minimum draught forward

简明释义

最小船首吃水

英英释义

The minimum draught forward refers to the least vertical distance between the waterline and the lowest point of the ship's hull at the bow, which is crucial for ensuring safe navigation and stability.

最小前吃水指的是船首水线与船体最低点之间的最小垂直距离,这对于确保安全航行和稳定性至关重要。

例句

1.The captain instructed the crew to ensure the minimum draught forward was not exceeded during the voyage.

船长指示船员在航行过程中确保不超过前方最小吃水深度

2.A lower minimum draught forward can help reduce resistance when navigating shallow waters.

较低的前方最小吃水深度可以帮助减少在浅水区航行时的阻力。

3.The ship's design ensures that the minimum draught forward is maintained at all times for optimal performance.

船舶的设计确保始终保持前方最小吃水深度以达到最佳性能。

4.In the event of heavy loading, adjustments must be made to maintain the minimum draught forward safely.

在重载情况下,必须进行调整以安全维持前方最小吃水深度

5.During loading operations, we need to monitor the minimum draught forward to prevent any stability issues.

在装载操作期间,我们需要监控前方最小吃水深度以防止任何稳定性问题。

作文

Understanding the concept of minimum draught forward is crucial for anyone involved in maritime operations, ship design, or naval architecture. The term refers to the least vertical distance between the waterline and the bottom of the ship's hull at the bow (the front part of the ship). This measurement is essential for ensuring that a vessel can navigate safely through various water conditions without running aground. A ship's minimum draught forward is particularly significant when it comes to entering shallow ports or navigating through narrow channels where depth is limited.The minimum draught forward is influenced by several factors including the ship's design, weight distribution, and loading conditions. When a ship is loaded, its weight pushes it deeper into the water, which can increase the draught. Conversely, when a ship is unloaded, its draught decreases. Therefore, understanding how to manage the cargo load effectively is vital for maintaining an appropriate minimum draught forward.In addition to safety considerations, the minimum draught forward also affects a ship's performance and fuel efficiency. A vessel that is too deep in the water may experience increased resistance as it moves through the waves, leading to higher fuel consumption and slower speeds. Conversely, a ship with an optimal minimum draught forward can achieve better hydrodynamic efficiency, resulting in lower operational costs. Ship operators must carefully monitor this measurement to ensure that they are not only complying with maritime regulations but also maximizing their vessel's performance.Moreover, the minimum draught forward plays a critical role in environmental considerations. Ships that operate with a draught that is too deep may cause damage to marine ecosystems, especially in shallow areas. By adhering to the recommended minimum draught forward, ship operators can help minimize their impact on the environment, protecting habitats and maintaining the balance of aquatic life.To illustrate the importance of the minimum draught forward, consider a situation where a cargo ship is approaching a port known for its shallow waters. If the ship's draught is greater than the depth of the water in the port, there is a significant risk of grounding, which can lead to costly damages and potential hazards for the crew and cargo. In such cases, it is essential for the captain and crew to have accurate knowledge of the minimum draught forward and to adjust their loading practices accordingly.In conclusion, the concept of minimum draught forward is a fundamental aspect of maritime navigation and ship management. It encompasses safety, operational efficiency, and environmental responsibility. By understanding and managing this measurement, ship operators can ensure safe voyages, optimize fuel consumption, and protect marine ecosystems. As the maritime industry continues to evolve, the significance of the minimum draught forward will remain a key consideration for all maritime professionals.

理解“minimum draught forward”这一概念对于任何参与海事操作、船舶设计或海军建筑的人来说都是至关重要的。这个术语指的是船体前部(船的前端)水线与船底之间的最小垂直距离。这个测量对于确保船只在各种水域条件下安全航行而不搁浅至关重要。“minimum draught forward”在进入浅水港口或通过水深有限的狭窄航道时尤为重要。“minimum draught forward”受到多个因素的影响,包括船舶设计、重量分布和装载条件。当船只装载时,其重量会使其更深地沉入水中,从而可能增加吃水。相反,当船只卸货时,吃水会减少。因此,了解如何有效管理货物负载对于保持适当的“minimum draught forward”至关重要。除了安全考虑外,“minimum draught forward”还影响船舶的性能和燃油效率。一艘吃水过深的船只在波浪中移动时可能会遇到更大的阻力,导致燃油消耗增加和速度降低。相反,具有最佳“minimum draught forward”的船只可以实现更好的水动力效率,从而降低运营成本。船舶运营商必须仔细监测这一测量,以确保他们不仅遵守海事法规,还最大化船舶的性能。此外,“minimum draught forward”在环境考虑中也发挥着关键作用。吃水过深的船只可能会对海洋生态系统造成损害,尤其是在浅水区。通过遵守推荐的“minimum draught forward”,船舶运营商可以帮助减少对环境的影响,保护栖息地,维持水生生命的平衡。为了说明“minimum draught forward”的重要性,考虑一种情况:一艘货船正在靠近一个以浅水闻名的港口。如果船只的吃水大于港口水深,就存在搁浅的重大风险,这可能导致昂贵的损失和对船员及货物的潜在危险。在这种情况下,船长和船员必须准确了解“minimum draught forward”并相应调整他们的装载实践。总之,“minimum draught forward”的概念是海事导航和船舶管理的基本方面。它涵盖了安全、运营效率和环境责任。通过理解和管理这一测量,船舶运营商可以确保安全航行,优化燃料消耗,并保护海洋生态系统。随着海事行业的不断发展,“minimum draught forward”的重要性将始终是所有海事专业人士需要考虑的关键事项。

相关单词

minimum

minimum详解:怎么读、什么意思、用法

draught

draught详解:怎么读、什么意思、用法