prefabricated section

简明释义

预装配分段

英英释义

例句

1.Each prefabricated section was delivered on-site for easy assembly.

每个预制部分都被送到现场以便于组装。

2.The company specializes in creating prefabricated sections for modular homes.

该公司专注于为模块化住宅制造预制部分。

3.The architect designed the house with multiple prefabricated sections for efficiency.

建筑师设计的房子采用多个预制部分以提高效率。

4.Using prefabricated sections can significantly reduce construction waste.

使用预制部分可以显著减少建筑废料。

5.The construction team used a prefabricated section to speed up the building process.

建筑团队使用了一个预制部分来加快建筑进程。

作文

In recent years, the construction industry has seen a significant shift towards more efficient building methods. One of the most innovative approaches that has gained popularity is the use of prefabricated section. A prefabricated section refers to components of a structure that are manufactured in a factory setting and then transported to the construction site for assembly. This method contrasts sharply with traditional construction techniques, where materials are often cut and assembled on-site. The rise of prefabricated sections has transformed how we think about building, offering numerous advantages that address some of the industry's most pressing challenges.One of the primary benefits of using prefabricated sections is efficiency. By manufacturing components in a controlled environment, builders can significantly reduce the time required for construction. For example, while traditional methods may take weeks or even months to complete the framing of a house, using prefabricated sections can cut that time down to mere days. This not only accelerates project timelines but also allows for better planning and resource allocation.Cost-effectiveness is another advantage of prefabricated sections. Because these components are produced in bulk, manufacturers can often offer lower prices than if each piece were custom-made on-site. Additionally, the reduction in labor costs associated with faster assembly times can lead to significant savings for both contractors and homeowners. In an era where budget constraints are common, the appeal of prefabricated sections cannot be overstated.Quality control is also enhanced when using prefabricated sections. Factory conditions allow for rigorous testing and inspection of materials before they leave the production facility. This means that the components used in a building are often of higher quality than those sourced from various suppliers on a construction site. Moreover, since the manufacturing process is standardized, there is less room for human error, resulting in a more reliable finished product.Sustainability is becoming an increasingly important consideration in construction, and prefabricated sections align well with this goal. The controlled factory environment reduces waste generated during the construction process, as materials can be precisely measured and cut. Furthermore, many manufacturers are now focusing on eco-friendly materials and processes, making prefabricated sections a greener choice for building. As society becomes more conscious of environmental impact, the demand for sustainable building practices is likely to grow.However, it is essential to acknowledge some challenges associated with prefabricated sections. One of the main concerns is the transportation of these large components to the construction site, which can sometimes be logistically complex and expensive. Additionally, while the initial setup costs may be lower, the design flexibility might be limited compared to traditional construction methods. Customization options can be restricted, leading to potential compromises on architectural vision.Despite these challenges, the advantages of prefabricated sections are compelling enough that many in the industry believe they represent the future of construction. As technology continues to advance, it is likely that we will see even more innovative uses for prefabricated sections, further streamlining the building process and making it more accessible to a broader audience. In conclusion, the use of prefabricated sections is not just a trend; it is a significant evolution in how we approach construction, promising a more efficient, cost-effective, and sustainable future for the industry.

近年来，建筑行业经历了向更高效的建筑方法显著转变。其中一种备受欢迎的创新方法是使用预制部分。预制部分是指在工厂环境中制造的建筑结构组件，然后运输到施工现场进行组装。这种方法与传统的建筑技术形成鲜明对比，后者通常是在现场切割和组装材料。预制部分的兴起改变了我们对建筑的思考，提供了许多优势，解决了行业中一些最紧迫的挑战。使用预制部分的主要好处之一是效率。通过在受控环境中制造组件，建筑商可以显著减少建设所需的时间。例如，虽然传统方法可能需要数周或甚至数月才能完成房屋的框架，但使用预制部分可以将这一时间缩短到仅几天。这不仅加快了项目时间表，还允许更好的规划和资源分配。成本效益是预制部分的另一个优势。由于这些组件是批量生产的，制造商通常可以提供比在现场定制制作每个部件更低的价格。此外，与更快的组装时间相关的劳动力成本降低可能会为承包商和房主带来显著的节省。在预算限制普遍存在的时代，预制部分的吸引力不容小觑。使用预制部分时，质量控制也得到了增强。工厂条件允许在组件离开生产设施之前进行严格的测试和检查。这意味着用于建筑的组件往往比从施工现场各种供应商那里采购的材料质量更高。此外，由于制造过程是标准化的，人为错误的余地更小，从而导致更可靠的成品。可持续性在建筑中变得越来越重要，而预制部分与这一目标高度契合。受控的工厂环境减少了建筑过程中产生的废物，因为材料可以精确测量和切割。此外，许多制造商现在专注于环保材料和工艺，使得预制部分成为一种更环保的建筑选择。随着社会对环境影响的关注度提高，对可持续建筑实践的需求可能会增长。然而，必须承认与预制部分相关的一些挑战。其中一个主要问题是将这些大型组件运输到施工现场，有时可能在物流上复杂且昂贵。此外，尽管初始设置成本可能较低，但与传统建筑方法相比，设计灵活性可能受到限制。定制选项可能受到限制，导致在建筑愿景上可能妥协。尽管面临这些挑战，预制部分的优势足够引人注目，以至于许多业内人士相信它们代表了建筑的未来。随着技术的不断进步，我们可能会看到更多创新的预制部分应用，进一步简化建筑过程，使其对更广泛的受众更加可及。总之，使用预制部分不仅仅是一种趋势；它是我们接近建筑的一次重大演变，承诺为行业带来更高效、经济和可持续的未来。