mooring bridle

简明释义

系在浮筒上的链或短缆

英英释义

例句

1.Before leaving the dock, always check the mooring bridle for any signs of wear.

在离开码头之前，总是要检查一下系泊缆是否有磨损的迹象。

2.Using a proper mooring bridle can prevent damage to the boat during high winds.

使用合适的系泊缆可以防止在强风中对船只造成损害。

3.The mooring bridle helps distribute the load evenly across the cleats.

系泊缆帮助将负荷均匀分配到系缆桩上。

4.The marina provided a tutorial on how to correctly tie a mooring bridle.

码头提供了关于如何正确系好系泊缆的教程。

5.The captain secured the boat using a mooring bridle, ensuring it wouldn't drift away.

船长使用系泊缆固定了船只，确保它不会漂走。

作文

When it comes to maritime operations, understanding the various components that contribute to the safety and stability of vessels is crucial. One such component is the mooring bridle, which plays a significant role in securing a ship to a dock or buoy. A mooring bridle is essentially a system of lines or cables that are used to connect a vessel to its mooring point. This setup not only helps in keeping the ship in place but also allows for some movement with the tides and winds, preventing damage to both the vessel and the docking facility.The design of a mooring bridle can vary depending on the size and type of the vessel, as well as the environmental conditions of the mooring location. Typically, a mooring bridle consists of two lines that extend from the vessel to a single point on the dock or buoy. This configuration provides stability and balance, distributing the forces acting on the ship more evenly. The use of a mooring bridle is particularly important in areas where strong currents or winds are prevalent, as it helps to minimize the risk of the vessel drifting away from its designated spot.In addition to its practical applications, the mooring bridle also reflects the importance of proper seamanship and safety practices in marine environments. Mariners must be knowledgeable about how to effectively deploy and adjust a mooring bridle to accommodate changing weather conditions and tidal movements. Failure to properly secure a vessel with a mooring bridle can lead to accidents, damage, or even loss of life in extreme cases.Moreover, the materials used in constructing a mooring bridle are vital for its effectiveness. High-quality ropes or chains that are resistant to wear and corrosion are essential to ensure the longevity and reliability of the mooring bridle. Regular inspections and maintenance of the mooring bridle should be conducted to identify any signs of wear and tear, allowing for timely replacements before they fail.In summary, the mooring bridle is an indispensable part of maritime operations that ensures the safety and security of vessels at their mooring points. Its design, functionality, and maintenance are critical aspects that every mariner must understand. By mastering the use of a mooring bridle, sailors can enhance their skills and contribute to safer navigation and docking practices in the ever-changing maritime environment.

当谈到海洋操作时，理解各种组成部分对于船只的安全和稳定至关重要。其中一个组成部分是系泊缰绳，它在将船只固定在码头或浮筒方面发挥着重要作用。系泊缰绳本质上是一种用于将船只连接到其系泊点的绳索或电缆系统。这种设置不仅有助于保持船只的位置，还允许船只随着潮汐和风的变化而移动，从而防止船只和停靠设施受到损坏。系泊缰绳的设计可以根据船只的大小和类型以及系泊位置的环境条件而有所不同。通常，系泊缰绳由两条绳索组成，它们从船只延伸到码头或浮筒的一个点。这种配置提供了稳定性和平衡，均匀分配作用在船只上的力量。在水流或风力较强的地区，使用系泊缰绳尤为重要，因为它有助于减少船只漂离指定位置的风险。除了其实际应用外，系泊缰绳还反映了在海洋环境中适当的航海技艺和安全实践的重要性。水手必须了解如何有效地部署和调整系泊缰绳以适应变化的天气条件和潮汐运动。如果未能妥善用系泊缰绳固定船只，可能会导致事故、损坏，甚至在极端情况下造成生命损失。此外，构建系泊缰绳所用的材料对其有效性至关重要。高质量的绳索或链条，具有耐磨和抗腐蚀的特性，对于确保系泊缰绳的耐用性和可靠性是必不可少的。应定期检查和维护系泊缰绳，以识别任何磨损迹象，从而在其失效之前及时更换。总之，系泊缰绳是海洋操作中不可或缺的一部分，确保船只在系泊点的安全和安稳。其设计、功能和维护是每位水手必须理解的关键方面。通过掌握系泊缰绳的使用，水手可以提升自己的技能，并为在不断变化的海洋环境中实现更安全的航行和停靠实践做出贡献。