permissible length of compartment

简明释义

许可舱长

英英释义

例句

1.In the design phase, we must adhere to the permissible length of compartment outlined in the regulations.

在设计阶段，我们必须遵守法规中规定的隔间的允许长度。

2.The engineer specified the permissible length of compartment to ensure safety during construction.

工程师指定了隔间的允许长度以确保施工安全。

3.During the inspection, the inspector checked if the permissible length of compartment was followed.

在检查过程中，检查员检查了是否遵循了隔间的允许长度。

4.To comply with safety standards, we need to measure the permissible length of compartment accurately.

为了遵守安全标准，我们需要准确测量隔间的允许长度。

5.The architect calculated the permissible length of compartment to maximize space without compromising structural integrity.

建筑师计算了隔间的允许长度，以最大化空间而不影响结构完整性。

作文

In the field of architecture and engineering, understanding the concept of the permissible length of compartment is crucial for creating safe and functional spaces. The permissible length of compartment refers to the maximum allowable distance that a compartment can extend, particularly in buildings designed for public use. This measurement is not arbitrary; it is based on various safety regulations and standards that aim to protect occupants in case of emergencies, such as fire or structural failure. When designing a building, architects must consider several factors that influence the permissible length of compartment. First and foremost, the intended use of the space plays a significant role. For instance, a commercial building with high foot traffic may have stricter limitations compared to a residential property. Additionally, the materials used in construction, the presence of fire suppression systems, and the overall layout of the building all contribute to determining the permissible length of compartment. One of the primary reasons for establishing a permissible length of compartment is to ensure that smoke and heat from a fire do not spread too quickly throughout a building. By limiting the length of compartments, designers can create barriers that slow down the movement of smoke and flames, allowing occupants more time to evacuate safely. This is particularly important in high-rise buildings, where the potential for rapid fire spread poses a significant risk. Moreover, the permissible length of compartment is also related to the accessibility of emergency services. In the event of a fire, firefighters need to navigate through the building efficiently to reach those in need. If compartments are too long, it may hinder their ability to respond quickly, potentially putting lives at risk. Therefore, adhering to the established guidelines regarding the permissible length of compartment not only enhances safety for occupants but also facilitates effective rescue operations. In addition to safety concerns, the permissible length of compartment can also impact the overall design and functionality of a space. Architects often strive to create open and inviting environments, but they must balance this desire with the need for safety. As a result, understanding the permissible length of compartment allows architects to innovate within the constraints imposed by regulations. They can explore creative solutions, such as incorporating natural light and ventilation while still maintaining compliance with safety standards. In conclusion, the permissible length of compartment is a vital concept in building design that addresses safety, accessibility, and functionality. By adhering to these guidelines, architects and engineers can create spaces that not only meet regulatory requirements but also enhance the overall experience for occupants. As we continue to develop our cities and communities, it is essential to prioritize safety and efficiency, ensuring that the permissible length of compartment is carefully considered in every project. Through this understanding, we can build a safer future for all.

在建筑和工程领域，理解“可允许的隔间长度”这一概念对于创造安全和功能性空间至关重要。“可允许的隔间长度”指的是隔间可以延伸的最大允许距离，特别是在为公共使用而设计的建筑中。这个测量不是任意的；它基于各种安全法规和标准，旨在保护居民在紧急情况下（如火灾或结构故障）的人身安全。在设计建筑时，建筑师必须考虑几个影响“可允许的隔间长度”的因素。首先，空间的预期用途起着重要作用。例如，商业建筑的客流量较大，可能会有比住宅物业更严格的限制。此外，建筑中使用的材料、灭火系统的存在以及建筑的整体布局都对确定“可允许的隔间长度”产生影响。设定“可允许的隔间长度”的主要原因之一是确保火灾中的烟雾和热量不会过快地传播到整个建筑中。通过限制隔间的长度，设计师可以创建减缓烟雾和火焰传播的障碍，使居民有更多时间安全撤离。这一点在高层建筑中特别重要，因为火灾迅速蔓延的潜在风险相当大。此外，“可允许的隔间长度”也与紧急服务的可及性有关。在火灾发生时，消防员需要高效地穿越建筑以到达需要帮助的人。如果隔间过长，可能会妨碍他们快速反应，潜在地危及生命。因此，遵循关于“可允许的隔间长度”的既定准则不仅提升了居民的安全性，还促进了有效的救援行动。除了安全问题，“可允许的隔间长度”还会影响空间的整体设计和功能性。建筑师通常努力创造开放和宜人的环境，但他们必须在这种愿望与安全需求之间找到平衡。因此，理解“可允许的隔间长度”使建筑师能够在法规施加的限制内进行创新。他们可以探索创造性的解决方案，例如在保持安全标准合规的同时融入自然光和通风。总之，“可允许的隔间长度”是建筑设计中的一个重要概念，涉及安全性、可及性和功能性。通过遵循这些指导方针，建筑师和工程师可以创造出不仅符合监管要求，而且增强居民整体体验的空间。随着我们继续发展城市和社区，优先考虑安全和效率至关重要，确保在每个项目中都仔细考虑“可允许的隔间长度”。通过这种理解，我们可以为所有人建设一个更安全的未来。