maximum ship tonnage

简明释义

最大船舶吨位

英英释义

Maximum ship tonnage refers to the highest weight or volume capacity that a ship is designed to carry, usually measured in tons. This measurement can include the weight of cargo, passengers, and fuel.

最大船舶吨位是指一艘船设计承载的最高重量或体积容量,通常以吨为单位进行测量。这个测量可以包括货物、乘客和燃料的重量。

例句

1.The maximum ship tonnage 最大船舶吨位 for this canal is 20,000 tons, limiting the size of vessels that can pass through.

这条运河的最大船舶吨位为20,000吨,限制了可以通过的船只大小。

2.Regulations state that the maximum ship tonnage 最大船舶吨位 for this route is 30,000 tons.

规定指出,这条航线的最大船舶吨位为30,000吨。

3.The harbor can accommodate vessels with a maximum ship tonnage 最大船舶吨位 of 50,000 tons.

这个港口可以容纳最大船舶吨位为50,000吨的船只。

4.The shipping company must ensure that their fleet does not exceed the maximum ship tonnage 最大船舶吨位 allowed by the port.

航运公司必须确保其船队不超过港口允许的最大船舶吨位。

5.Due to the maximum ship tonnage 最大船舶吨位 restrictions, only smaller ships can dock here.

由于最大船舶吨位的限制,只有较小的船只可以在这里停靠。

作文

The term maximum ship tonnage refers to the greatest weight that a ship can safely carry, measured in tons. This measurement is crucial for ensuring the safety and efficiency of maritime operations. Understanding maximum ship tonnage is essential for various stakeholders in the shipping industry, including shipbuilders, operators, and regulatory bodies. Firstly, the maximum ship tonnage is determined by several factors, including the design of the vessel, its structural integrity, and the materials used in its construction. Each ship is built to withstand specific loads, and exceeding this limit can lead to catastrophic failures, such as capsizing or sinking. Therefore, engineers must carefully calculate the maximum ship tonnage during the design phase to ensure that the ship can operate safely under various conditions. Moreover, the maximum ship tonnage also plays a significant role in port operations. Ports have limitations on the size and weight of vessels they can accommodate. For instance, a port may have a maximum ship tonnage restriction due to shallow waters or inadequate docking facilities. This means that ships must adhere to these limits to avoid grounding or damaging the port infrastructure. Consequently, understanding the maximum ship tonnage helps shipping companies plan their routes and select appropriate ports for loading and unloading cargo. In addition, the environmental impact of shipping is closely linked to maximum ship tonnage. Larger ships tend to be more fuel-efficient per ton of cargo transported, which can reduce greenhouse gas emissions per unit of freight. However, if a ship exceeds its maximum ship tonnage, it may lead to increased fuel consumption and pollution. Thus, maintaining compliance with the maximum ship tonnage is not only a matter of safety but also of environmental responsibility. Furthermore, regulations surrounding maximum ship tonnage are enforced by international maritime organizations, such as the International Maritime Organization (IMO). These regulations are designed to protect both the marine environment and human life at sea. Ships must undergo inspections and certifications to verify that they do not exceed their maximum ship tonnage. Non-compliance can result in hefty fines and the suspension of operating licenses. In conclusion, the concept of maximum ship tonnage is fundamental to the shipping industry. It encompasses safety, operational efficiency, environmental considerations, and regulatory compliance. Stakeholders must understand and respect these limits to ensure safe and sustainable maritime practices. As global trade continues to expand, the importance of adhering to maximum ship tonnage will only grow, highlighting the need for ongoing education and vigilance within the industry.

术语最大船舶吨位指的是一艘船可以安全承载的最大重量,以吨为单位进行测量。这个测量对确保海事操作的安全和效率至关重要。理解最大船舶吨位对航运行业的各个利益相关者,包括造船商、运营商和监管机构来说都是必不可少的。首先,最大船舶吨位由多个因素决定,包括船只的设计、结构完整性以及所用材料。每艘船都建造得能够承受特定的负载,超出这一限制可能导致灾难性的故障,例如翻船或沉没。因此,工程师必须在设计阶段仔细计算最大船舶吨位,以确保船只在各种条件下安全运行。此外,最大船舶吨位在港口运营中也发挥着重要作用。港口对其能够容纳的船只的大小和重量有一定限制。例如,由于水浅或码头设施不足,一个港口可能会对最大船舶吨位施加限制。这意味着船只必须遵守这些限制,以避免搁浅或损坏港口基础设施。因此,理解最大船舶吨位帮助航运公司规划航线并选择合适的港口进行装卸货物。此外,航运的环境影响与最大船舶吨位密切相关。较大的船舶在每吨货物运输方面往往更具燃油效率,这可以减少每单位货运的温室气体排放。然而,如果一艘船超过其最大船舶吨位,可能会导致燃料消耗和污染增加。因此,保持符合最大船舶吨位的标准不仅是安全问题,也是环境责任问题。此外,围绕最大船舶吨位的法规由国际海事组织(IMO)等国际海事组织执行。这些法规旨在保护海洋环境和海上人类生命。船只必须经过检查和认证,以验证它们是否超过了其最大船舶吨位。不合规可能会导致巨额罚款和运营许可证的暂停。总之,最大船舶吨位的概念对航运行业至关重要。它涵盖了安全、运营效率、环境考虑和法规合规。利益相关者必须理解并尊重这些限制,以确保安全和可持续的海事实践。随着全球贸易的不断扩展,遵守最大船舶吨位的重要性只会增加,这突显了行业内持续教育和警惕的必要性。

相关单词

maximum

maximum详解:怎么读、什么意思、用法

tonnage

tonnage详解:怎么读、什么意思、用法