stopping procedure

简明释义

停车顺序

英英释义

例句

1.Make sure to follow the stopping procedure outlined in the manual before performing maintenance.

在进行维护之前，请务必遵循手册中列出的停止程序。

2.During the training, we practiced the stopping procedure for emergency situations.

在培训期间，我们练习了紧急情况下的停止程序。

3.If the system detects a fault, it will automatically initiate the stopping procedure.

如果系统检测到故障，它将自动启动停止程序。

4.The pilot reviewed the stopping procedure before landing to ensure passenger safety.

飞行员在降落前复习了停止程序以确保乘客安全。

5.The technician explained the stopping procedure to ensure the machine would shut down safely.

技术人员解释了停止程序，以确保机器安全关闭。

作文

In the realm of engineering and machinery, the term stopping procedure refers to the systematic steps taken to safely halt the operation of a machine or process. This is particularly crucial in industries where heavy machinery is used, as improper stopping can lead to accidents, equipment damage, or even catastrophic failures. Understanding the stopping procedure is essential for operators and engineers alike to ensure safety and efficiency in their work environments.A well-defined stopping procedure typically begins with assessing the current state of the machinery. Operators must first ensure that all processes are monitored and that the machine is functioning correctly before initiating a stop. This involves checking gauges, indicators, and alarms to confirm that it is safe to proceed. Once verified, the operator can begin the stopping sequence, which usually includes reducing the speed of the machine gradually rather than an abrupt halt. This gradual reduction helps prevent mechanical shock and wear on the components of the machine.Next, the operator must follow specific commands or controls that are part of the stopping procedure. These may vary depending on the type of machinery involved but often include shutting down power sources, disengaging clutches, and activating emergency brakes if necessary. Each step should be executed precisely to avoid any unintended consequences. It is also important to communicate with team members during this process to ensure everyone is aware of the actions being taken.After the machine has been brought to a complete stop, the final steps of the stopping procedure involve securing the equipment. This can include locking out power sources, performing safety checks, and conducting inspections to ensure that no hazards remain. Proper documentation of the stopping process is also vital, as it provides a record for future reference and helps in maintaining compliance with safety regulations.Moreover, training plays a significant role in the effectiveness of the stopping procedure. Regular training sessions for operators can enhance their understanding of the machines they work with and the importance of following established protocols. This not only improves safety but also contributes to the overall efficiency of operations. When workers are well-trained, they are more likely to respond appropriately in emergencies, thereby reducing the risk of accidents.In conclusion, the stopping procedure is a critical component of operational safety in various industries. By understanding and implementing a comprehensive stopping protocol, organizations can protect their employees, maintain equipment integrity, and ensure a safer working environment. The emphasis on training and communication cannot be overstated, as these factors significantly influence the success of the stopping procedures. Ultimately, a well-executed stopping procedure is not just about halting operations; it is about doing so in a manner that prioritizes safety and efficiency above all else.

在工程和机械领域，术语stopping procedure指的是安全停止机器或过程操作所采取的系统步骤。这在使用重型机械的行业中尤为重要，因为不当的停止可能导致事故、设备损坏甚至灾难性故障。理解stopping procedure对操作员和工程师来说至关重要，以确保他们工作环境中的安全和效率。一个定义明确的stopping procedure通常始于评估机器的当前状态。操作员必须首先确保所有过程都在监控中，并且机器正常运行，然后才能开始停止。这涉及检查仪表、指示器和警报，以确认安全进行下一步。一旦确认，操作员可以开始停止序列，通常包括逐渐降低机器速度，而不是突然停止。这种逐渐减速有助于防止机械冲击和机器部件的磨损。接下来，操作员必须遵循特定的命令或控制，这些都是stopping procedure的一部分。这些步骤可能因所涉及的机器类型而异，但通常包括关闭电源、脱离离合器以及在必要时激活紧急制动。每一步都应准确执行，以避免任何意外后果。在此过程中，与团队成员沟通也很重要，以确保每个人都意识到正在采取的行动。机器完全停止后，stopping procedure的最后步骤涉及确保设备的安全。这可能包括锁定电源、进行安全检查和进行检查，以确保没有危险存在。适当记录停止过程也至关重要，因为它为将来的参考提供了记录，并有助于保持遵守安全法规。此外，培训在stopping procedure的有效性中发挥着重要作用。定期为操作员举办培训课程可以增强他们对所操作机器的理解，以及遵循既定协议的重要性。这不仅提高了安全性，还促进了操作的整体效率。当工人经过良好培训时，他们更有可能在紧急情况下做出适当反应，从而降低事故风险。总之，stopping procedure是各行各业操作安全的关键组成部分。通过理解和实施全面的停止协议，组织可以保护员工、维护设备完整性，并确保更安全的工作环境。对培训和沟通的重视不可低估，因为这些因素显著影响停止程序的成功。最终，执行良好的stopping procedure不仅仅是关于停止操作；而是以优先考虑安全和效率的方式来做到这一点。