intumescent

简明释义

英[ˌɪntjuːˈmesnt]美[ˌɪntjʊˈmesnt]

adj. 膨胀的；肿大的；隆起的；泡沸的

英英释义

单词用法

同义词

反义词

例句

1.The synergism of zeolite in selfmade intumescent flame retardant(IFR) was studied.

考察了分子筛在自制膨胀型阻燃体系（IFR）中的协效催化作用。

2.Methods Tri - combined operation of ECCE and PC - IOL with trabeculectomy was performed in 23 cases (23eyes) with acute secondary glaucoma caused by senile intumescent cataract.

方法对23例(23眼)老年性白内障膨胀期继发急性青光眼患者行白内障囊外摘除，后房型人工晶体植入联合小梁切除术治疗。

3.The influence of surface preparation agents on intumescent flame retardant system was researched by cone calorimeter.

利用锥形量热仪研究了表面处理剂对膨胀阻燃体系的影响；

4.The intumescent flame retardant melamine pyrophosphate was prepared by melamine and pyrophosphoric acid in solvent.

通过焦磷酸与三聚氰胺在溶剂中直接作用合成了膨胀型阻燃剂焦磷酸三聚氰胺。

5.The composition, preparation and mechanism of super thin intumescent coatings for steel structure were sketched out. Their relevant technical index has reached the expected requirement.

概述了超薄膨胀型钢结构防火涂料的组成、原理及制备，经试验，研制的防火涂料的相关指标达到了预想的要求。

6.In this paper, we have researched condition of preparation in laboratory of water soluble intumescent fire - retardant coating.

本文对水溶性膨胀型防火涂料的制备条件进行了实验室规模的探讨。

7.Products can be used in intumescent coating, PU rigid foam, thermoplastics and UP (unsaturated) resin etc.

所生产的阻燃剂可用于涂料、塑料、热固型树脂、纺织涂层等。

8.Fire protection mechanics, compositions, characteristic and development tendency of intumescent fire retardant coatings are introduced in the thesis.

介绍了膨胀型防火涂料的防火机理、组成、特点以及发展趋势。

9.The intumescent 膨胀型 sealant helps prevent smoke and flames from spreading through gaps.

这种intumescent 膨胀型密封剂有助于防止烟雾和火焰通过缝隙扩散。

10.The fireproof coating on the steel beams is an intumescent 膨胀型 material that expands when exposed to high temperatures.

钢梁上的防火涂层是一种在高温下会膨胀的intumescent 膨胀型材料。

11.Many architects specify intumescent 膨胀型 materials in their designs for safety reasons.

许多建筑师出于安全原因在设计中指定使用intumescent 膨胀型材料。

12.In building construction, intumescent 膨胀型 paints are often used to enhance fire resistance.

在建筑施工中，常使用intumescent 膨胀型涂料来增强防火性能。

13.During a fire, the intumescent 膨胀型 material swells, creating a protective barrier.

在火灾期间，intumescent 膨胀型材料会膨胀，形成保护屏障。

作文

In the realm of fire safety and construction, the term intumescent plays a crucial role in ensuring the protection of buildings and their occupants. An intumescent material is one that reacts to heat by expanding significantly, forming a charred layer that acts as an insulating barrier against fire. This property is particularly important in passive fire protection systems, where the goal is to prevent the spread of fire and maintain structural integrity during a blaze.The use of intumescent coatings has become increasingly popular in modern architecture. These coatings can be applied to steel beams, columns, and other structural elements to enhance their fire resistance. When exposed to high temperatures, the intumescent coating expands and forms a thick, protective layer that insulates the underlying steel from the heat of the fire. This is vital because steel loses its strength at elevated temperatures, which can lead to structural failure if not properly protected.One of the most significant advantages of using intumescent materials is their ability to provide long-lasting protection without compromising the aesthetic appeal of a building. Traditional fireproofing methods often involve bulky materials that can detract from the design of a space. In contrast, intumescent coatings are typically thin and can be painted over, allowing architects and designers to maintain the visual integrity of their projects while still adhering to fire safety regulations.Moreover, the environmental impact of intumescent materials is also a consideration in contemporary construction. Many intumescent products are designed to be eco-friendly, containing low levels of volatile organic compounds (VOCs) and being free from harmful chemicals. This aligns with the growing demand for sustainable building practices and materials that minimize harm to both people and the planet.However, it is essential to understand that the effectiveness of intumescent materials can be influenced by various factors, including the thickness of the application, the type of substrate they are applied to, and the specific fire exposure conditions. Therefore, proper installation and adherence to manufacturer guidelines are critical to ensure that the intumescent coatings perform as intended during a fire emergency.In conclusion, the significance of intumescent materials in fire safety cannot be overstated. They provide an innovative solution to protect structures from fire while allowing for creative architectural designs. As technology advances and our understanding of fire dynamics improves, the development of more effective intumescent products will likely continue, further enhancing the safety and resilience of buildings in our communities. The integration of intumescent materials into construction practices represents a proactive approach to fire safety, ultimately safeguarding lives and property in the face of potential fire hazards.

在消防安全和建筑领域，术语intumescent（膨胀型）在确保建筑物及其居住者的保护方面发挥着至关重要的作用。intumescent材料是指在热量作用下通过显著膨胀而反应的材料，形成一层炭化层，作为防火的绝缘屏障。这一特性在被动防火系统中尤为重要，其目标是防止火灾蔓延并在火灾期间保持结构的完整性。intumescent涂料的使用在现代建筑中变得越来越受欢迎。这些涂料可以涂覆在钢梁、柱子和其他结构元素上，以增强它们的耐火性。当暴露在高温下时，intumescent涂料会膨胀并形成厚厚的保护层，隔离底层的钢材免受火焰的热量。这一点至关重要，因为钢材在高温下会失去强度，如果没有得到适当的保护，就可能导致结构失效。使用intumescent材料的一个显著优势是，它们能够提供持久的保护，而不妨碍建筑的美观。传统的防火方法通常涉及笨重的材料，这可能会影响空间的设计。相比之下，intumescent涂料通常较薄，并且可以涂漆，从而允许建筑师和设计师在遵守防火安全法规的同时，保持项目的视觉完整性。此外，intumescent材料对环境的影响也是当代建筑中的一个考虑因素。许多intumescent产品被设计为环保，含有低水平的挥发性有机化合物（VOCs），并且不含有害化学物质。这与对可持续建筑实践和减少对人类和地球危害的材料的日益需求相一致。然而，必须理解的是，intumescent材料的有效性可能受到多种因素的影响，包括涂层的厚度、应用于的基材类型以及特定的火灾暴露条件。因此，正确的安装和遵循制造商的指南对于确保intumescent涂层在火灾紧急情况下按预期表现至关重要。总之，intumescent材料在消防安全中的重要性不容小觑。它们为保护结构免受火灾提供了创新的解决方案，同时允许创造性的建筑设计。随着技术的进步以及我们对火灾动力学的理解加深，更有效的intumescent产品的发展可能会继续，进一步增强我们社区中建筑物的安全性和韧性。将intumescent材料融入建筑实践代表了一种积极的消防安全方法，最终在潜在的火灾危险面前保护生命和财产。