stern tube bulkhead

简明释义

尾轴管舱壁

英英释义

例句

1.The engineer inspected the stern tube bulkhead to ensure there were no leaks.

工程师检查了尾管隔墙以确保没有泄漏。

2.During maintenance, we had to remove the stern tube bulkhead for better access to the propeller shaft.

在维护期间，我们必须拆除尾管隔墙以更好地接触螺旋桨轴。

3.The design of the stern tube bulkhead is crucial for the vessel's structural integrity.

设计尾管隔墙对船舶的结构完整性至关重要。

4.We installed a new stern tube bulkhead to improve the ship's performance.

我们安装了新的尾管隔墙以提高船舶的性能。

5.A failure in the stern tube bulkhead could lead to severe water ingress.

如果尾管隔墙发生故障，可能会导致严重的进水。

作文

The design and construction of ships involve numerous intricate components, each serving a specific purpose to ensure the vessel's functionality and safety. One such critical component is the stern tube bulkhead, which plays an essential role in separating different sections of the ship and maintaining the integrity of its structure. Understanding the significance of the stern tube bulkhead is vital for anyone involved in maritime engineering or naval architecture.The stern tube bulkhead is a structural partition located at the rear of a ship, specifically designed to house the stern tube, which connects the ship’s propulsion system to the propeller. This bulkhead acts as a barrier between the engine room and the stern tube area, preventing water from entering the ship's interior in case of a leak. It also provides support for the shaft that drives the propeller, ensuring that it remains aligned and functions correctly under various operational conditions.In terms of safety, the stern tube bulkhead is crucial. It helps to contain any potential flooding that might occur due to a failure in the stern tube or its seals. By effectively isolating the engine room from the stern tube area, the bulkhead minimizes the risk of water damage to critical machinery and electrical systems located within the engine room. This isolation is particularly important during emergencies, as it allows crew members to manage flooding without jeopardizing the entire vessel's operability.Moreover, the construction materials used for the stern tube bulkhead are selected based on their strength and resistance to corrosion, given that they are often exposed to harsh marine environments. High-quality steel or aluminum alloys are typically used, ensuring that the bulkhead can withstand the pressures exerted by water during navigation. The design must also comply with maritime regulations and standards, which dictate the minimum requirements for structural integrity and safety.From an engineering perspective, the stern tube bulkhead must be meticulously designed to accommodate not only the stern tube but also other associated components, such as bearings and seals. This requires precise calculations and modeling to ensure that all parts fit together seamlessly and operate efficiently. Engineers often use advanced software tools to simulate the stresses and forces acting on the bulkhead during various operational scenarios, allowing them to optimize the design before actual construction begins.In conclusion, the stern tube bulkhead is a fundamental element in ship design that contributes significantly to the vessel's safety and operational efficiency. Its role in preventing water ingress and supporting the propulsion system cannot be overstated. For those studying naval architecture or working in the maritime industry, a thorough understanding of the stern tube bulkhead and its functions is essential. As technology advances, the design and materials used for this component will continue to evolve, further enhancing the safety and performance of modern ships.

船舶的设计和建造涉及许多复杂的组件，每个组件都具有特定的功能，以确保船只的功能性和安全性。其中一个关键组件是船尾管隔板，它在分隔船舶的不同部分和维持其结构完整性方面发挥着重要作用。理解船尾管隔板的重要性对于任何参与海事工程或船舶建筑的人来说都是至关重要的。船尾管隔板是位于船舶后部的结构隔板，专门设计用于容纳船尾管，该管道将船舶的推进系统与螺旋桨连接。这个隔板充当了发动机舱和船尾管区域之间的屏障，防止水在泄漏的情况下进入船舶内部。它还为驱动螺旋桨的轴提供支撑，确保在各种操作条件下保持对齐并正常运行。在安全方面，船尾管隔板至关重要。它有助于控制由于船尾管或其密封件故障而可能发生的任何潜在洪水。通过有效地将发动机舱与船尾管区域隔离，隔板最大限度地降低了水对位于发动机舱内的关键机械和电气系统造成损坏的风险。这种隔离在紧急情况下尤为重要，因为它允许船员在不危及整个船舶可操作性的情况下管理洪水。此外，船尾管隔板所使用的建筑材料是根据其强度和耐腐蚀性进行选择的，因为它们通常暴露在恶劣的海洋环境中。通常使用高质量的钢材或铝合金，确保隔板能够承受航行过程中水施加的压力。设计还必须符合海事法规和标准，这些标准规定了结构完整性和安全性的最低要求。从工程学的角度来看，船尾管隔板必须经过精心设计，以适应不仅仅是船尾管，还有其他相关组件，如轴承和密封件。这需要精确的计算和建模，以确保所有部件无缝配合并高效运行。工程师们通常使用先进的软件工具来模拟在各种操作场景下作用于隔板的应力和力量，从而在实际建造开始之前优化设计。总之，船尾管隔板是船舶设计中的基本元素，对船舶的安全性和操作效率有着显著贡献。它在防止水渗入和支持推进系统方面的作用不可低估。对于学习船舶建筑或在海事行业工作的人来说，深入理解船尾管隔板及其功能是必不可少的。随着技术的发展，这个组件的设计和材料将继续演变，进一步增强现代船舶的安全性和性能。