lot tolerance percent defective

简明释义

批内允许次品率

英英释义

例句

1.In our quality control process, we set the lot tolerance percent defective 批次容忍缺陷百分比 at 1% for critical components.

在我们的质量控制过程中，我们将关键部件的 批次容忍缺陷百分比 lot tolerance percent defective 设置为1%。

2.During the audit, it was found that the lot tolerance percent defective 批次容忍缺陷百分比 was not properly documented.

在审计过程中发现 批次容忍缺陷百分比 lot tolerance percent defective 并没有被正确记录。

3.The final inspection revealed that the lot tolerance percent defective 批次容忍缺陷百分比 was higher than acceptable levels.

最终检查显示 批次容忍缺陷百分比 lot tolerance percent defective 超出了可接受水平。

4.The manufacturer must ensure that the lot tolerance percent defective 批次容忍缺陷百分比 does not exceed 2% to meet quality standards.

制造商必须确保 批次容忍缺陷百分比 lot tolerance percent defective 不超过2%，以满足质量标准。

5.To improve customer satisfaction, the company decided to lower the lot tolerance percent defective 批次容忍缺陷百分比 from 5% to 3%.

为了提高客户满意度，公司决定将 批次容忍缺陷百分比 lot tolerance percent defective 从5%降低到3%。

作文

In the world of quality control and manufacturing, understanding various metrics is crucial for ensuring product reliability and customer satisfaction. One such important metric is the lot tolerance percent defective, which plays a significant role in determining the quality of a batch of products. The lot tolerance percent defective (LTPD) refers to the maximum percentage of defective items that can be considered acceptable in a lot or batch of goods. This statistic is vital for manufacturers, as it helps them establish quality standards and make informed decisions regarding production processes.When a manufacturer produces a batch of products, they need to ensure that the majority of those products meet quality standards. The lot tolerance percent defective provides a benchmark for this assessment. For instance, if a manufacturer sets an LTPD of 2%, it means that in a batch of 1,000 items, they can accept a maximum of 20 defective items. If the number of defects exceeds this threshold, the entire batch may be rejected, leading to potential financial losses and damage to the brand's reputation.Understanding the implications of the lot tolerance percent defective is essential for both manufacturers and consumers. From a manufacturer's perspective, maintaining a low LTPD is critical for minimizing waste and ensuring customer satisfaction. High defect rates can result in increased costs due to rework, returns, and loss of customer trust. Therefore, manufacturers often implement rigorous quality control measures to keep the defect rate within acceptable limits.On the other hand, consumers rely on the lot tolerance percent defective as an indicator of product reliability. When purchasing items, customers expect a certain level of quality. If they frequently encounter defective products from a particular brand, they may choose to switch to competitors who offer better quality assurance. Thus, the LTPD not only influences production practices but also shapes consumer perceptions and purchasing behavior.Moreover, the concept of lot tolerance percent defective is closely tied to statistical sampling methods. In many cases, manufacturers do not inspect every single item in a batch. Instead, they use statistical sampling techniques to estimate the overall quality of the lot. By analyzing a sample of products, they can infer whether the entire batch meets the established LTPD criteria. This approach saves time and resources while still providing a reliable assessment of product quality.In conclusion, the lot tolerance percent defective is a fundamental concept in quality control that helps manufacturers maintain high standards while minimizing waste. It serves as a crucial metric for assessing product quality and ensuring customer satisfaction. Both manufacturers and consumers benefit from a clear understanding of this term, as it influences production practices and purchasing decisions alike. As industries continue to evolve, the importance of maintaining a low LTPD will remain a key factor in achieving success in the competitive market landscape.

在质量控制和制造的世界中，理解各种指标对于确保产品可靠性和客户满意度至关重要。其中一个重要指标是批次容忍缺陷百分比，它在确定一批产品的质量方面发挥着重要作用。批次容忍缺陷百分比（LTPD）指的是在一批商品中可以接受的最大缺陷项目百分比。这个统计数据对制造商至关重要，因为它帮助他们建立质量标准并就生产过程做出明智的决策。当制造商生产一批产品时，他们需要确保大多数产品符合质量标准。批次容忍缺陷百分比为这种评估提供了基准。例如，如果制造商设定的LTPD为2%，这意味着在1000件商品中，他们最多可以接受20件缺陷商品。如果缺陷数量超过这个阈值，整个批次可能会被拒绝，这将导致潜在的财务损失和品牌声誉的损害。理解批次容忍缺陷百分比的含义对制造商和消费者都至关重要。从制造商的角度来看，保持低LTPD对于最小化浪费和确保客户满意度至关重要。高缺陷率可能导致因返工、退货和客户信任丧失而增加的成本。因此，制造商通常会实施严格的质量控制措施，以将缺陷率保持在可接受的范围内。另一方面，消费者依赖于批次容忍缺陷百分比作为产品可靠性的指标。在购买商品时，客户期望一定水平的质量。如果他们经常遇到某个品牌的缺陷产品，他们可能会选择转向提供更好质量保证的竞争对手。因此，LTPD不仅影响生产实践，还塑造消费者的认知和购买行为。此外，批次容忍缺陷百分比的概念与统计抽样方法密切相关。在许多情况下，制造商不会检查批次中的每一件商品。相反，他们使用统计抽样技术来估计整批产品的整体质量。通过分析样本产品，他们可以推断整个批次是否符合既定的LTPD标准。这种方法节省了时间和资源，同时仍然提供了可靠的产品质量评估。总之，批次容忍缺陷百分比是质量控制中的一个基本概念，帮助制造商在最小化浪费的同时维持高标准。它作为评估产品质量和确保客户满意度的关键指标。制造商和消费者都从对这一术语的清晰理解中受益，因为它影响生产实践和购买决策。随着行业的不断发展，保持低LTPD的重要性将继续成为在竞争激烈的市场环境中取得成功的关键因素。