shaft skid

简明释义

推进轴安装滑座

英英释义

Shaft skid refers to a condition where the shaft of a rotating machine, such as a turbine or motor, experiences excessive lateral movement or displacement, often resulting in damage or failure.

轴滑是指旋转机器（如涡轮或电动机）的轴经历过度的横向移动或位移的状态，通常导致损坏或故障。

例句

1.The engineer noticed a significant increase in wear on the bearings due to the shaft skid 轴滑 during operation.

工程师注意到由于操作过程中发生了< 报告 >轴滑< /报告 >，轴承的磨损显著增加。

2.Excessive vibration can lead to shaft skid 轴滑 and ultimately equipment failure.

过度振动可能导致< 报告 >轴滑< /报告 >，最终导致设备故障。

3.The team implemented a new lubrication system to reduce shaft skid 轴滑 incidents.

团队实施了一种新的润滑系统，以减少< 报告 >轴滑< /报告 >事件。

4.The technician adjusted the alignment to minimize shaft skid 轴滑 issues.

技术员调整了对准以最小化< 报告 >轴滑< /报告 >问题。

5.To prevent shaft skid 轴滑, regular maintenance checks are essential.

为了防止< 报告 >轴滑< /报告 >，定期维护检查是必不可少的。

作文

In the realm of engineering and mechanics, the term shaft skid refers to a condition where the shaft of a rotating machine does not maintain its intended position during operation. This phenomenon can lead to various operational issues, including excessive wear, vibration, and even catastrophic failure of the machinery involved. Understanding the implications of shaft skid is crucial for engineers and technicians who are responsible for maintaining the integrity and performance of rotating equipment.When a machine operates, its components are designed to work in harmony. The shaft, which is a central component in many machines, must rotate smoothly and remain aligned with other parts to ensure efficiency. However, when shaft skid occurs, it indicates that the shaft has shifted from its proper alignment, often due to external forces or internal malfunctions. This misalignment can result from factors such as improper installation, lack of lubrication, or wear and tear over time.The consequences of shaft skid can be severe. For instance, if the shaft is not properly aligned, it can lead to uneven distribution of forces within the machine. This unevenness can cause increased friction and heat generation, leading to further damage to the shaft and surrounding components. In some cases, the machine may experience vibrations that can be felt throughout the structure, signaling an urgent need for maintenance.To prevent shaft skid, regular maintenance and monitoring are essential. Engineers often use vibration analysis and alignment tools to detect any signs of misalignment before they become critical issues. By addressing potential problems early on, they can avoid costly repairs and downtime. Additionally, ensuring that all components are adequately lubricated and free of debris can significantly reduce the risk of shaft skid occurring.Moreover, understanding the operating conditions of a machine is vital. Machines that operate under extreme temperatures or loads may be more susceptible to shaft skid. Therefore, engineers must design systems that can withstand these conditions while maintaining proper alignment. This involves selecting the right materials and components that can endure the stresses placed upon them.In conclusion, the term shaft skid encapsulates a critical aspect of machinery operation that demands attention from engineers and technicians alike. By recognizing the signs of shaft skid and implementing preventive measures, the longevity and reliability of machinery can be greatly enhanced. Ultimately, a thorough understanding of this phenomenon not only aids in effective maintenance practices but also contributes to the overall safety and efficiency of industrial operations. Thus, investing time and resources into understanding and preventing shaft skid is a worthwhile endeavor for anyone involved in the field of mechanical engineering.

在工程和机械领域，术语shaft skid指的是旋转机器的轴在操作过程中未能保持其预期位置的状态。这种现象可能导致各种操作问题，包括过度磨损、振动，甚至是相关机械的灾难性故障。理解shaft skid的含义对于负责维护旋转设备完整性和性能的工程师和技术人员至关重要。当一台机器运转时，其组件设计为协调工作。轴作为许多机器中的核心组件，必须平稳旋转并与其他部件保持对齐，以确保效率。然而，当发生shaft skid时，这表明轴已经偏离了其正确的对齐位置，通常是由于外力或内部故障引起的。这种不对齐可能是由于安装不当、缺乏润滑或随时间推移的磨损等因素造成的。shaft skid的后果可能是严重的。例如，如果轴未正确对齐，则可能导致机器内部力量分布不均。这种不均匀性可能导致摩擦和热量生成增加，从而进一步损害轴及周围组件。在某些情况下，机器可能会经历可以在整个结构中感受到的振动，发出紧急维护的信号。为了防止shaft skid，定期维护和监测至关重要。工程师通常使用振动分析和对齐工具来检测任何不对齐的迹象，以便在其成为关键问题之前加以解决。通过及早处理潜在问题，他们可以避免昂贵的维修和停机。此外，确保所有组件都得到充分润滑并且没有杂物，也可以显著降低发生shaft skid的风险。此外，了解机器的操作条件也至关重要。在极端温度或负载下运行的机器可能更容易发生shaft skid。因此，工程师必须设计能够承受这些条件的系统，同时保持适当的对齐。这涉及选择能够承受施加于其上的压力的合适材料和组件。总之，术语shaft skid概括了机械操作中的一个关键方面，要求工程师和技术人员给予关注。通过识别shaft skid的迹象并实施预防措施，可以大大增强机械的寿命和可靠性。最终，对这一现象的深入理解不仅有助于有效的维护实践，还有助于工业操作的整体安全性和效率。因此，投资时间和资源来理解和防止shaft skid是任何参与机械工程领域的人的值得追求的事业。