overall height of crane

简明释义

起重机全高

英英释义

例句

1.Before starting the project, we need to measure the overall height of crane 起重机的总高度 to ensure it fits within the site limits.

在开始项目之前，我们需要测量整体高度的起重机 以确保它符合现场限制。

2.We need to account for the overall height of crane 起重机的总高度 when planning the layout of the construction site.

在规划施工现场布局时，我们需要考虑起重机的总高度 。

3.The overall height of crane 起重机的总高度 affects how it can be transported on public roads.

起重机的总高度 影响其如何在公共道路上运输。

4.The engineer specified that the overall height of crane 起重机的总高度 should not exceed 50 meters for safety reasons.

工程师指定起重机的总高度 出于安全原因不得超过50米。

5.During the inspection, we found that the overall height of crane 起重机的总高度 was incorrectly measured.

在检查过程中，我们发现起重机的总高度 测量不正确。

作文

When discussing construction equipment, one of the most crucial aspects to consider is the dimensions of the machinery involved. Among these dimensions, the overall height of crane plays a significant role in determining its suitability for various tasks. The overall height of crane refers to the total vertical measurement of the crane from its base to the highest point of the structure, which includes the boom and any additional attachments. Understanding this measurement is vital for several reasons.Firstly, the overall height of crane affects the crane's operational capabilities. Different construction sites have varying height restrictions based on zoning laws, nearby structures, or safety regulations. Knowing the overall height of crane allows project managers to ensure that the equipment can operate safely within these limitations. For instance, if a crane is too tall, it may not be able to work effectively in urban areas where buildings are closely packed together.Secondly, the overall height of crane impacts the crane's reach and lifting capacity. Cranes are designed to lift heavy materials to significant heights, but their effectiveness can be compromised if their height does not match the needs of the project. For example, if a construction project requires lifting steel beams to the top of a ten-story building, the overall height of crane must be sufficient to achieve this without risking accidents or equipment failure.Moreover, the overall height of crane is also a critical factor when considering transportation and setup. Cranes must be transported to job sites, and their height can affect the logistics of this process. If a crane's height exceeds certain limits, it may require special permits or even police escorts to navigate through city streets. Additionally, during setup, the overall height of crane must be taken into account to ensure that it can be assembled safely without interfering with overhead power lines or other structures.In terms of safety, understanding the overall height of crane is essential for preventing accidents on the construction site. Workers need to be aware of the crane's dimensions to maintain a safe distance from the machinery during operation. Furthermore, the overall height of crane can influence the design of safety protocols, such as exclusion zones where personnel should not enter while the crane is in operation.Finally, the overall height of crane can impact the overall cost of a construction project. Taller cranes often come with higher rental fees and may require more extensive safety measures, which can increase the project's budget. Therefore, careful consideration of the overall height of crane is necessary during the planning phase to ensure that the project remains within financial constraints.In conclusion, the overall height of crane is a fundamental aspect of crane operation that affects many facets of construction projects. From operational capabilities and safety considerations to logistical challenges and cost implications, understanding the overall height of crane is essential for anyone involved in construction management. By taking this measurement into account, professionals can make informed decisions that contribute to the success and safety of their projects.

在讨论建筑设备时，考虑机器的尺寸是至关重要的。其中，起重机的总体高度在确定其适用性方面发挥着重要作用。起重机的总体高度指的是从基座到结构最高点的总垂直测量，包括吊臂和任何附加附件。理解这一测量对于多个原因是至关重要的。首先，起重机的总体高度影响起重机的操作能力。不同的建筑工地根据区域法规、附近结构或安全规定有不同的高度限制。了解起重机的总体高度可以确保项目经理确保设备能够在这些限制内安全操作。例如，如果一台起重机太高，它可能无法在建筑物密集的城市地区有效工作。其次，起重机的总体高度影响起重机的作业范围和提升能力。起重机设计用于将重型材料提升到显著的高度，但如果其高度不符合项目的需求，其效果可能会受到影响。例如，如果一个建筑项目需要将钢梁提升到十层楼的顶部，则起重机的总体高度必须足够，以在不冒险发生事故或设备故障的情况下实现这一目标。此外，起重机的总体高度也是考虑运输和设置时的关键因素。起重机必须被运输到工作现场，其高度可能会影响这一过程的物流。如果起重机的高度超过某些限制，可能需要特殊许可证，甚至需要警察护送才能通过城市街道。此外，在设置过程中，起重机的总体高度必须被考虑，以确保它可以安全组装，而不会干扰上方的电线或其他结构。在安全方面，了解起重机的总体高度对于防止施工现场的事故至关重要。工人需要意识到起重机的尺寸，以保持在操作期间与机器之间的安全距离。此外，起重机的总体高度还可能影响安全协议的设计，例如在起重机操作期间人员不应进入的排除区。最后，起重机的总体高度可能会影响建筑项目的整体成本。更高的起重机通常伴随更高的租赁费用，并且可能需要更多的安全措施，这可能会增加项目的预算。因此，在规划阶段仔细考虑起重机的总体高度是必要的，以确保项目保持在财务约束之内。总之，起重机的总体高度是起重机操作的基本方面，影响建筑项目的许多方面。从操作能力和安全考虑到后勤挑战和成本影响，理解起重机的总体高度对于任何参与建筑管理的人都是至关重要的。通过考虑这一测量，专业人士可以做出明智的决策，为他们项目的成功和安全做出贡献。