regulated take off weight

简明释义

额定起飞重量

英英释义

Regulated take-off weight refers to the maximum weight at which an aircraft is permitted to take off, as defined by aviation regulations and safety standards.

受规管的起飞重量是指根据航空法规和安全标准,飞机被允许起飞的最大重量。

例句

1.Before takeoff, the crew checks the regulated take off weight (规定起飞重量) against the actual weight.

起飞前,机组人员将实际重量与规定起飞重量进行核对。

2.The airline has strict policies regarding the regulated take off weight (规定起飞重量) for each flight.

航空公司对每个航班的规定起飞重量有严格的政策。

3.The aircraft's performance is optimized when it operates below the regulated take off weight (规定起飞重量).

当飞机在低于规定起飞重量时,其性能得到优化。

4.Pilots must ensure that the cargo does not exceed the regulated take off weight (规定起飞重量) to maintain safety.

飞行员必须确保货物不超过规定起飞重量以保持安全。

5.Exceeding the regulated take off weight (规定起飞重量) can lead to serious operational issues.

超出规定起飞重量可能会导致严重的操作问题。

作文

In the aviation industry, safety is paramount, and one of the critical factors that contribute to the safety of an aircraft is its weight. The term regulated take off weight refers to the maximum weight at which an aircraft is allowed to take off, as determined by regulatory authorities. This weight limit is crucial for ensuring that the aircraft can achieve the necessary lift and maintain stability during flight. Understanding the implications of regulated take off weight is essential for pilots, engineers, and airline operators alike.The concept of regulated take off weight encompasses various factors, including the aircraft's design, the type of cargo it carries, and environmental conditions such as altitude and temperature. Each aircraft model has a specific regulated take off weight, which is determined through rigorous testing and certification processes. For instance, larger commercial airliners generally have higher weight limits compared to smaller regional jets, allowing them to carry more passengers and cargo.When planning a flight, pilots must consider the regulated take off weight to ensure compliance with safety regulations. Exceeding this weight can lead to serious consequences, including reduced performance during takeoff and increased risk of accidents. Therefore, before each flight, pilots perform a weight and balance calculation to verify that the total weight of the aircraft, including passengers, cargo, and fuel, does not exceed the regulated take off weight. This calculation is vital for maintaining the aircraft's center of gravity within safe limits, which directly affects its handling characteristics.Moreover, the regulated take off weight is influenced by the aircraft's configuration and operational parameters. For example, if an aircraft is flying from a high-altitude airport, the thinner air may require a lower weight limit for takeoff compared to operations from sea-level airports. Pilots must be aware of these variations and adjust their load accordingly to adhere to the regulated take off weight.In addition to safety considerations, understanding the regulated take off weight also has economic implications for airlines. Airlines strive to optimize their payloads to maximize revenue while ensuring compliance with safety regulations. By carefully managing the weight of their aircraft, airlines can improve fuel efficiency and reduce operational costs. This aspect of weight management is particularly important in a competitive market where profit margins are often tight.In conclusion, the term regulated take off weight plays a significant role in aviation safety and operational efficiency. It is a critical parameter that influences flight operations, aircraft design, and airline profitability. Both pilots and airline operators must have a comprehensive understanding of the regulated take off weight to ensure safe and efficient air travel. As the aviation industry continues to evolve, ongoing research and advancements in technology will likely lead to new insights into weight management and its impact on flight safety and performance. Therefore, staying informed about the regulated take off weight and its implications is essential for all stakeholders in the aviation sector.

在航空行业,安全至关重要,而影响飞机安全的关键因素之一就是重量。术语受管制起飞重量指的是根据监管机构的规定,飞机允许起飞的最大重量。这个重量限制对于确保飞机能够获得必要的升力并在飞行中保持稳定至关重要。理解受管制起飞重量的含义对飞行员、工程师和航空公司运营商都至关重要。受管制起飞重量的概念包含多种因素,包括飞机的设计、所搭载货物的类型以及环境条件,如海拔和温度。每种飞机型号都有一个特定的受管制起飞重量,这个重量是通过严格的测试和认证过程确定的。例如,较大的商业客机通常比较小的区域喷气机具有更高的重量限制,使其能够携带更多的乘客和货物。在规划飞行时,飞行员必须考虑受管制起飞重量以确保遵守安全法规。超出这个重量可能导致严重后果,包括在起飞时性能下降和事故风险增加。因此,在每次飞行之前,飞行员都会进行重量和平衡计算,以验证飞机的总重量,包括乘客、货物和燃料,不超过受管制起飞重量。这个计算对于保持飞机重心在安全范围内至关重要,这直接影响到飞机的操控特性。此外,受管制起飞重量还受到飞机配置和操作参数的影响。例如,如果飞机从高海拔机场起飞,稀薄的空气可能要求起飞时的重量限制低于从海平面机场起飞的要求。飞行员必须了解这些变化,并相应调整负载,以遵守受管制起飞重量。除了安全考虑之外,理解受管制起飞重量对航空公司的经济影响也很重要。航空公司努力优化其有效载荷,以在确保遵守安全法规的同时最大化收入。通过仔细管理飞机的重量,航空公司可以提高燃油效率并降低运营成本。这一重量管理方面在竞争激烈的市场中尤为重要,因为利润空间往往很小。总之,术语受管制起飞重量在航空安全和运营效率中扮演着重要角色。它是影响飞行操作、飞机设计和航空公司盈利能力的关键参数。飞行员和航空公司运营商必须全面理解受管制起飞重量,以确保安全和高效的航空旅行。随着航空行业的不断发展,关于重量管理及其对飞行安全和性能影响的新研究和技术进步可能会不断涌现。因此,了解受管制起飞重量及其影响对航空领域所有利益相关者来说都是至关重要的。

相关单词

regulated

regulated详解:怎么读、什么意思、用法

off

off详解:怎么读、什么意思、用法