stalling current

简明释义

停转电流

英英释义

例句

1.The technician explained that the stalling current 停滞电流 could cause the motor to overheat if not addressed promptly.

技术人员解释说，停滞电流 stalling current 如果不及时处理，可能会导致电动机过热。

2.Understanding the stalling current 停滞电流 helps in designing safer electrical systems.

理解停滞电流 stalling current 有助于设计更安全的电气系统。

3.If the stalling current 停滞电流 exceeds the limit, it may trigger an automatic shutdown.

如果停滞电流 stalling current 超过限制，可能会触发自动关闭。

4.In the circuit design, we need to account for the stalling current 停滞电流 to ensure proper functionality.

在电路设计中，我们需要考虑到停滞电流 stalling current 以确保正常功能。

5.The engineer monitored the stalling current 停滞电流 to prevent any damage to the system during testing.

工程师监测停滞电流 stalling current 以防止测试期间系统受到任何损坏。

作文

In the world of electrical engineering, understanding the concept of current is fundamental. Current refers to the flow of electric charge and is measured in amperes. However, there are instances where we encounter specific terms that describe variations in current behavior. One such term is stalling current, which refers to the moment when the current flowing through a circuit ceases to increase despite the presence of an applied voltage. This phenomenon can occur in various electrical systems, including motors and other devices that rely on electromagnetic principles.To better grasp the implications of stalling current, consider the example of an electric motor. When an electric motor starts, it draws a significant amount of current to overcome inertia and initiate motion. This initial surge of current is known as starting or inrush current. However, once the motor reaches its operational speed, the current stabilizes at a lower level, allowing the motor to function efficiently. If the motor encounters resistance or a load that exceeds its capacity, it may reach a point where it cannot increase its output, leading to a condition described as stalling current.In practical applications, recognizing the conditions that lead to stalling current is crucial for engineers and technicians. For instance, in robotics, if a robotic arm attempts to lift an object that is too heavy, it may experience stalling current. This not only affects the performance of the robot but can also cause overheating, damage to components, or even failure of the system. Therefore, it is essential to design systems with appropriate safeguards and limits to prevent reaching this critical state.Moreover, the concept of stalling current is not limited to just motors. It can also apply to other electronic devices such as transformers and power supplies. In these cases, designers must consider the stalling current during the design phase to ensure that the device operates within safe parameters. This requires a thorough understanding of the materials used, the expected loads, and the environmental conditions under which the device will operate.In conclusion, the term stalling current encapsulates a significant aspect of electrical engineering that highlights the importance of current behavior in various devices. By understanding this concept, engineers can design more robust and efficient systems that minimize the risk of failure and enhance overall performance. The knowledge of stalling current serves as a reminder of the delicate balance between electrical forces and mechanical loads, emphasizing the need for careful planning and consideration in the design of electrical systems.

在电气工程的世界中，理解电流的概念是基础。电流指的是电荷的流动，以安培为单位进行测量。然而，在某些情况下，我们会遇到描述电流行为变化的特定术语。其中一个术语是stalling current，它指的是在施加电压的情况下，流经电路的电流在某一时刻停止增加的现象。这种现象可以发生在各种电气系统中，包括电动机和其他依赖于电磁原理的设备。为了更好地理解stalling current的含义，可以考虑电动机的例子。当电动机启动时，它会吸引大量的电流以克服惯性并启动运动。这种初始的电流激增被称为起动电流或涌入电流。然而，一旦电动机达到其工作速度，电流将稳定在一个较低的水平，使电动机能够高效运转。如果电动机遇到超出其能力的阻力或负载，它可能会达到一个无法增加输出的点，从而导致出现stalling current的情况。在实际应用中，识别导致stalling current的条件对于工程师和技术人员至关重要。例如，在机器人技术中，如果一个机器人手臂试图举起一个过重的物体，它可能会遭遇stalling current。这不仅影响机器人的性能，还可能导致过热、组件损坏，甚至系统故障。因此，设计系统时必须采取适当的安全措施和限制，以防止达到这一临界状态。此外，stalling current的概念不仅限于电动机。它还可以适用于变压器和电源等其他电子设备。在这些情况下，设计人员必须在设计阶段考虑stalling current，以确保设备在安全参数内运行。这需要对所用材料、预期负载以及设备将要运行的环境条件有充分的理解。总之，术语stalling current概括了电气工程中的一个重要方面，突出了电流行为在各种设备中的重要性。通过理解这个概念，工程师可以设计出更加稳健和高效的系统，最大限度地减少故障风险，提高整体性能。对stalling current的知识提醒我们电力与机械负载之间的微妙平衡，强调在电气系统设计中需要谨慎规划和考虑。