pipe choking

简明释义

管子阻塞

英英释义

例句

1.The plumber recommended a cleaning solution to clear the pipe choking.

水管工推荐了一种清洁剂来清除管道堵塞。

2.The factory had to shut down production because of severe pipe choking in the drainage system.

由于排水系统严重的管道堵塞，工厂不得不停止生产。

3.The technician noticed that the water flow was reduced due to pipe choking.

技术人员注意到，由于管道堵塞，水流减少。

4.Using the right filters can help reduce pipe choking in aquariums.

使用合适的过滤器可以帮助减少水族箱中的管道堵塞。

5.Regular maintenance can prevent pipe choking in plumbing systems.

定期维护可以防止管道系统中的管道堵塞。

作文

In the world of plumbing and fluid dynamics, the term pipe choking refers to a phenomenon where the flow of fluid through a pipe is restricted or obstructed, often leading to a significant drop in pressure. This can occur for various reasons, such as the accumulation of debris, corrosion of the pipe walls, or even the design of the piping system itself. Understanding pipe choking is crucial for engineers and maintenance professionals, as it directly impacts the efficiency and safety of fluid transport systems.When a pipe experiences pipe choking, it can lead to several adverse effects. For one, the reduced flow rate can cause delays in processes that depend on a steady supply of fluid. In industrial settings, this might mean slower production times or increased operational costs due to the need for additional pumping power. Furthermore, if left unaddressed, pipe choking can result in more severe issues, such as pipe bursts or leaks, which can be costly to repair and hazardous to the environment.To mitigate the risks associated with pipe choking, regular maintenance and inspection of piping systems are essential. This includes cleaning out pipes to remove any buildup of sediments or other materials that could obstruct flow. Additionally, engineers may employ advanced modeling techniques to predict areas prone to pipe choking, allowing for preemptive measures to be taken before problems arise.Moreover, the design of the piping system plays a vital role in preventing pipe choking. By ensuring that pipes are appropriately sized for the intended flow rates and that the layout minimizes sharp bends and turns, the likelihood of flow obstruction can be significantly reduced. Engineers must also consider the type of fluid being transported, as different fluids have varying viscosities and flow characteristics that can influence the potential for pipe choking.In conclusion, pipe choking is a critical concept in the field of fluid dynamics and plumbing that requires careful consideration and management. By understanding its causes and consequences, professionals can take proactive steps to ensure the smooth operation of fluid transport systems, ultimately saving time and resources while maintaining safety standards. As technology advances, the ability to monitor and predict pipe choking will only improve, leading to more efficient and reliable systems in the future.

在管道和流体动力学的世界中，短语pipe choking指的是流体通过管道时受到限制或阻碍的现象，这通常会导致压力显著下降。这种情况可能由于多种原因引起，例如杂物积聚、管道壁腐蚀，甚至是管道系统本身的设计。理解pipe choking对工程师和维护专业人员至关重要，因为它直接影响流体运输系统的效率和安全性。当管道发生pipe choking时，会导致几种不利影响。首先，流量减少可能导致依赖稳定流体供应的过程出现延误。在工业环境中，这可能意味着生产时间变慢或由于需要额外的泵送功率而增加运营成本。此外，如果不加以解决，pipe choking可能导致更严重的问题，例如管道破裂或泄漏，这将造成昂贵的修复费用并对环境造成危害。为了减轻与pipe choking相关的风险，定期维护和检查管道系统至关重要。这包括清理管道，以去除任何可能阻碍流动的沉积物或其他材料。此外，工程师还可以采用先进的建模技术来预测容易发生pipe choking的区域，从而在问题出现之前采取预防措施。此外，管道系统的设计在防止pipe choking方面也发挥着至关重要的作用。通过确保管道的尺寸适合预期的流量，并且布局尽量减少急弯和转弯，可以显著降低流动阻碍的可能性。工程师还必须考虑输送流体的类型，因为不同的流体具有不同的粘度和流动特性，这可能影响pipe choking的潜在性。总之，pipe choking是在流体动力学和管道领域中的一个关键概念，需要仔细考虑和管理。通过理解其原因和后果，专业人员可以采取积极措施，确保流体运输系统的顺利运行，最终节省时间和资源，同时保持安全标准。随着技术的进步，监测和预测pipe choking的能力只会提高，从而在未来实现更高效和可靠的系统。