scantling length

简明释义

结构长度

英英释义

例句

1.The architect specified the scantling length to ensure the beams would support the structure adequately.

建筑师指定了scantling length以确保梁能够充分支撑结构。

2.During the inspection, the engineer measured the scantling length to verify compliance with safety standards.

在检查过程中，工程师测量了scantling length以验证是否符合安全标准。

3.In residential construction, the scantling length of floor joists is crucial for preventing sagging over time.

在住宅建筑中，地板托梁的scantling length对于防止随时间下垂至关重要。

4.The shipbuilder adjusted the scantling length to improve the vessel's stability in rough waters.

造船工人调整了scantling length以提高船只在波涛汹涌水域中的稳定性。

5.When calculating the load-bearing capacity, it's essential to know the scantling length of each timber piece.

在计算承载能力时，了解每块木材的scantling length至关重要。

作文

In the field of naval architecture and marine engineering, understanding the dimensions and specifications of a vessel is crucial for its design and construction. One important term that often arises in this context is scantling length. The term refers to the minimum dimensions or measurements of structural elements in a ship or boat, specifically focusing on the length of these elements. This is essential as it helps ensure that the vessel can withstand various forces and stresses during its operation at sea.When designing a ship, engineers must consider various factors such as weight, buoyancy, and stability. The scantling length plays a vital role in determining how much weight a specific part of the vessel can support without compromising its integrity. For instance, if the scantling lengths of the beams or frames are not appropriately calculated, it could lead to structural failures, which might result in catastrophic consequences.The calculation of scantling length involves various standards and regulations, including those set by organizations like the International Maritime Organization (IMO) and the American Bureau of Shipping (ABS). These guidelines provide engineers with formulas and criteria to calculate the appropriate scantlings based on the type of vessel, its intended use, and the environmental conditions it may encounter.Moreover, the scantling length is not just a technical specification; it also influences the overall performance and efficiency of the vessel. A well-designed ship with correctly calculated scantlings will have better stability, improved fuel efficiency, and enhanced safety features. Conversely, if the scantling lengths are too short, the vessel may face issues such as excessive flexing or even structural failure under heavy loads or rough sea conditions.Additionally, advancements in materials science have allowed for the development of stronger and lighter materials, which in turn affect the scantling length. Modern ships can utilize these new materials to reduce their weight while maintaining or even improving their structural integrity. This innovation has led to more efficient designs that can navigate through water with less resistance, ultimately benefiting the shipping industry by reducing operational costs.In conclusion, the concept of scantling length is fundamental in naval architecture and marine engineering. It encompasses the minimal dimensions required for the structural components of a vessel, ensuring safety and performance. Understanding this term allows engineers and designers to create vessels that not only meet regulatory standards but also operate efficiently and safely in various maritime environments. As technology continues to evolve, so too will the methods used to calculate and apply scantling length, paving the way for future advancements in ship design and construction.

在海洋建筑和海洋工程领域，理解船舶的尺寸和规格对于其设计和建造至关重要。一个经常出现的重要术语是scantling length。该术语指的是船舶或船只中结构元素的最小尺寸或测量，特别关注这些元素的长度。这一点至关重要，因为它有助于确保船舶在海上操作时能够承受各种力量和压力。在设计船舶时，工程师必须考虑各种因素，例如重量、浮力和稳定性。scantling length在确定船舶某一特定部分可以支持多少重量而不影响其完整性方面发挥着重要作用。例如，如果梁或框架的scantling length计算不当，可能会导致结构故障，从而造成灾难性的后果。scantling length的计算涉及多种标准和规定，包括国际海事组织（IMO）和美国船级社（ABS）等组织制定的标准。这些指导方针为工程师提供了公式和标准，以根据船舶类型、预期用途和可能遇到的环境条件计算适当的scantling length。此外，scantling length不仅仅是技术规格；它还影响船舶的整体性能和效率。经过精心设计的船舶如果有正确计算的scantling length，将具有更好的稳定性、提高的燃油效率和增强的安全特性。相反，如果scantling length过短，船舶可能面临过度弯曲甚至在重负荷或恶劣海况下发生结构故障的问题。此外，材料科学的进步使得开发出更强、更轻的材料成为可能，这反过来又影响了scantling length。现代船舶可以利用这些新材料，在保持或甚至改善其结构完整性的同时减少重量。这一创新导致了更加高效的设计，可以以更少的阻力在水中航行，最终通过降低运营成本使航运业受益。总之，scantling length的概念在海洋建筑和海洋工程中是基础性的。它涵盖了船舶结构组成部分所需的最小尺寸，确保安全和性能。理解这一术语使工程师和设计师能够创建不仅符合监管标准，而且在各种海洋环境中高效、安全运行的船舶。随着技术的不断发展，用于计算和应用scantling length的方法也将不断演变，为未来的船舶设计和建造铺平道路。