Panama Canal chock

简明释义

闭式导缆孔

英英释义

例句

1.The engineers examined the Panama Canal chock after the vessel's journey.

在船只航行后，工程师们检查了巴拿马运河楔块。

2.The ship was carefully maneuvered into position to align with the Panama Canal chock.

船只小心翼翼地调整位置，以与巴拿马运河楔块对齐。

3.The captain communicated with the pilot about the placement of the Panama Canal chock.

船长与引航员沟通了巴拿马运河楔块的放置情况。

4.Proper alignment with the Panama Canal chock is crucial for safe passage.

与巴拿马运河楔块正确对齐对于安全通行至关重要。

5.During the transit, the crew checked the Panama Canal chock for any signs of wear.

在航行过程中，船员检查了巴拿马运河楔块是否有磨损迹象。

作文

The Panama Canal is one of the most significant engineering feats in history, allowing ships to traverse between the Atlantic and Pacific Oceans without the long and perilous journey around the southern tip of South America. One of the critical components of the canal's operation is the use of a device known as a Panama Canal chock. This device plays a vital role in ensuring the safe passage of vessels through the canal's locks. A Panama Canal chock is essentially a type of mooring equipment that helps to secure ships as they enter or exit the locks. The chocks are strategically placed along the lock walls and provide a point for the ship’s lines to be tied off, ensuring that the vessel remains stable and does not drift during the locking process. This is particularly important given the large size of many vessels that transit the canal, which can create significant forces against the lock walls. Understanding the function of the Panama Canal chock requires a bit of knowledge about how the locks operate. Each lock chamber fills and empties with water to raise or lower ships to the appropriate level. As the water levels change, the forces acting on the ships can vary dramatically. Without proper mooring equipment like the chocks, there would be a risk of the vessels colliding with the lock walls or even damaging the structure itself. The design of the Panama Canal chock has evolved over the years to accommodate the increasing size of modern ships. Originally, the canal was designed for smaller vessels, but as maritime trade grew, so did the size of the ships. The chocks had to be reinforced and redesigned to handle the larger vessels that now frequent the canal. This ongoing evolution reflects the adaptability of the Panama Canal to meet the demands of global shipping. In addition to their practical function, Panama Canal chocks also represent an aspect of the canal's rich history. The construction of the canal was a monumental task that involved overcoming numerous engineering challenges, including the need for effective mooring solutions. The chocks are a testament to the ingenuity and foresight of the engineers who designed the canal. Furthermore, the significance of the Panama Canal chock extends beyond just its physical presence in the canal. It symbolizes the interconnectedness of global trade and the importance of efficient maritime routes. The ability of ships to pass through the canal quickly and safely has had profound economic implications, facilitating trade between countries and reducing shipping times. In conclusion, the Panama Canal chock is a small yet essential component of the Panama Canal's operation. Its role in securing vessels during transit is crucial for maintaining the safety and efficiency of one of the world's most important waterways. As the canal continues to serve as a key transit point for international shipping, the significance of the chocks will remain, highlighting the intricate balance of engineering, commerce, and history that defines the Panama Canal.

巴拿马运河是历史上最重要的工程壮举之一，使船只能够在大西洋和太平洋之间穿行，而无需绕过南美洲南端漫长而危险的航程。运河运营中的一个关键组成部分是称为巴拿马运河楔块的设备。该设备在确保船只安全通过运河闸门方面发挥着至关重要的作用。巴拿马运河楔块本质上是一种系缆设备，帮助固定船只在进入或离开闸门时。楔块被战略性地放置在闸门墙上，为船只的缆绳提供了一个系留点，确保船只保持稳定，不会在锁定过程中漂移。这一点尤为重要，因为许多通过运河的船只体积庞大，可能会对闸门墙产生显著的力量。理解巴拿马运河楔块的功能需要对闸门的操作有一定的了解。每个闸室通过注水和排水来升高或降低船只到适当的水位。随着水位的变化，施加在船只上的力量可能会剧烈变化。如果没有像楔块这样的适当系缆设备，船只就可能与闸门墙发生碰撞，甚至损坏结构本身。巴拿马运河楔块的设计多年来不断演变，以适应现代船只日益增大的规模。最初，运河是为较小的船只设计的，但随着海洋贸易的增长，船只的尺寸也随之增加。楔块必须得到加固和重新设计，以处理现在频繁经过运河的大型船只。这种持续的演变反映了巴拿马运河适应全球航运需求的能力。除了它们的实际功能外，巴拿马运河楔块还代表了运河丰富历史的一个方面。运河的建设是一项宏伟的任务，涉及克服众多工程挑战，包括有效的系缆解决方案的需求。楔块见证了设计运河的工程师们的聪明才智和远见。此外，巴拿马运河楔块的重要性超出了它在运河中的物理存在。它象征着全球贸易的相互联系以及高效海上航线的重要性。船只能够快速安全地通过运河的能力对经济产生了深远的影响，促进了国家之间的贸易并缩短了运输时间。总之，巴拿马运河楔块是巴拿马运河运营中一个小但至关重要的组成部分。它在运输过程中固定船只的角色对于维护世界上最重要水道之一的安全性和效率至关重要。随着运河继续作为国际航运的关键通道，楔块的重要性将持续存在，突显出定义巴拿马运河的工程、商业和历史之间复杂平衡。