oil-tight cover

简明释义

油密盖

英英释义

例句

1.The manufacturer recommends using an oil-tight cover for the storage tank to avoid contamination.

制造商建议为储罐使用防油盖以避免污染。

2.The engine compartment was designed with an oil-tight cover to prevent leaks.

发动机舱的设计采用了防油盖以防止泄漏。

3.During maintenance, make sure the oil-tight cover is intact to prevent any spills.

在维护期间，请确保防油盖完好无损，以防止任何泄漏。

4.To ensure safety, always check that the oil-tight cover is properly sealed before starting the machine.

为了确保安全，在启动机器之前，请务必检查防油盖是否密封良好。

5.The laboratory requires all containers to have an oil-tight cover for hazardous materials.

实验室要求所有危险材料的容器都必须配备防油盖。

作文

In the world of engineering and manufacturing, the importance of proper sealing cannot be overstated. One crucial component in ensuring that machinery operates efficiently is the use of an oil-tight cover. An oil-tight cover is designed to prevent the leakage of oil, which is essential for lubricating moving parts and maintaining optimal performance. Without such a cover, machines may suffer from reduced efficiency, increased wear and tear, and ultimately, failure. The need for an oil-tight cover arises from the fact that many machines rely on oil as a lubricant. Oil helps to minimize friction between moving components, thereby reducing heat generation and preventing damage. However, if the oil leaks out due to inadequate sealing, the machine can overheat, leading to catastrophic failures. This is why manufacturers invest in high-quality materials and designs to create effective oil-tight covers.There are various materials used in the production of oil-tight covers, including rubber, plastic, and metal. Each material has its own advantages and disadvantages. For instance, rubber is highly flexible and provides excellent sealing properties, making it ideal for applications where there may be movement or vibration. On the other hand, metal covers are often more durable and can withstand higher temperatures and pressures, making them suitable for heavy-duty machinery.The design of an oil-tight cover is also critical. Engineers must consider factors such as the operating environment, temperature fluctuations, and potential exposure to chemicals when designing these covers. A well-designed oil-tight cover will not only keep the oil contained but also protect the internal components from dust, dirt, and moisture, which can compromise the integrity of the machinery.In addition to their functional benefits, oil-tight covers also play a role in safety and environmental protection. Oil spills can have devastating effects on the environment, contaminating soil and water sources. By ensuring that machinery is equipped with effective oil-tight covers, companies can reduce the risk of leaks and contribute to a safer, cleaner environment.Maintenance is another aspect where oil-tight covers come into play. Regular inspections and replacements of these covers are necessary to ensure that they continue to function effectively. Over time, exposure to heat, pressure, and chemicals can degrade the materials, leading to potential leaks. Therefore, it is essential for operators to be vigilant and proactive in maintaining their equipment.In conclusion, the significance of an oil-tight cover in machinery cannot be overlooked. It serves as a vital barrier that protects both the machinery and the environment. By investing in high-quality oil-tight covers and ensuring proper maintenance, manufacturers can enhance the longevity and efficiency of their equipment while minimizing the risk of environmental contamination. As technology continues to advance, the design and materials used for oil-tight covers will likely evolve, further improving their effectiveness and reliability in various applications.

在工程和制造的世界中，适当密封的重要性不容小觑。确保机械高效运转的一个关键组成部分是使用防油盖。防油盖旨在防止油泄漏，而油对于润滑运动部件和维持最佳性能至关重要。如果没有这样的盖子，机器可能会因效率降低、磨损加剧而最终失败。使用防油盖的必要性源于许多机器依赖油作为润滑剂。油有助于减少运动部件之间的摩擦，从而降低热量生成并防止损坏。然而，如果由于密封不当而导致油泄漏，机器可能会过热，导致灾难性的故障。这就是为什么制造商投资于高质量材料和设计，以创建有效的防油盖。制造防油盖时使用了多种材料，包括橡胶、塑料和金属。每种材料都有其优缺点。例如，橡胶高度灵活，提供出色的密封性能，非常适合可能有运动或振动的应用。而金属盖通常更耐用，能够承受更高的温度和压力，适合重型机械。防油盖的设计也至关重要。工程师在设计这些盖子时必须考虑操作环境、温度波动和潜在的化学暴露等因素。设计良好的防油盖不仅能保持油的密封，还能保护内部组件免受灰尘、污垢和湿气的侵害，这些都可能危及机械的完整性。除了功能性好处外，防油盖还在安全和环境保护中发挥作用。油泄漏可能对环境造成毁灭性影响，污染土壤和水源。通过确保机械配备有效的防油盖，公司可以降低泄漏风险，并为更安全、更清洁的环境做出贡献。维护是另一个与防油盖相关的方面。定期检查和更换这些盖子对于确保它们继续有效运作是必要的。随着时间的推移，暴露在热、压力和化学物质下可能会降解材料，导致潜在泄漏。因此，操作人员必须保持警惕，积极维护设备。总之，防油盖在机械中的重要性不容忽视。它作为保护机械和环境的重要屏障。通过投资高质量的防油盖并确保适当的维护，制造商可以提高设备的使用寿命和效率，同时最大限度地减少环境污染的风险。随着技术的不断进步，防油盖的设计和材料可能会不断演变，进一步提高其在各种应用中的有效性和可靠性。