spot gluing

简明释义

点粘结

英英释义

例句

1.For the model airplane, spot gluing is essential to keep the wings attached securely.

对于模型飞机来说，局部粘合是确保机翼牢固连接的关键。

2.The furniture assembly guide recommended using spot gluing to reinforce the joints.

家具组装指南建议使用局部粘合来加固接缝。

3.The technician performed spot gluing on the circuit board to fix loose components.

技术员在电路板上进行了局部粘合以修复松动的元件。

4.In the art project, we used spot gluing to attach small pieces of paper without making a mess.

在艺术项目中，我们使用局部粘合将小纸片粘贴在一起，而不弄得一团糟。

5.During the repair, we opted for spot gluing instead of full adhesive coverage to avoid excess glue.

在修理过程中，我们选择了局部粘合而不是全面涂胶，以避免多余的胶水。

作文

In the world of manufacturing and production, various techniques are employed to ensure that products are assembled efficiently and effectively. One such technique is spot gluing, which refers to the process of applying adhesive to specific points or areas on a surface rather than covering the entire area with glue. This method is particularly useful in situations where only certain parts of an object need to be bonded together, allowing for greater precision and control over the assembly process. spot gluing (点胶) can be seen in various industries, including automotive, furniture, and electronics, where it is essential to maintain structural integrity while minimizing the use of materials.The advantages of spot gluing are numerous. First and foremost, it reduces the amount of adhesive used, which can lead to cost savings for manufacturers. By applying glue only where it is needed, companies can cut down on waste and improve their overall efficiency. Additionally, this technique can help prevent excess glue from seeping out and creating messy appearances or interfering with the functionality of the product. For instance, in the production of electronic devices, too much adhesive can obstruct connections or cause overheating.Moreover, spot gluing allows for quicker drying times since less adhesive is applied. This can significantly speed up the production process, enabling companies to meet tight deadlines and deliver products to market faster. In industries where time is of the essence, such as consumer electronics, this advantage cannot be overstated.Another important aspect of spot gluing is its versatility. This technique can be used with various types of adhesives, including hot melt, epoxy, and cyanoacrylate, making it suitable for a wide range of applications. For example, in the furniture industry, spot gluing is often used to bond joints in wooden pieces without compromising the aesthetic appeal of the finished product. By strategically placing glue at key points, manufacturers can create strong bonds while maintaining clean lines and finishes.However, it is essential to note that spot gluing requires careful planning and execution. The success of this technique relies heavily on the proper placement of the adhesive. If the glue is applied in the wrong spots or in insufficient amounts, the bond may not hold, leading to product failures and increased costs due to rework or returns. Therefore, employees must be trained adequately in the application process to ensure consistent results.In conclusion, spot gluing (点胶) is a valuable technique in modern manufacturing that offers numerous benefits, including reduced material usage, faster production times, and enhanced versatility. As industries continue to evolve and seek more efficient methods of production, the importance of mastering techniques like spot gluing will only grow. By understanding and implementing this method effectively, manufacturers can improve their processes and ultimately deliver better products to consumers.

在制造和生产的世界中，各种技术被用来确保产品高效而有效地组装。其中一种技术是点胶，它指的是将粘合剂应用于表面的特定点或区域，而不是在整个区域涂抹胶水。这种方法在只有某些部分需要粘合在一起的情况下特别有用，从而允许对组装过程进行更大的精确控制。点胶可以在汽车、家具和电子等各种行业中看到，在这些行业中，保持结构完整性同时最小化材料的使用是至关重要的。点胶的优点是众多的。首先，它减少了所使用的粘合剂数量，这可以为制造商节省成本。通过仅在需要的地方施加胶水，公司可以减少浪费并提高整体效率。此外，这种技术可以帮助防止多余的胶水渗出，造成杂乱的外观或干扰产品的功能。例如，在电子设备的生产中，过多的粘合剂可能会阻碍连接或导致过热。此外，点胶由于施加的粘合剂较少，干燥时间也可以缩短。这可以显著加快生产过程，使公司能够满足紧迫的截止日期并更快地将产品推向市场。在时间至关重要的行业中，例如消费电子，这一优势不容小觑。点胶的另一个重要方面是其多功能性。这种技术可以与各种类型的粘合剂一起使用，包括热熔胶、环氧树脂和氰基丙烯酸酯，使其适用于广泛的应用。例如，在家具行业，点胶通常用于粘合木件的接头，而不影响成品的美观。通过在关键点上战略性地放置胶水，制造商可以创造强大的粘合，同时保持干净的线条和表面。然而，需要注意的是，点胶需要仔细的规划和执行。这种技术的成功在很大程度上依赖于粘合剂的正确放置。如果胶水施加在错误的地方或数量不足，粘合可能无法保持，导致产品故障和因返工或退货而增加的成本。因此，员工必须经过充分培训，以确保应用过程的一致性。总之，点胶是现代制造中一种有价值的技术，提供了许多好处，包括减少材料使用、更快的生产时间和增强的多功能性。随着行业不断发展并寻求更高效的生产方法，掌握像点胶这样的技术的重要性只会增加。通过有效理解和实施这种方法，制造商可以改善其流程，并最终向消费者提供更好的产品。