maximum allowable working pressure

简明释义

最大许用工作压力

英英释义

例句

1.The engineers conducted tests to ensure that the pipe system operates below the maximum allowable working pressure (最大允许工作压力) to prevent any failures.

工程师们进行了测试，以确保管道系统的运行压力低于最大允许工作压力（最大允许工作压力），以防止任何故障。

2.The safety manual specifies the maximum allowable working pressure (最大允许工作压力) for each type of equipment used in the facility.

安全手册中规定了设施中使用的每种设备的最大允许工作压力（最大允许工作压力）。

3.During the inspection, the technician noted that the gauge was reading just below the maximum allowable working pressure (最大允许工作压力).

在检查过程中，技术人员注意到仪表的读数刚好低于最大允许工作压力（最大允许工作压力）。

4.Regular maintenance checks help ensure that the system does not exceed the maximum allowable working pressure (最大允许工作压力).

定期维护检查有助于确保系统不会超过最大允许工作压力（最大允许工作压力）。

5.Before installation, it is crucial to check the maximum allowable working pressure (最大允许工作压力) of all components.

在安装之前，检查所有组件的最大允许工作压力（最大允许工作压力）是至关重要的。

作文

Understanding the concept of maximum allowable working pressure is crucial in various engineering and industrial applications. This term refers to the highest pressure that a system can safely operate under without risking failure or accidents. The maximum allowable working pressure is determined by several factors, including the material properties of the components involved, the design specifications, and the environmental conditions. Engineers must carefully calculate this value to ensure the safety and reliability of equipment such as boilers, pipelines, and pressure vessels.In the context of a pressure vessel, for instance, the maximum allowable working pressure is often set during the design phase. It is influenced by the thickness of the vessel walls, the type of material used, and the manufacturing processes employed. If the pressure within the vessel exceeds this limit, it can lead to catastrophic failures, such as ruptures or explosions, which pose serious risks to personnel and the surrounding environment.Moreover, understanding the maximum allowable working pressure is not only important for the initial design but also for ongoing maintenance and operation. Regular inspections and testing are necessary to ensure that the equipment continues to operate safely within its specified limits. In some cases, wear and tear over time can reduce the effective pressure capacity of a system, necessitating adjustments to the maximum allowable working pressure.In industries such as oil and gas, chemical processing, and power generation, adhering to the maximum allowable working pressure guidelines is essential for compliance with safety regulations and standards. Regulatory bodies often mandate specific testing and certification processes to verify that equipment meets these safety requirements before it can be put into service.Furthermore, training personnel to understand the implications of the maximum allowable working pressure is vital for operational safety. Workers should be educated about the potential hazards associated with exceeding this pressure and the importance of monitoring systems to detect any anomalies. By fostering a culture of safety and awareness, organizations can significantly reduce the likelihood of accidents related to pressure management.In conclusion, the concept of maximum allowable working pressure is a fundamental aspect of engineering and safety in pressure-related applications. It encompasses a range of considerations from design and materials to maintenance and regulatory compliance. By ensuring that all systems operate within their designated limits, industries can protect their workforce, assets, and the environment from the dangers associated with excessive pressure. Understanding and respecting the maximum allowable working pressure is not just a technical requirement; it is a commitment to safety and responsibility in the workplace.

理解“最大允许工作压力”这一概念在各种工程和工业应用中至关重要。这个术语指的是一个系统可以安全运行的最高压力，超出这个压力将会面临失败或事故的风险。“最大允许工作压力”的确定受到多个因素的影响，包括所涉及组件的材料特性、设计规格和环境条件。工程师必须仔细计算这个值，以确保锅炉、管道和压力容器等设备的安全性和可靠性。以压力容器为例，“最大允许工作压力”通常在设计阶段设定。它受到容器壁厚、使用材料类型和制造工艺的影响。如果容器内的压力超过这个限制，可能导致灾难性的故障，如破裂或爆炸，这对人员和周围环境构成严重风险。此外，理解“最大允许工作压力”不仅对初始设计重要，还对持续的维护和操作至关重要。定期检查和测试是确保设备在其指定限度内安全运行的必要措施。在某些情况下，随着时间的推移，磨损和老化可能会降低系统的有效压力能力，从而需要调整“最大允许工作压力”。在石油和天然气、化工和发电等行业，遵守“最大允许工作压力”指南对符合安全法规和标准至关重要。监管机构通常要求进行特定的测试和认证程序，以验证设备在投入使用前是否符合这些安全要求。此外，培训人员理解“最大允许工作压力”的含义对于操作安全至关重要。工作人员应接受关于超出该压力的潜在危害以及监测系统以检测任何异常的重要性教育。通过培养安全和意识的文化，组织可以显著降低与压力管理相关的事故发生的可能性。总之，“最大允许工作压力”的概念是压力相关应用中工程和安全的基本方面。它涵盖了从设计和材料到维护和合规性的各种考虑。通过确保所有系统在其指定限制内运行，行业可以保护其员工、资产和环境免受过高压力带来的危险。理解和尊重“最大允许工作压力”不仅是技术要求；它是对工作场所安全和责任的承诺。