stop lever

简明释义

止动杆

英英释义

例句

1.Always keep the stop lever (停止杠杆) within reach while operating heavy equipment.

在操作重型设备时，请始终将停止杠杆保持在可触及的范围内。

2.In case of an emergency, pull the stop lever (停止杠杆) immediately to halt operations.

在紧急情况下，请立即拉动停止杠杆以停止操作。

3.To reset the system, you need to push the stop lever (停止杠杆) back to its original position.

要重置系统，您需要将停止杠杆推回到原始位置。

4.Before starting the machine, make sure to check the position of the stop lever (停止杠杆).

在启动机器之前，请确保检查停止杠杆的位置。

5.The operator noticed that the stop lever (停止杠杆) was stuck and couldn't stop the machine.

操作员注意到停止杠杆卡住了，无法停止机器。

作文

In the world of machinery and mechanical devices, safety is a paramount concern. One of the essential components that contribute to this safety is the stop lever. The stop lever is a mechanism designed to halt the operation of a machine or device quickly and effectively. It serves as an emergency stop feature that can prevent accidents and injuries by allowing operators to cease operations swiftly when necessary. Understanding the function and importance of the stop lever is crucial for anyone working with heavy machinery or complex equipment.The stop lever is typically located in an easily accessible position, often near the operating controls of the machine. This strategic placement ensures that operators can reach it without delay in case of an emergency. For instance, in factories where machines operate at high speeds, having a stop lever within arm's reach can be the difference between a minor incident and a catastrophic accident. The design of the stop lever varies depending on the type of machinery; some may have a simple pull mechanism, while others might require a push or twist action.Moreover, the effectiveness of a stop lever is not only determined by its physical design but also by how well operators are trained to use it. Regular training sessions should emphasize the importance of knowing the location and function of the stop lever. Operators should practice scenarios where they need to use the stop lever to ensure that they can respond instinctively in real emergencies. This training can significantly reduce response times and enhance safety protocols in the workplace.In addition to its role in preventing accidents, the stop lever also plays a significant role in routine maintenance and troubleshooting. When a machine malfunctions, the first step is often to engage the stop lever to prevent further damage or hazards. By halting the machine, technicians can safely assess the situation and address any issues without risking injury or exacerbating the problem. Therefore, understanding how to operate the stop lever is not just about safety; it is also about effective machine management.Furthermore, advancements in technology have led to the development of more sophisticated stop levers. Some modern machines now incorporate electronic systems that allow for remote shutdown capabilities. This innovation means that operators can stop a machine from a distance, adding an extra layer of safety, especially in hazardous environments. However, regardless of how advanced these systems become, the fundamental principle remains the same: the stop lever is a critical component for ensuring safety in machinery operations.In conclusion, the stop lever is an indispensable part of any machine that requires careful handling and operation. Its primary purpose is to provide a quick and efficient way to halt machinery during emergencies, thus protecting both operators and equipment. Training on the proper use of the stop lever should be prioritized in workplaces where heavy machinery is used, and ongoing education about its importance can foster a culture of safety. As technology continues to evolve, the stop lever will remain a vital element in promoting safe practices in industrial settings. Understanding and mastering the stop lever is essential for anyone involved in operating or maintaining machinery, making it a key focus for safety training programs worldwide.

在机械和机械设备的世界中，安全是最重要的关注点之一。一个有助于安全的重要组成部分是停止杠杆。停止杠杆是一种机制，旨在快速有效地停止机器或设备的运行。它作为一种紧急停止功能，可以通过允许操作员在必要时迅速停止操作，从而防止事故和伤害。理解停止杠杆的功能和重要性对于任何与重型机械或复杂设备工作的人来说都是至关重要的。停止杠杆通常位于一个易于接触的位置，通常靠近机器的操作控制。这种战略性的位置确保操作员在紧急情况下可以毫不延迟地到达它。例如，在高速运转的工厂中，将停止杠杆放在手边可能是小事故和灾难性事故之间的区别。停止杠杆的设计因机器类型而异，有些可能具有简单的拉动机制，而其他的可能需要推或扭动动作。此外，停止杠杆的有效性不仅取决于其物理设计，还取决于操作员对其使用的培训程度。定期培训课程应强调了解停止杠杆的位置和功能的重要性。操作员应练习需要使用停止杠杆的场景，以确保他们能够在真实的紧急情况下本能地做出反应。这种培训可以显著减少反应时间，提高工作场所的安全协议。除了在预防事故中的作用外，停止杠杆在日常维护和故障排除中也发挥着重要作用。当机器发生故障时，第一步通常是启用停止杠杆以防止进一步损坏或危险。通过停止机器，技术人员可以安全地评估情况并解决任何问题，而不会冒着受伤或加剧问题的风险。因此，了解如何操作停止杠杆不仅关乎安全，也关乎有效的机器管理。此外，技术的进步导致了更复杂的停止杠杆的发展。一些现代机器现在集成了允许远程关闭功能的电子系统。这一创新意味着操作员可以从远处停止机器，为危险环境增加了一层额外的安全性。然而，无论这些系统变得多么先进，基本原则仍然是：停止杠杆是确保机器操作安全的关键组件。总之，停止杠杆是任何需要谨慎处理和操作的机器中不可或缺的一部分。它的主要目的是在紧急情况下提供快速有效的方式来停止机器，从而保护操作员和设备。应优先考虑在使用重型机械的工作场所对停止杠杆的正确使用进行培训，并且关于其重要性的持续教育可以促进安全文化。在技术不断发展的过程中，停止杠杆将继续成为促进工业环境安全实践的关键元素。理解和掌握停止杠杆对于任何参与操作或维护机械的人来说都是至关重要的，这使其成为全球安全培训项目的重点。