outside diameter of cable

简明释义

电缆外径

英英释义

例句

1.To avoid signal loss, the outside diameter of cable should match the specifications.

为了避免信号损失，电缆的外径应符合规格要求。

2.The technician measured the outside diameter of cable to ensure it fits the conduit properly.

技术员测量了电缆的外径以确保它能适合导管。

3.When selecting a cable, consider the outside diameter of cable for compatibility with connectors.

在选择电缆时，考虑电缆的外径以确保与连接器兼容。

4.The manufacturer specifies the outside diameter of cable in the product datasheet.

制造商在产品数据表中指定了电缆的外径。

5.We need to check the outside diameter of cable before installation to prevent any issues.

在安装之前，我们需要检查电缆的外径以防止出现任何问题。

作文

When discussing electrical engineering and telecommunications, one often encounters the term outside diameter of cable. This term refers to the overall width of a cable measured from its outermost edges. Understanding the outside diameter of cable is crucial for several reasons, particularly in the fields of installation, compatibility, and safety. Firstly, the outside diameter of cable plays a significant role in determining how a cable can be installed. In many cases, cables need to fit through conduits or other types of protective tubing. If the outside diameter of cable exceeds the inner diameter of the conduit, installation becomes impossible without damaging either the cable or the conduit. Therefore, engineers must carefully consider this measurement when designing systems that require multiple cables to run together. Moreover, the outside diameter of cable is essential for ensuring compatibility with connectors and other equipment. Different devices are designed to accommodate specific sizes of cables. For instance, if a technician tries to connect a cable with a larger outside diameter of cable than the device’s input can handle, they may encounter issues such as poor connections or complete failure of the equipment. This highlights the importance of not only measuring the cable’s diameter but also understanding the specifications of the devices to which the cables will be connected. In addition to installation and compatibility, the outside diameter of cable also has implications for safety. Cables that are too thick may not be able to bend or flex properly, leading to potential hazards such as overheating or short circuits. Therefore, it is vital for engineers and technicians to select cables with appropriate outside diameter of cable measurements to ensure safe operation under various conditions. Furthermore, when planning installations, the outside diameter of cable can impact the overall aesthetics of a project. For example, in residential settings where cables are visible, a slimmer cable might be preferred for aesthetic reasons. In contrast, industrial applications may prioritize durability and robustness over appearance, leading to the selection of cables with larger diameters. Additionally, the outside diameter of cable can affect the overall performance of a system. Larger cables can carry more current, which is beneficial for high-power applications. However, they may also be heavier and more difficult to manage. On the other hand, smaller cables might be easier to handle but could limit the amount of power transmitted. As such, engineers must strike a balance between the outside diameter of cable and the operational requirements of the system. In conclusion, the outside diameter of cable is a critical measurement that influences various aspects of cable usage in electrical and telecommunications engineering. From installation and compatibility to safety and aesthetics, understanding this term is essential for anyone involved in these fields. By paying attention to the outside diameter of cable, professionals can ensure they choose the right cables for their applications, leading to safer and more efficient systems.

在讨论电气工程和电信时，常常会遇到“电缆外径”这个术语。这个术语指的是从电缆最外边缘测量的整体宽度。理解电缆外径对于多个原因至关重要，特别是在安装、兼容性和安全领域。首先，电缆外径在确定电缆如何安装方面发挥着重要作用。在许多情况下，电缆需要通过导管或其他类型的保护管道。如果电缆外径超过导管的内径，则在不损坏电缆或导管的情况下进行安装几乎是不可能的。因此，工程师在设计需要一起运行多个电缆的系统时，必须仔细考虑这一测量。 此外，电缆外径对于确保与连接器和其他设备的兼容性也至关重要。不同的设备设计用于适应特定尺寸的电缆。例如，如果技术人员尝试连接一个外径比设备输入能处理的要大的电缆，他们可能会遇到连接不良或设备完全失效等问题。这突显了不仅要测量电缆直径，还要了解将要连接的设备的规格的重要性。 除了安装和兼容性之外，电缆外径还对安全有影响。过厚的电缆可能无法正确弯曲或灵活，导致潜在的危险，例如过热或短路。因此，对于工程师和技术人员来说，选择合适的电缆外径测量以确保在各种条件下安全操作至关重要。 此外，在规划安装时，电缆外径可以影响项目的整体美观。例如，在电缆可见的住宅环境中，可能更喜欢较细的电缆出于美观原因。相反，工业应用可能优先考虑耐用性和坚固性，而非外观，导致选择直径较大的电缆。此外，电缆外径还会影响系统的整体性能。较大的电缆可以承载更多电流，这对高功率应用是有利的。然而，它们也可能更重且更难管理。另一方面，较小的电缆可能更易于处理，但可能限制传输的功率。因此，工程师必须在电缆外径和系统的操作要求之间取得平衡。 总之，电缆外径是一个关键的测量，它影响电气和电信工程中电缆使用的各个方面。从安装和兼容性到安全性和美观性，理解这个术语对于任何参与这些领域的人都是必不可少的。通过关注电缆外径，专业人士可以确保他们为其应用选择合适的电缆，从而导致更安全、更高效的系统。