invaluable tool for maintaining operational efficiency and safety. As technology progresses, the role of stopping valves will likely expand, further enhancing their importance in industrial applications. Understanding the significance of these valves is essential for anyone involved in engineering, maintenance, or operations within fluid management systems.

在各个行业中，流体的管理对于运营效率和安全至关重要。流体控制系统中的一个基本组成部分是止流阀，它在调节液体和气体的流动中发挥着重要作用。止流阀（stopping valve）旨在允许或阻止流体通过管道，从而确保过程能够安全地控制和维护。理解这些阀门的功能及其在不同应用中的重要性，对于工程师和技术人员来说至关重要。止流阀的主要功能是作为管道系统中的屏障。该阀门可以打开或关闭，以管理流体的流动，使其成为许多环境中不可或缺的工具，例如供水系统、化学加工厂和石油精炼厂。例如，在水分配网络中，止流阀（stopping valve）可用于隔离管道的某些部分，以便进行维护，而不干扰整个系统。这种能力对于最小化停机时间并确保消费者服务不间断至关重要。此外，止流阀的设计可以根据其预期应用而有所不同。有几种类型的止流阀，包括闸阀、截止阀和球阀，每种阀门都有其独特的控制流动机制。例如，闸阀通常用于需要直线流动和最小阻力的应用。相比之下，截止阀更适合需要精确流量控制的应用。理解这些差异有助于工程师为特定情况选择合适的阀门，从而优化性能和安全性。止流阀的另一个重要方面是它们在紧急情况下的作用。在发生泄漏或管道爆裂时，迅速关闭止流阀（stopping valve）可以防止大量流体损失和潜在危害。这种快速响应能力在处理危险材料的行业中尤为重要，因为它可以减轻对人员和环境的风险。定期维护和测试这些阀门对于确保它们在需要时正常工作至关重要。除了它们的实际应用外，止流阀还促进了能源效率。通过控制流体的流动，这些阀门有助于减少浪费并优化系统中泵和其他设备的性能。例如，在加热系统中，功能良好的止流阀（stopping valve）可以通过调节热水或蒸汽的流动来帮助维持所需的温度，从而改善整体能耗。随着技术的进步，止流阀的设计和功能也在不断发展。自动化阀门和智能传感器等创新正在被集成到现代系统中，允许实时监控和控制。这种向自动化的转变不仅提高了效率，还通过减少在潜在危险情况下手动干预的需要，提高了安全性。总之，止流阀（stopping valve）是各个行业流体控制系统中的基本组成部分。它调节流动、隔离管道段和应对紧急情况的能力，使其成为维护运营效率和安全性的宝贵工具。随着技术的进步，止流阀的角色可能会进一步扩展，进一步增强其在工业应用中的重要性。理解这些阀门的重要性对于参与流体管理系统中的工程、维护或运营的任何人来说都是必不可少的。