moulded depth midship

简明释义

船中处型深

英英释义

例句

1.To comply with regulations, the moulded depth midship must be accurately measured.

为了遵守规定，中间模量深度必须准确测量。

2.The design of the hull takes into account the moulded depth midship for optimal performance.

船体设计考虑到中间模量深度以实现最佳性能。

3.The vessel's moulded depth midship is critical for stability during rough seas.

船只的中间模量深度在恶劣海况下对稳定性至关重要。

4.During the survey, we found that the moulded depth midship was less than expected.

在检查过程中，我们发现中间模量深度低于预期。

5.Engineers often analyze the moulded depth midship to ensure proper weight distribution.

工程师通常分析中间模量深度以确保适当的重量分布。

作文

The term moulded depth midship refers to a specific measurement in shipbuilding and naval architecture. It is defined as the vertical distance from the top of the keel to the upper deck at the midpoint of the vessel's length. This measurement is crucial for determining the ship's capacity, stability, and overall design. Understanding moulded depth midship is essential for engineers and designers as it influences various aspects of a ship's performance.When designing a vessel, the moulded depth midship is one of the primary dimensions that must be considered. It affects the volume of the ship's hull, which in turn impacts how much cargo or passengers the vessel can carry. A deeper hull allows for greater capacity, but it may also affect the ship's stability and resistance in the water. Therefore, naval architects must carefully balance the moulded depth midship with other dimensions such as beam and length to create an efficient and safe design.In addition to its importance in design, the moulded depth midship also plays a role in regulatory compliance. Ships must adhere to various international standards and regulations that dictate minimum and maximum dimensions for safety reasons. The moulded depth midship is often a focal point in these regulations, as it directly relates to the vessel's buoyancy and seaworthiness. Failure to comply with these standards can result in significant penalties and safety hazards.Furthermore, the moulded depth midship can influence the ship's hydrodynamic characteristics. A well-proportioned hull that incorporates an optimal moulded depth midship can reduce drag and improve fuel efficiency. This is particularly important in today's environmentally conscious world, where reducing emissions and improving fuel economy are paramount. Shipbuilders are increasingly focusing on designing vessels with an ideal moulded depth midship to enhance performance while minimizing environmental impact.In summary, the concept of moulded depth midship is integral to the field of naval architecture and shipbuilding. It not only determines the vessel's capacity and stability but also ensures compliance with safety regulations and enhances hydrodynamic efficiency. As the maritime industry continues to evolve, understanding and optimizing the moulded depth midship will remain a key focus for engineers and designers, ultimately leading to safer and more efficient vessels on the water.

术语moulded depth midship指的是船舶建造和海洋建筑中的一个特定测量。它被定义为从龙骨顶部到船体中点的上甲板之间的垂直距离。这个测量对于确定船舶的容量、稳定性和整体设计至关重要。理解moulded depth midship对于工程师和设计师来说是必不可少的，因为它影响着船舶性能的各个方面。在设计船舶时，moulded depth midship是必须考虑的主要尺寸之一。它影响船体的体积，这反过来又影响船舶可以承载多少货物或乘客。更深的船体允许更大的容量，但也可能影响船舶在水中的稳定性和阻力。因此，海洋建筑师必须仔细平衡moulded depth midship与其他尺寸，如宽度和长度，以创建高效和安全的设计。除了在设计中的重要性外，moulded depth midship还在合规性方面发挥作用。船舶必须遵守各种国际标准和规定，这些规定出于安全原因规定了最低和最高尺寸。moulded depth midship通常是这些规定的重点，因为它直接关系到船舶的浮力和适航性。不遵守这些标准可能会导致重大处罚和安全隐患。此外，moulded depth midship还会影响船舶的水动力特性。一个良好比例的船体，如果结合了最佳的moulded depth midship，可以减少阻力，提高燃油效率。这在当今环保意识日益增强的世界中尤为重要，减少排放和提高燃油经济性已成为重中之重。造船商越来越关注设计具有理想moulded depth midship的船舶，以提高性能，同时最小化对环境的影响。总之，moulded depth midship的概念是海洋建筑和船舶建造领域不可或缺的一部分。它不仅决定了船舶的容量和稳定性，还确保了遵守安全法规并增强了水动力效率。随着海事行业的不断发展，理解和优化moulded depth midship将始终是工程师和设计师的关键焦点，最终导致在水面上更安全、更高效的船舶。