lubrication hole

简明释义

滑油孔

英英释义

例句

1.If you notice unusual noises from the engine, check the lubrication hole 润滑孔 for sufficient oil.

如果你注意到引擎发出异常声音，请检查 润滑孔 lubrication hole 是否有足够的油。

2.Regular maintenance includes inspecting the lubrication hole 润滑孔 to ensure proper oil flow.

定期维护包括检查 润滑孔 lubrication hole 以确保油流畅通。

3.The manual specifies the size of the lubrication hole 润滑孔 for optimal performance.

手册中规定了最佳性能所需的 润滑孔 lubrication hole 尺寸。

4.Before operating the machine, make sure to check the lubrication hole 润滑孔 for any blockages.

在操作机器之前，请确保检查一下 润滑孔 lubrication hole 是否有任何堵塞。

5.The technician used a needle to clear the lubrication hole 润滑孔 that was clogged with dirt.

技术人员使用针清理了被污垢堵塞的 润滑孔 lubrication hole。

作文

In the realm of machinery and engineering, maintaining optimal performance is crucial for the longevity and efficiency of any equipment. One of the essential components in this maintenance process is the concept of lubrication. Lubrication minimizes friction between moving parts, reducing wear and tear and ensuring smooth operation. A critical element in effective lubrication is the presence of a lubrication hole, which serves as an entry point for lubricant to flow into various mechanical systems.A lubrication hole (润滑孔) is typically a small opening designed to allow oil or grease to penetrate the internal mechanisms of machines. These holes are strategically placed in areas where friction is likely to occur, such as bearings, gears, and joints. By providing a direct pathway for lubricants, lubrication holes help to ensure that every moving part receives adequate lubrication, thereby preventing overheating and mechanical failure.The design and placement of a lubrication hole are vital considerations in the engineering process. Engineers must analyze the movement patterns of the machine's components to determine the most effective locations for these holes. If a lubrication hole is positioned incorrectly, it may lead to insufficient lubrication, resulting in increased friction and potential damage to the machinery. Conversely, too many lubrication holes can complicate the design and increase the risk of contamination from external particles.In addition to their physical design, the materials used for lubricants are also crucial. Different machines require different types of lubricants, and understanding the specific needs of each system is essential. For instance, high-speed machines may need lightweight oils that can flow easily, while heavy machinery may require thicker greases to withstand higher loads. The lubrication hole must be compatible with the chosen lubricant to ensure effective delivery and performance.Regular maintenance checks should include inspections of lubrication holes. It is important to ensure that these openings are not clogged or blocked, as this can prevent proper lubrication and lead to mechanical failures. Technicians often use specialized tools to clean and maintain lubrication holes, ensuring they remain functional and effective over time.Moreover, the role of technology in monitoring lubrication systems has grown significantly. Modern machines can be equipped with sensors that detect lubricant levels and flow rates through lubrication holes. This technology provides real-time data, allowing engineers to make informed decisions about maintenance and operation, ultimately enhancing the machine's performance and lifespan.In conclusion, the importance of a lubrication hole (润滑孔) cannot be overstated in the context of machinery maintenance. These small yet vital components play a significant role in ensuring that machines operate efficiently and reliably. By facilitating the flow of lubricants, lubrication holes help to minimize friction, reduce wear and tear, and extend the life of mechanical systems. As technology advances, the methods of monitoring and maintaining these lubrication systems will continue to evolve, further underscoring the critical role of lubrication holes in engineering and machinery design.

在机械和工程领域，保持最佳性能对任何设备的寿命和效率至关重要。在这一维护过程中，润滑的概念是一个基本组成部分。润滑可以减少运动部件之间的摩擦，降低磨损并确保平稳运行。有效润滑的一个关键要素是存在一个润滑孔，它作为润滑剂流入各种机械系统的入口。润滑孔（lubrication hole）通常是一个小开口，旨在允许油或 grease 渗透到机器的内部机制中。这些孔被战略性地放置在摩擦可能发生的区域，如轴承、齿轮和接头。通过提供润滑剂的直接通道，润滑孔有助于确保每个运动部件获得足够的润滑，从而防止过热和机械故障。润滑孔的设计和放置是工程过程中的重要考虑因素。工程师必须分析机器组件的运动模式，以确定这些孔的最佳位置。如果润滑孔的位置不正确，可能导致润滑不足，从而增加摩擦并可能损坏机械。相反，过多的润滑孔可能会使设计复杂化，并增加外部颗粒污染的风险。除了物理设计之外，润滑剂使用的材料也至关重要。不同的机器需要不同类型的润滑剂，了解每个系统的特定需求是必不可少的。例如，高速机器可能需要易于流动的轻质油，而重型机械可能需要更厚的 grease 以承受更高的负载。润滑孔必须与所选润滑剂兼容，以确保有效的输送和性能。定期维护检查应包括对润滑孔的检查。确保这些开口没有堵塞或阻塞非常重要，因为这可能会阻止适当的润滑并导致机械故障。技术人员通常使用专用工具清洁和维护润滑孔，确保它们随着时间的推移仍然功能正常且有效。此外，技术在监测润滑系统中的作用显著增强。现代机器可以配备传感器，检测通过润滑孔的润滑剂水平和流量。这项技术提供实时数据，使工程师能够就维护和操作做出明智的决策，从而最终提高机器的性能和使用寿命。总之，在机械维护的背景下，润滑孔（lubrication hole）的重要性不容忽视。这些小而关键的组件在确保机器高效可靠地运行方面发挥着重要作用。通过促进润滑剂的流动，润滑孔有助于最小化摩擦、减少磨损并延长机械系统的使用寿命。随着技术的进步，监测和维护这些润滑系统的方法将继续演变，进一步强调了润滑孔在工程和机械设计中的关键作用。