obstruction beacon

简明释义

航空用)障碍物立标

英英释义

例句

1.The obstruction beacon 障碍灯 emits a red light to signal its presence to low-flying aircraft.

该obstruction beacon障碍灯发出红光，以向低飞的飞机发出信号。

2.The construction site was equipped with a flashing obstruction beacon 障碍灯 to warn nearby traffic.

施工现场配备了闪烁的obstruction beacon障碍灯以警告附近的交通。

3.Every tall building must have an operational obstruction beacon 障碍灯 as per aviation regulations.

根据航空法规，每栋高楼都必须有一个正常工作的obstruction beacon障碍灯。

4.During the night, the obstruction beacon 障碍灯 helps pilots identify potential hazards in the airspace.

在夜间，obstruction beacon障碍灯帮助飞行员识别空域中的潜在危险。

5.The airport installed new obstruction beacon 障碍灯 on the taller structures to ensure aircraft safety.

机场在较高的建筑物上安装了新的obstruction beacon障碍灯以确保飞机安全。

作文

In the world of aviation and maritime navigation, safety is paramount. One of the critical components that ensure this safety is the use of visual aids, particularly in areas where obstacles may pose a threat to aircraft or vessels. Among these aids, the obstruction beacon plays a vital role. An obstruction beacon is a type of light signal used to indicate the presence of a structure or obstacle that could interfere with the safe passage of aircraft or ships. These beacons are typically placed on tall buildings, communication towers, wind turbines, and other significant structures that extend into the airspace or navigable waters.The primary purpose of an obstruction beacon is to alert pilots and mariners about potential hazards in their vicinity. For instance, when flying at night or in poor visibility conditions, a pilot may not easily see a tall building or a transmission tower. The obstruction beacon, usually flashing or steady, provides a clear warning that helps them navigate safely. In aviation, these beacons are often colored red or white, depending on the specific regulations and the height of the obstruction. In maritime contexts, obstruction beacons serve a similar function. They are placed on buoys or fixed structures near shorelines to warn boats and ships about underwater hazards or shallow areas. Mariners rely on these signals to avoid collisions and ensure safe navigation through treacherous waters. Additionally, the use of obstruction beacons is governed by international regulations, which dictate their color, frequency of flashing, and placement to ensure consistency and effectiveness across different regions.Moreover, advancements in technology have led to the development of more sophisticated obstruction beacons. Modern versions may incorporate LED lights, which are more energy-efficient and have longer lifespans than traditional incandescent bulbs. Some beacons also include solar panels to power them, making them suitable for remote locations where electricity is unavailable. These innovations enhance the visibility and reliability of obstruction beacons, further improving safety for both air and sea travel.The importance of obstruction beacons cannot be overstated. They are essential for preventing accidents and ensuring that pilots and mariners can operate their vehicles safely. Without these visual indicators, the risk of collisions with tall structures would significantly increase, leading to potentially catastrophic consequences. Therefore, regulatory bodies continually emphasize the need for proper installation and maintenance of obstruction beacons to uphold safety standards.In conclusion, the obstruction beacon is a crucial safety feature in both aviation and maritime navigation. By providing clear warnings of obstacles, these beacons help prevent accidents and save lives. As technology continues to advance, we can expect even more efficient and effective obstruction beacons to emerge, further enhancing safety in our skies and waters. Understanding the significance of obstruction beacons is vital for anyone involved in these industries, as they play an indispensable role in ensuring safe travel for all.

在航空和海事导航的世界中，安全是最重要的。确保安全的关键组成部分之一是使用视觉辅助工具，特别是在障碍物可能对飞机或船只构成威胁的地区。在这些辅助工具中，障碍信标发挥着至关重要的作用。障碍信标是一种光信号，用于指示可能干扰飞机或船只安全通行的结构或障碍物的存在。这些信标通常放置在高楼大厦、通信塔、风力发电机和其他延伸到空域或可航行水域的重要结构上。障碍信标的主要目的是提醒飞行员和航海者注意他们附近潜在的危险。例如，在夜间飞行或能见度差的情况下，飞行员可能不容易看到高楼大厦或传输塔。障碍信标，通常是闪烁或稳定的，提供了清晰的警告，帮助他们安全导航。在航空领域，这些信标的颜色通常为红色或白色，具体取决于特定的规定和障碍物的高度。在海事环境中，障碍信标也发挥着类似的功能。它们放置在浮标或靠近海岸的固定结构上，以警告船只和船舶有关水下危险或浅水区。海员依赖这些信号来避免碰撞，并确保在危险水域中安全导航。此外，障碍信标的使用受到国际法规的监管，这些法规规定了它们的颜色、闪烁频率和位置，以确保不同地区的一致性和有效性。此外，技术的进步导致了更先进的障碍信标的发展。现代版本可能采用LED灯，这比传统的白炽灯更节能，使用寿命更长。一些信标还包括太阳能电池板为其供电，使其适合在没有电力的偏远地区使用。这些创新增强了障碍信标的可见性和可靠性，进一步提高了航空和海上旅行的安全性。障碍信标的重要性不容小觑。它们对于防止事故和确保飞行员和海员能够安全操作他们的车辆至关重要。如果没有这些视觉指示器，与高结构物发生碰撞的风险将显著增加，可能导致灾难性的后果。因此，监管机构不断强调需要正确安装和维护障碍信标以维持安全标准。总之，障碍信标是航空和海事导航中至关重要的安全特征。通过提供障碍物的清晰警告，这些信标帮助防止事故并拯救生命。随着技术的不断进步，我们可以期待出现更高效、更有效的障碍信标，进一步增强我们天空和水域的安全性。理解障碍信标的重要性对于任何参与这些行业的人来说都是至关重要的，因为它们在确保所有人安全旅行方面发挥着不可或缺的作用。