ratio of deck opening area

简明释义

甲板开口度

英英释义

例句

1.During the inspection, the ratio of deck opening area was found to be below the recommended standards.

在检查中，发现甲板开口面积的比例低于推荐标准。

2.The engineer calculated the ratio of deck opening area to ensure proper ventilation in the ship's design.

工程师计算了甲板开口面积的比例以确保船舶设计中的通风良好。

3.To enhance the performance of the vessel, we need to adjust the ratio of deck opening area accordingly.

为了提高船只的性能，我们需要相应地调整甲板开口面积的比例。

4.A higher ratio of deck opening area can improve airflow but may compromise structural integrity.

更高的甲板开口面积的比例可以改善气流，但可能会影响结构完整性。

5.The designer aimed for an optimal ratio of deck opening area to balance safety and efficiency.

设计师旨在达到最佳的甲板开口面积的比例以平衡安全性和效率。

作文

In the realm of naval architecture and marine engineering, various parameters are crucial for ensuring the safety and efficiency of vessels. One such critical parameter is the ratio of deck opening area, which plays a significant role in determining a ship's stability and seaworthiness. The ratio of deck opening area refers to the proportion of the total deck area that is occupied by openings, such as hatches, vents, and other structures that allow for air and light to enter the vessel. Understanding this ratio is essential for designers and engineers, as it directly impacts the ship’s ability to manage water ingress, ventilation, and overall structural integrity.When designing a vessel, engineers must carefully consider the ratio of deck opening area to ensure that it meets regulatory requirements and safety standards. A higher ratio may allow for better ventilation and natural light within the ship, which is particularly important for crew comfort and operational efficiency. However, an excessive ratio of deck opening area can compromise the vessel’s strength and stability, especially in rough seas where water can enter through these openings.Moreover, the ratio of deck opening area is not only about the physical dimensions of the openings but also about their placement and orientation. For instance, openings located on the upper deck may be more susceptible to wave action than those positioned lower down. Therefore, naval architects must strike a balance between providing adequate openings for ventilation and light while maintaining the vessel's overall stability and safety.The importance of the ratio of deck opening area extends beyond just the design phase. During the operational life of a vessel, this ratio can influence maintenance practices and emergency procedures. For example, if the openings are not adequately sealed or maintained, they can become points of vulnerability during heavy weather conditions, leading to potential flooding or loss of cargo.Furthermore, the ratio of deck opening area can affect the ship's performance in terms of fuel efficiency. A well-balanced design that optimizes this ratio can contribute to reduced drag and improved speed, ultimately leading to lower fuel consumption. This aspect is increasingly important in today’s environmentally conscious world, where the maritime industry is under pressure to reduce its carbon footprint.In conclusion, the ratio of deck opening area is a fundamental concept in naval architecture that influences various aspects of a vessel's design, safety, and performance. By understanding and optimizing this ratio, engineers and designers can create ships that are not only safe and efficient but also comfortable for the crew. As technology advances and new materials and methods are developed, the significance of the ratio of deck opening area will continue to evolve, underscoring the need for ongoing research and innovation in the field of marine engineering.

在海军建筑和海洋工程领域，各种参数对于确保船舶的安全性和效率至关重要。其中一个关键参数是甲板开口面积比，它在决定船舶的稳定性和适航性方面发挥着重要作用。甲板开口面积比指的是占据总甲板面积的开口（如舱口、通风口和其他允许空气和光线进入船舶的结构）的比例。理解这个比率对设计师和工程师至关重要，因为它直接影响到船舶管理进水、通风和整体结构完整性的能力。在设计船舶时，工程师必须仔细考虑甲板开口面积比，以确保其符合监管要求和安全标准。较高的比例可能允许更好的通风和自然采光，这对于船员的舒适度和操作效率尤为重要。然而，过高的甲板开口面积比可能会危及船舶的强度和稳定性，特别是在波涛汹涌的海域，水可能会通过这些开口进入。此外，甲板开口面积比不仅仅关乎开口的物理尺寸，还与其位置和方向有关。例如，位于上层甲板的开口可能比位于下层甲板的开口更容易受到波浪的影响。因此，海军建筑师必须在提供足够的通风和采光开口与保持船舶整体稳定性和安全性之间取得平衡。甲板开口面积比的重要性不仅体现在设计阶段。在船舶的运营生命周期中，这个比率可以影响维护实践和紧急程序。例如，如果开口没有得到适当密封或维护，它们可能在恶劣天气条件下成为脆弱点，导致潜在的进水或货物损失。此外，甲板开口面积比还可以影响船舶的燃料效率。优化该比率的良好平衡设计可以减少阻力，提高速度，最终降低燃料消耗。在当今环保意识日益增强的世界中，海事行业面临着减少碳足迹的压力，这一点尤为重要。总之，甲板开口面积比是海军建筑中一个基本概念，影响着船舶设计、安全性和性能的各个方面。通过理解和优化这一比率，工程师和设计师可以创造出不仅安全高效，而且船员舒适的船舶。随着技术的进步和新材料、新方法的发展，甲板开口面积比的重要性将继续演变，强调了海洋工程领域持续研究和创新的必要性。