amperage

简明释义

英[ˈæmpərɪdʒ]美[ˈæmpərɪdʒ]

n. [电磁] 安培数

英英释义

单词用法

同义词

反义词

例句

1.This article introduces the early failure mechanisms easily happened at the initial production startup stage of high amperage pre-baked cell.

阐述了大型预焙电解槽生产初期的特点，及易出现早期破损的机理。

2.The torque and electrical amperage ratings below are therefore to be understood as theoretical absolute maximums and minimums.

扭矩和电器安培以下的评级，因此应理解为绝对的理论最大值和最小值。

3.To take advantage of fast-charging batteries, a car's electrics will have to be hardened up to cope with the huge amperage involved.

为了利用快速充电电池，要强化汽车电路以承载大电流。

4.Lightning has very high voltage and high amperage and can cause severe damage or injury.

闪电有很高的电压和高的电流量，能引起严重的损害或损伤。

5.In recent years, aluminum smelting technology has a remarkable change, the character of the current reduction pot is not only its high amperage but also its high efficiency.

最近几年来，铝电解技术产生了令人瞩目的变化，现代铝电解槽的特点不仅表现在大容量，更重要的是高效能。

6.In recent years, aluminum smelting technology has a remarkable change, the character of the current reduction pot is not only its high amperage but also its high efficiency.

最近几年来，铝电解技术产生了令人瞩目的变化，现代铝电解槽的特点不仅表现在大容量，更重要的是高效能。

7.Too high an amperage can cause wires to overheat.

过高的电流强度可能导致电线过热。

8.He adjusted the amperage on the power supply for better performance.

他调整了电源上的电流强度以获得更好的性能。

9.An increase in amperage can indicate a short circuit.

电流强度的增加可能表示短路。

10.The device requires a specific amperage to function properly.

该设备需要特定的电流强度才能正常工作。

11.The electrician measured the amperage to ensure the circuit was safe.

电工测量了电流强度以确保电路安全。

作文

Understanding the concept of electricity is essential in today's world, especially as we become increasingly reliant on electronic devices. One of the critical aspects of electricity is the flow of electric current, which is measured in terms of amperage. The term amperage refers to the strength of an electric current flowing through a conductor, expressed in amperes (A). This measure is vital for various applications, from household appliances to industrial machinery.To delve deeper into the significance of amperage, we must first understand its relationship with other electrical concepts such as voltage and resistance. According to Ohm's Law, the current (I) in a circuit is directly proportional to the voltage (V) across it and inversely proportional to the resistance (R) of the circuit. This can be mathematically represented as I = V/R. In this equation, amperage plays a crucial role, as it indicates how much current is flowing when a certain voltage is applied across a resistance.One practical example of amperage can be found in household wiring. Most homes have circuits that are rated for specific amperage levels, which determine how many devices can be safely used without overloading the system. For instance, a typical circuit may be rated for 15 or 20 amps. If the total amperage drawn by devices connected to that circuit exceeds its rating, it can lead to overheating and potentially cause a fire hazard.In addition to safety concerns, understanding amperage is also essential for optimizing energy efficiency. When selecting appliances, consumers often look at their power consumption, which is typically expressed in watts (W). However, to convert watts to amperage, one must consider the voltage of the circuit. For example, using the formula P = VI (where P is power in watts, V is voltage, and I is current in amperes), one can determine the amperage required for an appliance. This knowledge helps consumers make informed decisions about energy usage and costs.Furthermore, in the context of renewable energy systems, such as solar panels, amperage plays a significant role in system design and performance. Solar panels generate direct current (DC), and the total amperage produced depends on the amount of sunlight received and the efficiency of the panels. Understanding the amperage output is crucial for sizing inverters and batteries, ensuring that the energy produced can be effectively utilized or stored.In conclusion, amperage is a fundamental aspect of electrical engineering and everyday life. From ensuring safe household wiring to optimizing energy efficiency and supporting renewable energy systems, a solid understanding of amperage empowers individuals to navigate the complexities of electricity with confidence. As technology continues to evolve, the importance of understanding amperage will only increase, making it a vital topic for anyone interested in the world of electronics and energy management. By grasping this concept, one can appreciate the intricate balance of voltage, resistance, and current that powers our modern lives.

理解电力的概念在当今世界至关重要，尤其是随着我们对电子设备的日益依赖。电力的一个关键方面是电流的流动，其强度以amperage（安培数）来衡量。amperage一词指的是流经导体的电流强度，以安培（A）表示。这个测量对于各种应用至关重要，从家用电器到工业机械。要深入了解amperage的重要性，我们必须首先理解它与其他电气概念如电压和电阻的关系。根据欧姆定律，电路中的电流（I）与其电压（V）成正比，与电路的电阻（R）成反比。这个关系可以用公式I = V/R来表示。在这个方程中，amperage起着至关重要的作用，因为它指示在施加一定电压和电阻时流动的电流量。amperage的一个实际例子可以在家庭布线中找到。大多数家庭都有额定特定amperage水平的电路，这决定了在不超载系统的情况下可以安全使用多少设备。例如，一个典型的电路可能额定为15或20安培。如果连接到该电路的设备总amperage超过其额定值，可能会导致过热，并可能引发火灾风险。除了安全问题外，理解amperage对于优化能效也至关重要。在选择电器时，消费者通常会关注其功耗，通常以瓦特（W）表示。然而，要将瓦特转换为amperage，必须考虑电路的电压。例如，使用公式P = VI（其中P是瓦特，V是电压，I是安培），可以确定电器所需的amperage。这一知识帮助消费者做出关于能源使用和成本的明智决策。此外，在可再生能源系统（如太阳能电池板）的背景下，amperage在系统设计和性能中起着重要作用。太阳能电池板产生直流电（DC），而产生的总amperage取决于接收到的阳光量和面板的效率。理解amperage输出对于选择逆变器和电池至关重要，确保产生的能量能够有效利用或储存。总之，amperage是电气工程和日常生活的基本方面。从确保安全的家庭布线到优化能效，再到支持可再生能源系统，对amperage的深入理解使个人能够自信地应对电力的复杂性。随着技术的不断发展，理解amperage的重要性只会增加，使其成为任何对电子和能源管理感兴趣的人必不可少的话题。通过掌握这一概念，人们可以欣赏到电压、电阻和电流之间的微妙平衡，这些平衡支撑着我们现代生活的运转。