scupper valve

简明释义

排水口阀门

英英释义

例句

1.During heavy rain, the scupper valve ensures that excess water drains off quickly.

在大雨期间，排水阀确保多余的水能迅速排出。

2.The contractor installed a new scupper valve to improve drainage in the parking lot.

承包商安装了一个新的排水阀以改善停车场的排水。

3.A malfunctioning scupper valve can lead to flooding in the lower levels of the vessel.

故障的排水阀可能导致船只下层淹水。

4.Regular maintenance of the scupper valve is essential to ensure it functions properly.

定期维护排水阀对确保其正常工作至关重要。

5.The ship's design includes a reliable scupper valve to prevent water from accumulating on the deck.

这艘船的设计包括一个可靠的排水阀，以防止水在甲板上积聚。

作文

In the world of marine engineering, the term scupper valve refers to a device that plays a crucial role in managing water flow on boats and ships. These valves are specifically designed to allow water to drain out of the vessel while preventing any backflow from the sea or other bodies of water. Understanding the function and importance of the scupper valve is essential for anyone involved in maritime activities, whether they are engineers, boat owners, or enthusiasts.The primary purpose of a scupper valve is to ensure that excess water does not accumulate on the deck or in other areas of a ship. When a vessel is at sea, waves can cause water to splash onto the deck, and without proper drainage, this water could create hazardous conditions. The scupper valve allows this water to flow out, maintaining the safety and stability of the ship. This is particularly important during rough weather when waves are more likely to inundate the deck.Moreover, the design of the scupper valve is such that it opens to let water out but closes to prevent seawater from entering the vessel. This feature is vital for keeping the interior of the ship dry and preventing potential damage to cargo and equipment. In essence, the scupper valve acts as a one-way gate, ensuring that while water can escape, it cannot re-enter the vessel from the outside.The installation and maintenance of scupper valves are critical aspects of shipbuilding and marine maintenance. Engineers must carefully select the appropriate type of valve based on the specific needs of the vessel, including its size, purpose, and the typical conditions it will face at sea. Regular inspection and maintenance of these valves are necessary to ensure they function correctly, as any malfunction could lead to serious safety issues.In addition to their practical applications, scupper valves also play a role in environmental protection. By effectively managing water drainage, these valves help minimize the risk of pollution from bilge water or other contaminants that may be present on the deck. Properly functioning scupper valves contribute to cleaner oceans by preventing harmful substances from being discharged into the water.In conclusion, the scupper valve is a vital component in marine engineering that ensures the safety and efficiency of vessels at sea. Its ability to drain excess water while preventing backflow is essential for maintaining dry and stable conditions on board. As we continue to explore and utilize our oceans, understanding and properly maintaining scupper valves will remain a key factor in promoting safe and environmentally responsible maritime practices.

在海洋工程领域，术语scupper valve指的是一种在船只和舰艇上管理水流的重要装置。这些阀门专门设计用于允许水从船只中排出，同时防止海水或其他水体的回流。理解scupper valve的功能和重要性对于任何参与海事活动的人来说都是至关重要的，无论他们是工程师、船主还是爱好者。scupper valve的主要目的是确保多余的水不会在甲板或船只的其他区域积累。当船只在海上时，波浪可能会导致水溅到甲板上，如果没有适当的排水，这些水可能会造成危险的条件。scupper valve允许这些水流出，从而保持船只的安全和稳定。这在恶劣天气期间尤为重要，因为波浪更可能淹没甲板。此外，scupper valve的设计使其能够在排水时打开，但在防止海水进入船只时关闭。这一特性对于保持船内干燥并防止货物和设备潜在损坏至关重要。从本质上讲，scupper valve充当一个单向门，确保水可以流出，但无法从外部重新进入船只。安装和维护scupper valves是造船和海洋维护的重要方面。工程师必须根据船只的特定需求，包括其大小、用途以及在海上将面临的典型条件，仔细选择合适类型的阀门。定期检查和维护这些阀门是必要的，以确保它们正常工作，因为任何故障都可能导致严重的安全问题。除了实际应用外，scupper valves还在环境保护中发挥作用。通过有效管理水排放，这些阀门有助于最小化甲板上污水或其他污染物泄漏的风险。正常运作的scupper valves通过防止有害物质被排放到水中，有助于清洁海洋。总之，scupper valve是海洋工程中一个至关重要的组成部分，确保船只在海上的安全和效率。它排除多余水分的能力，同时防止回流，对于保持船上干燥和稳定的条件至关重要。随着我们继续探索和利用海洋，理解和正确维护scupper valves将始终是促进安全和环保海事实践的关键因素。