outboard discharge valve

简明释义

通海排出阀

英英释义

例句

1.During the maintenance check, we found that the outboard discharge valve was leaking.

在维护检查中，我们发现舷外排放阀有泄漏。

2.The outboard discharge valve is crucial for the efficient operation of the boat's drainage system.

舷外排放阀对船只排水系统的高效运作至关重要。

3.After replacing the old outboard discharge valve, the water flow improved significantly.

更换旧的舷外排放阀后，水流明显改善。

4.The technician inspected the outboard discharge valve to ensure it was functioning correctly.

技术人员检查了舷外排放阀以确保其正常工作。

5.To prevent backflow, make sure the outboard discharge valve is properly sealed.

为了防止回流，确保舷外排放阀密封良好。

作文

In the realm of marine engineering, various components play crucial roles in ensuring the proper functioning of watercraft. One such component is the outboard discharge valve, which serves a vital function in managing the flow of fluids in and out of a vessel. Understanding the significance of this component can provide insights into the intricate systems that keep boats operational and safe. The outboard discharge valve is primarily used in outboard motors, which are mounted on the exterior of a boat. This type of valve allows for the controlled release of water or other fluids from the engine compartment, helping to maintain optimal performance and prevent overheating. When an outboard motor operates, it generates heat as a byproduct of combustion. To counteract this heat, water is drawn in and circulated through the engine to cool it down. However, once the cooling process is complete, the excess water needs to be expelled efficiently. This is where the outboard discharge valve comes into play.The design of the outboard discharge valve is critical for its functionality. It typically consists of a mechanism that opens and closes based on pressure changes within the system. When the pressure builds up due to the influx of water, the valve opens, allowing the heated water to be discharged back into the sea. Conversely, when the pressure decreases, the valve closes to prevent any backflow. This dynamic operation ensures that the engine remains at a safe temperature, thereby prolonging its lifespan and enhancing performance.Moreover, the outboard discharge valve also plays a role in environmental protection. By ensuring that only the necessary amount of water is discharged, it helps prevent pollution and minimizes the impact on aquatic ecosystems. If the valve malfunctions, it could lead to excessive discharge, which might introduce harmful substances into the water. Therefore, regular maintenance of the outboard discharge valve is essential for both the longevity of the engine and the health of marine environments.In addition to its primary function, the outboard discharge valve can also serve as an indicator of the engine's overall health. For instance, if the valve is not opening or closing properly, it may signal underlying issues such as blockages or mechanical failures. Boaters should be vigilant and conduct routine checks to ensure that this component is functioning correctly. By doing so, they can avoid costly repairs and ensure safe navigation on the waters.In conclusion, the outboard discharge valve is a small yet significant component in the realm of marine engineering. Its ability to regulate the flow of water not only aids in maintaining engine performance but also contributes to environmental preservation. For anyone involved in boating or marine engineering, understanding the role of the outboard discharge valve is essential. Through proper maintenance and awareness, boaters can ensure their vessels operate safely and efficiently, ultimately enhancing their overall experience on the water.

在海洋工程领域，各种组件在确保水上交通工具正常运作方面发挥着至关重要的作用。其中一个组件就是舷外排放阀，它在管理船舶内外流体的流动中起着重要作用。理解这一组件的重要性可以提供对保持船只安全和运行的复杂系统的深入了解。舷外排放阀主要用于安装在船舶外部的舷外发动机。这种类型的阀门允许控制从发动机舱释放水或其他流体，帮助保持最佳性能并防止过热。当舷外发动机运行时，它会产生热量作为燃烧的副产品。为了抵消这部分热量，水被吸入并循环通过发动机进行冷却。然而，一旦冷却过程完成，剩余的水就需要有效地排出。这就是舷外排放阀发挥作用的地方。舷外排放阀的设计对于其功能至关重要。它通常由一个基于系统内压力变化而开闭的机制组成。当由于水的涌入而导致压力增加时，阀门打开，允许加热的水排回海中。相反，当压力降低时，阀门关闭以防止任何回流。这种动态操作确保发动机保持在安全温度，从而延长其使用寿命并增强性能。此外，舷外排放阀还在环境保护中发挥着作用。通过确保仅排放必要量的水，它有助于防止污染并最小化对水生生态系统的影响。如果阀门发生故障，可能会导致过量排放，这可能会将有害物质引入水中。因此，定期维护舷外排放阀对于发动机的耐用性和海洋环境的健康至关重要。除了其主要功能外，舷外排放阀还可以作为发动机整体健康状况的指示器。例如，如果阀门没有正常开闭，可能会发出信号，表明存在阻塞或机械故障。船员应保持警惕，并进行例行检查，以确保该组件正常工作。通过这样做，他们可以避免昂贵的维修费用，并确保在水上安全航行。总之，舷外排放阀是海洋工程领域一个小而重要的组件。它调节水流动的能力不仅有助于维持发动机性能，还促进了环境保护。对于任何参与航海或海洋工程的人来说，理解舷外排放阀的作用至关重要。通过适当的维护和意识，船员可以确保他们的船只安全高效地运行，最终提升他们在水上的整体体验。