bulkhead

简明释义

英[ˈbʌlkhed]美[ˈbʌlkhed]

n. 隔板；防水壁

复 数 b u l k h e a d s

英英释义

单词用法

同义词

反义词

例句

1.There must be no damage to the bulkhead liner below.

在壁板衬垫下面没有损伤。

2.The ramp and bottom areas only applied one coat in crude oil tank, but all fittings, support, pipe and bulkhead should be finished two coat.

货油舱底所有舾装件、支架、管子、纵壁和横舱壁二度全部结束。

3.Solid bulk cargo must be strictly trimmed until to ambient bulkhead. If not enough, then heavy cargo package and baffler shall be supplied.

固体散装货物必须严格平舱，一直平整到货舱四周舱壁，如果对稳性还有严重影响，则再加压包和挡板措施。

4.There is a vertical waterproof longitudinal bulkhead between the two shell-junctures, it reinforced by some stiffener.

在两个圆弧柱壳连结处布置某种型式的垂向水密纵舱壁进行加强。

5.BULKHEAD, a structural partition in the fuselage or wing.

壁板式隔框，机身或机翼内一种结构隔板。

6.On this model it is not uncommon for rain water to drip onto the bulkhead connector at this point.

这一模式下，雨水在此环节滴到这一连接器上是很常见的。

7.Remove the inflammable material from the bulkhead.

从周围舱壁撤走易燃物质。

8.The ship's bulkhead is designed to prevent flooding in case of a leak.

船的舱壁旨在防止在漏水情况下发生洪水。

9.During the renovation, they discovered a damaged bulkhead that needed to be replaced.

在翻修过程中，他们发现一个受损的舱壁需要更换。

10.We installed a bulkhead in the basement to separate the storage area from the living space.

我们在地下室安装了一个隔墙，以将储存区与生活区分开。

11.A fire-resistant bulkhead was installed to enhance safety in the building.

安装了一个防火舱壁以提高建筑物的安全性。

12.The airplane's bulkhead provides structural support and separates different sections of the cabin.

飞机的舱壁提供结构支持并将客舱的不同部分分开。

作文

In the world of engineering and architecture, the term bulkhead refers to a vertical partition or barrier that is used to divide spaces within a structure. This term is commonly associated with ships, aircraft, and buildings, where it plays a crucial role in maintaining structural integrity and safety. Understanding the significance and applications of a bulkhead can provide insights into various fields such as naval architecture, civil engineering, and even interior design.On ships, bulkheads are essential for creating watertight compartments. These partitions help to prevent flooding in the event of a breach in the hull. For instance, if a ship sustains damage on one side, the bulkhead can contain the water, allowing the vessel to remain afloat and giving the crew time to address the situation. This safety feature is vital for the protection of both passengers and cargo, illustrating how a simple wall can have life-saving implications.In civil engineering, bulkheads are used to support soil and prevent erosion. They are often constructed along riverbanks or coastal areas to protect against the forces of nature. By holding back earth and water, these structures create stable environments for buildings and infrastructure. Additionally, bulkheads can be found in retaining walls, which are designed to retain soil on one side while allowing for a different elevation on the other. This application showcases how bulkheads contribute to land management and urban planning.The concept of a bulkhead also extends to the realm of interior design. In many commercial buildings, bulkheads are used to conceal ductwork, plumbing, and electrical systems. This not only enhances the aesthetic appeal of a space but also allows for more efficient use of resources. By integrating bulkheads into the design, architects can create cleaner lines and a more organized appearance in a room. Furthermore, bulkheads can also serve as sound barriers, helping to reduce noise pollution in busy environments.Moreover, the construction of bulkheads requires careful consideration of materials and engineering principles. Depending on their location and purpose, bulkheads may be made from steel, concrete, wood, or composite materials. Engineers must assess factors such as load-bearing capacity, environmental impact, and durability when designing these structures. This complexity highlights the importance of interdisciplinary collaboration among architects, engineers, and builders to ensure that bulkheads are effective and safe.In conclusion, the term bulkhead encompasses a variety of applications across different fields, each contributing to safety, stability, and aesthetics. Whether in maritime contexts, civil engineering projects, or interior design, bulkheads play a pivotal role in shaping our built environment. Understanding the functionality and significance of bulkheads not only enriches our knowledge of engineering and architecture but also emphasizes the importance of thoughtful design in creating safe and efficient spaces. As we continue to innovate and develop new structures, the role of bulkheads will undoubtedly evolve, reinforcing their place as fundamental components in the construction and design industries.

在工程和建筑的世界中，术语bulkhead指的是用于划分结构内部空间的垂直隔断或屏障。这个术语通常与船舶、飞机和建筑物相关联，在维护结构完整性和安全性方面发挥着至关重要的作用。理解bulkhead的意义和应用可以为海军建筑、土木工程甚至室内设计等多个领域提供见解。在船舶上，bulkheads对于创建防水舱室至关重要。这些隔断有助于防止在船体发生破损时的洪水。例如，如果一艘船的一侧受到损坏，bulkhead可以限制水流入，让船员有时间处理情况。这一安全特性对保护乘客和货物至关重要，说明了一个简单的墙壁可能具有拯救生命的意义。在土木工程中，bulkheads用于支撑土壤并防止侵蚀。它们通常建造在河岸或沿海地区，以抵御自然力量的侵害。通过保持土壤和水，bulkheads为建筑和基础设施创造了稳定的环境。此外，bulkheads还可以在挡土墙中找到，这些墙旨在在一侧保留土壤，同时允许另一侧有不同的高度。这一应用展示了bulkheads如何促进土地管理和城市规划。bulkhead的概念也延伸到室内设计领域。在许多商业建筑中，bulkheads用于隐藏管道、排水和电气系统。这不仅增强了空间的美学吸引力，还允许更有效地利用资源。通过将bulkheads整合到设计中，建筑师可以创造出更清晰的线条和更整洁的房间外观。此外，bulkheads还可以作为隔音屏障，帮助减少繁忙环境中的噪音污染。此外，bulkheads的建造需要仔细考虑材料和工程原理。根据其位置和用途，bulkheads可以由钢材、混凝土、木材或复合材料制成。工程师在设计这些结构时必须评估承载能力、环境影响和耐久性等因素。这种复杂性突显了建筑师、工程师和建筑商之间跨学科合作的重要性，以确保bulkheads的有效性和安全性。总之，术语bulkhead涵盖了不同领域的多种应用，每种应用都为安全、稳定和美学做出了贡献。无论是在海事背景、土木工程项目还是室内设计中，bulkheads在塑造我们的人造环境中扮演着关键角色。理解bulkheads的功能和重要性不仅丰富了我们对工程和建筑的知识，也强调了在创建安全高效空间时深思熟虑的设计的重要性。随着我们继续创新和开发新结构，bulkheads的角色无疑会不断演变，进一步巩固它们作为建筑和设计行业基本组成部分的地位。