side intercostal stringer

简明释义

间断边纵骨

英英释义

例句

1.The design of the side intercostal stringer 侧肋条 is crucial for maintaining the structural integrity of the wing.

侧肋条 side intercostal stringer 的设计对维持机翼的结构完整性至关重要。

2.The technician measured the thickness of the side intercostal stringer 侧肋条 to ensure it met safety standards.

技术员测量了侧肋条 side intercostal stringer 的厚度，以确保其符合安全标准。

3.In the assembly process, ensure that each side intercostal stringer 侧肋条 is properly aligned.

在组装过程中，确保每个侧肋条 side intercostal stringer 都正确对齐。

4.The engineer explained how the side intercostal stringer 侧肋条 provides additional support to the aircraft's fuselage.

工程师解释了如何通过侧肋条 side intercostal stringer 为飞机机身提供额外的支撑。

5.During the inspection, we found that the side intercostal stringer 侧肋条 was damaged and needed replacement.

在检查过程中，我们发现侧肋条 side intercostal stringer 损坏，需要更换。

作文

In the field of marine engineering, the term side intercostal stringer refers to a structural element that plays a crucial role in the integrity and strength of a ship's hull. These stringers are longitudinal members that run parallel to the length of the vessel, connecting various frames and providing support to the hull plating. The side intercostal stringer specifically is located on the sides of the ship, helping to distribute loads and resist lateral forces that the vessel may encounter while navigating through water.Understanding the function of the side intercostal stringer is essential for shipbuilders and engineers. These components are designed to enhance the overall stiffness of the hull, which is vital for maintaining the shape and durability of the vessel under various conditions. When a ship is subjected to waves, wind, and other environmental factors, the forces exerted on the hull can lead to deformation if not properly supported. This is where the side intercostal stringer comes into play, as it helps to maintain the structural integrity of the ship.The materials used for constructing side intercostal stringers are typically high-strength steel or aluminum alloys, chosen for their ability to withstand harsh marine environments. The design of these stringers must also take into account factors such as corrosion resistance, weight, and ease of installation. Engineers often use advanced modeling software to simulate the stresses and strains that the hull will experience during its operational life, allowing them to optimize the placement and dimensions of the side intercostal stringer for maximum effectiveness.Moreover, the installation of side intercostal stringers is a critical phase in the shipbuilding process. Skilled workers must ensure that these components are aligned correctly and securely attached to the frames and hull plating. Any misalignment can lead to weaknesses that may compromise the safety and performance of the vessel. Therefore, rigorous quality control measures are implemented during construction to verify that each side intercostal stringer meets the required specifications.In addition to their structural benefits, side intercostal stringers also contribute to the overall design aesthetics of the ship. A well-designed hull with appropriately placed stringers can enhance the vessel's hydrodynamic properties, leading to improved fuel efficiency and performance. Shipowners and operators are increasingly recognizing the importance of these elements not only for safety but also for economic advantages in terms of operational costs.In conclusion, the side intercostal stringer is an indispensable component in marine engineering, ensuring the strength and durability of a ship's hull. Its role in distributing loads, resisting lateral forces, and contributing to the overall design makes it a focal point in shipbuilding. As technology advances, the design and materials used for side intercostal stringers will continue to evolve, further enhancing the performance and safety of marine vessels. Understanding this term and its implications is crucial for anyone involved in the maritime industry, from engineers to ship operators, as they work together to build safer and more efficient ships for the future.

在海洋工程领域，术语侧肋条指的是一种结构元素，在船体的完整性和强度中起着关键作用。这些肋条是沿船只长度平行延伸的纵向构件，连接各种框架，并为船体板提供支持。特定的侧肋条位于船的两侧，帮助分配负荷并抵抗船只在水中航行时可能遇到的横向力量。理解侧肋条的功能对于造船工人和工程师至关重要。这些组件旨在增强船体的整体刚度，这对于在各种条件下保持船只的形状和耐用性至关重要。当船只受到波浪、风和其他环境因素的影响时，施加在船体上的力量如果没有得到适当支持，可能会导致变形。这就是侧肋条发挥作用的地方，因为它有助于维护船只的结构完整性。用于制造侧肋条的材料通常是高强度钢或铝合金，因其能够承受恶劣的海洋环境。设计这些肋条时还必须考虑腐蚀阻力、重量和安装的便利性。工程师们通常使用先进的建模软件来模拟船体在其作业生命周期中将经历的应力和应变，从而优化侧肋条的放置和尺寸，以实现最大效果。此外，安装侧肋条是造船过程中一个关键阶段。熟练的工人必须确保这些组件正确对齐并牢固地附着在框架和船体板上。任何不对齐都可能导致弱点，从而危及船只的安全性和性能。因此，在施工过程中实施严格的质量控制措施，以验证每个侧肋条是否符合要求的规格。除了其结构优势外，侧肋条还为船只的整体设计美学做出了贡献。设计良好的船体与适当放置的肋条可以增强船只的水动力特性，从而提高燃油效率和性能。船东和运营商越来越认识到这些元素的重要性，不仅关乎安全，还涉及运营成本方面的经济优势。总之，侧肋条是海洋工程中不可或缺的组成部分，确保船体的强度和耐用性。它在分配负荷、抵抗横向力量以及对整体设计的贡献，使其成为造船过程中的一个焦点。随着技术的进步，用于侧肋条的设计和材料将继续发展，进一步提升海洋船舶的性能和安全性。理解这个术语及其含义对于任何参与海事行业的人来说都是至关重要的，从工程师到船舶运营商，他们共同努力，为未来建造更安全、更高效的船舶。